Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0011860 (type 2 diabetes)
 57,723 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The software driving the Cerec CAD/CAM system has recently been updated. In this study, the marginal accuracy of computer-machined porcelain inlays was determined using the original and the updated software. Two types of MOD cavities in Frasaco resin teeth were prepared with either sharp or rounded box corners. The distance of the occlusal and proximal marginal interface was determined using a measuring microscope. The mean occlusal interfacial distance was 52 microns for both programs. Only the box corners showed a significantly larger space, of which the mean value was approximately 200 microns. The updated version improved the marginal accuracy at the box corners. Further reduction of the interfacial distance was accomplished by rounding the sharp box corners.
 ...
PMID:Marginal accuracy of CAD/CAM inlays made with the original and the updated software. 162 22

In order to improve the accuracy of the three dimensional shape measurement, the divisional measurement method, which tilts and rotates the abutment teeth was attempted. This system is composed of a high precision laser displacement meter, teeth model scanning machine and personal computer. For the measurement of a crown abutment tooth with indistinct margin lines, the measuring area was divided into four regions of the mesio-distal sides and the buccal-lingual sides. The tooth was tilted on the gonio stage +/- 30 degrees around the mesio and distal direction, rotated 180 degrees around the tooth axis, and measured divisionally. The partial data thus obtained were combined by means of the software program into the composed data. Using this method of measurement, the margin of the abutment tooth was recognizable, and the faulted data, which arose from shielding of the receiving beam, was eliminated. Overlapping data from divisional measurements were deducted and the complete data for the single abutment tooth was saved into a file. In the case of a MOD inlay abutment tooth, the divisional measurements with only rotation were carried out, since each curved wall makes nearly a square angle and sharp boundary. A couple of data sets were combined and complete data without error was obtained. Thus, measurements of abutment teeth were obtained without error. It is possible to get the basic data for the production of crown and inlay by means of CAM technique.
 ...
PMID:[Three dimensional shape measurement of teeth (3). The divisional measurement method of abutment teeth]. 249 Nov 66

This in vitro study compared the marginal adaptation of CAD/CAM and laboratory-made ceramic inlays before, during and after loading. Six MOD inlay preparations of standardized design with one cervical margin in dentine and the other in enamel were prepared for each inlay type: CAD/CAM fabricated MGC-glass ceramic inlays, CAD/CAM fabricated feldspathic porcelain inlays, laboratory-made glass ceramic inlays and laboratory-made feldspathic porcelain inlays. Appropriate luting composite materials were used. The restored teeth were subjected to occlusal loading, thermal cycling, toothbrush-toothpaste abrasion and chemical degradation in vitro. Marginal adaptation was quantitated along the entire length of the cavosurface margin and along selected sections of the margin using SEM, following in vitro testing corresponding to 0, 0.5, 1.0, 2.7 and 5.0 years of clinical service. In addition, marginal fit of the cemented inlays was evaluated in the SEM. The initial marginal adaptation in enamel was excellent in all groups. After in vitro testing, significant marginal discrepancies were found in all groups. A high percentage of marginal openings was recorded, notably in the cervical portions of the margins in both enamel and dentine.
 ...
PMID:Marginal adaptation and fit of adhesive ceramic inlays. 842 82

To evaluate whether granulocyte-colony stimulating factor (G-CSF) improves an impaired production of oxygen-derived free radicals by neutrophils from poorly controlled NIDDM patients, we studied the effect of G-CSF on myeloperoxidase (MPO) activity and chemiluminescence amplified by a Cypridina luciferin analog (CLA-DCL), which is dependent on O2 generation, and luminol (L-DCL), which is dependent on OCl(-) generation, in response to formyl-methonyl-leucyl-phenylalanine. Both CLA-DCL and L-DCL by neutrophils from the diabetic group (n = 15, HbA(1c) >10%) were significantly decreased (26 and 37%, respectively: P < 0.01) compared with the age-matched normal control group (n = 15), and L-DCL was more sensitive to this inhibition than CLA-DCL (P < 0.05). In both control and diabetic neutrophils, G-CSF significantly enhanced both CLA-DCL (175% in control and 156% in diabetic) and L-DCL (283% in control and 346% in diabetic). In diabetic neutrophils, the enhancing effect of G-CSF on L-DCL was more sensitive than on CLA-DCL (P < 0.001). There was a positive correlation between HbA(1c) and the enhancing effect of G-CSF on L-DCL in diabetic patients (P < 0.05), but not on CLA-DCL. MPO activity was also decreased in the diabetic group (63%, P < 0.05), and G-CSF improved this impaired MPO activity (184%, P < 0.01). Furthermore, there was a positive correlation between HbA(1c) and the improving effect of G-CSF on MPO activity (P < 0.05). Because bacterial infection still accounts for an important cause of morbidity and mortality in diabetic patients, these data suggest that G-CSF may be useful as a drug to prevent the aggravation of bacterial infection by improving neutrophil function, especially through H2O2-MPO-OCl(-) mechanism, in poorly controlled diabetic patients.
 ...
PMID:Effect of granulocyte-colony stimulating factor on generation of oxygen-derived free radicals and myeloperoxidase activity in neutrophils from poorly controlled NIDDM patients. 897 Oct 93

The relationship between insulin resistance, soluble adhesion molecules E-selectin (sE-selectin), intracellular adhesion molecule-1 (sICAM-1), and vascular adhesion molecule-1 (sVCAM-1), mononuclear cell binding to cultured endothelium, and lipoprotein concentrations were evaluated in 28 healthy, nondiabetic, and normotensive individuals. The mean (+/-SEM) lipid and lipoprotein concentrations were within the normal rage: cholesterol (199 +/- 18 mg/dL); triglyceride (128 +/- 12 mg/dL); low-density cholesterol (127 +/- 8 mg/dL; and high-density cholesterol (47 +/- 3 mg/dL). The results indicated that degree of insulin resistance was significantly correlated with concentrations of sE-selectin (r = 0.54, P < 0.005), sICAM-1 (r = 0.67, P < 0.001), and sVCAM-1 (r = 0.41, P < 0.05). Furthermore, the relationship between insulin resistance and both sE-selectin and sI-CAM-1 remained statistically significant when adjusted for differences in age, gender, body mass index, and all measures of lipoprotein concentrations. Finally, mononuclear cell binding correlated significantly with concentrations of sE-selectin (r = 0.54, P < 0.005) and sICAM-1 (r = 0.47, P < 0.01). These findings raise the possibility that previously described relationships between soluble adhesion molecules in patients with hypertension, type 2 diabetes, and dyslipidemia may be due to the presence of insulin resistance in these clinical syndromes and suggests that insulin resistance may predispose individuals to coronary heart disease by activation of cellular adhesion molecules.
 ...
PMID:Relationship between insulin resistance, soluble adhesion molecules, and mononuclear cell binding in healthy volunteers. 1052 84

To explore the possibility that b type recombinant human granulocyte-colony stimulating factor (rhG-CSF) is a useful drug to prevent the morbidity and mortality caused by infections in diabetic patients, we have studied effects of rhG-CSF on chemiluminescence amplified by a luciferin analog (CLA-DCL) and luminol (L-DCL) in response to formyl-Methionyl-Leucyl-Phenylalanine (fMLP) in neutrophils from patients with non insulin dependent diabetes mellitus (NIDDM) (diabetic neutrophils) and healthy subjects (control neutrophils). Both CLA-DCL and L-DCL in diabetic neutrophils were significantly reduced, and L-DCL was more sensitive to this suppression than CLA-DCL. RhG-CSF did not change the basal chemiluminescence in control and diabetic neutrophils, but it primed CLA-DCL and L-DCL. Although, in diabetic neutrophils, the priming effect of rhG-GSF on both CLA-DCL and L-DCL was less compared to that in control neutrophils, L-DCL was more sensitive to this priming effect than CLA-DCL. Because bacterial infection is still an important cause of the morbidity and mortality in diabetic patients, these data suggest that rhG-CSF is a useful drug to prevent the aggravation of bacterial infection in patients with NIDDM.
 ...
PMID:Improvement of an impaired chemiluminescence response to formyl-methionyl-leucyl-phenylalanine in neutrophils from patients with non insulin dependent diabetes mellitus by recombinant human granulocyte-colony stimulating factor. 1058 72

The objectives of this study include comparing the cement thickness and microleakage of Class II ceramic inlays built with three ceramic systems and verifying whether there was a correlation between those two variables. The ceramic systems used include: 1) Heat-pressed (IPS-Empress); 2) CAD-CAM (CEREC 2) and 3) Sintered (Colorlogic). Standardized MOD Class II inlay cavities with one proximal box extending below and the other extending above the cement-enamel junction (CEJ) were prepared in 30 extracted human molars and randomly assigned to three groups. The ceramic inlays were constructed according to manufacturer's instructions and cemented using a dual-cure resin cement (Variolink II). All teeth were mechanically cycled (100,000 cycles, 78N) and thermocycled (700 cycles, 5 degrees C-55 degrees C). After immersion in silver nitrate, the inlays were sectioned mesial-distally and evaluated with an optical microscope (40x). The cement thickness obtained by the Colorlogic system (enamel: 113 +/- 25 microm; dentin: 118 +/- 23 microm) was significantly higher than that obtained by CEREC (enamel: 78 +/- 14 microm; dentin: 87 +/- 13 microm) and Empress (enamel: 65 +/- 15 microm; dentin: 89 +/- 14 microm). Regarding dye penetration, there was no statistical difference among the three ceramic systems in enamel. At the dentin margins, the Colorlogic system resulted in a significantly higher penetration depth compared to CEREC and Empress, which had similar average values. No correlation was found between cement thickness and microleakage either in enamel or dentin for any of the ceramic systems.
 ...
PMID:Correlation between microleakage and cement thickness in three Class II inlay ceramic systems. 1508 34

The aim of the present study was to characterize plasma lipids and lipoprotein cholesterol and glucose concentrations in hamsters fed either cis-9,trans-11 CLA (9c,11 tCLA); trans-10,cis-12 CLA (10t,12c CLA); or linoleic acid (LA) on the accumulation of aortic cholesterol in hypercholesterolemic hamsters. One hundred male F1B strain Syrian Golden Hamsters (Mesocricetus auratus) (BioBreeders Inc., Watertown, MA) approximately 9 wk of age were housed in individual stainless steel hanging cages at room temperature with a 12-h light/dark cycle. Hamsters were given food and water ad libitum. Following a 1-wk period of acclimation, the hamsters were fed a chow-based (nonpurified) hypercholesterolemic diet (HCD) containing 10% coconut oil (92% saturated fat) and 0.1% cholesterol for 2 wk. After an overnight fast, the hamsters were bled and plasma cholesterol concentrations were measured. The hamsters were then divided into 4 groups of 25 based on similar mean plasma VLDL and LDL cholesterol (nonHDL-C) concentrations. Group 1 remained on the HCD (control). Group 2 was fed the HCD plus 0.5% 9c,11t CLA isomer. Group 3 was fed the HCD plus 0.5% 10t,12c CLA isomer. Group 4 was fed the HCD plus 0.5% LA. Compared with the control, both CLA isomers and LA had significantly lower plasma total cholesterol and HDL cholesterol concentrations (P < 0.001) after 12 but not 8 wk of treatment and were not significantly different from each other. Also, both CLA isomers had significantly lower plasma nonHDL-C concentrations (P < 0.01) compared with the control after 12 but not 8 wk of treatment and were not significantly different from each other or the LA-fed hamsters. Plasma TG concentrations were significantly higher (P < 0.004) with the 10t, 12c CLA isomer compared with the other treatments at 8 but not at 12 wk of treatment. Plasma TG concentrations were also significantly lower (P < 0.03) with the 9c,11t CLA isomer compared with the control at 12 wk of treatment. Also, the 10t,12c CLA isomer and LA had significantly higher plasma glucose concentrations compared with the control and 9c,11t CLA isomer (P < 0.008) at 12 wk of treatment, whereas at 8 wk, only the LA treatment had significantly higher plasma glucose concentrations (P < 0.001) compared with the 9c,11t CLA isomer. Although liver weights were significantly higher in 10t,12c CLA isomer-fed hamsters, liver total cholesterol, free cholesterol, cholesterol ester, and TG concentrations were significantly lower in these hamsters compared with hamsters fed the control, 9c,11t CLA isomer, and LA diets (P< 0.05). The 9c,11t CLA isomer and LA diets tended to reduce cholesterol accumulation in the aortic arch, whereas the 10t,12c CLA isomer diet tended to raise cholesterol accumulation compared with the control diet; however, neither was significant. In summary, no differences were observed between the CLA isomers for changes in plasma lipids or lipoprotein cholesterol concentrations. However, the 9c,11t CLA isomer did appear to lower plasma TG and glucose concentrations compared with the 10t,12c CLA isomer. Such differences may increase the risk of insulin resistance and type 2 diabetes in humans when the 10t,12c CLA isomer is fed separately.
 ...
PMID:Conjugated linoleic acid isomers reduce blood cholesterol levels but not aortic cholesterol accumulation in hypercholesterolemic hamsters. 1655 70

The composite luting gap between ceramic and dental hard tissue can be termed an "Achilles heel". Therefore, one major goal of luting ceramics focuses on minimizing the inter-marginal gap area. This study evaluated the marginal accuracy of two all-ceramic systems. The null hypothesis was that there is no statistical difference between the marginal accuracy of the IPS Empress and Cerec 3D all-ceramic systems. On 16 casts, representing different clinical situations, the left first mandibular molar was prepared to receive large onlays (MOD and replacement of the distobuccal and distal cusps). For each cavity, one laboratory heat-pressed (IPS Empress) and one chairside CAD/CAM restoration (Cerec 3D) were manufactured. A newly developed milling unit was used for CAM processing. The restorations were placed in their respective cavities and die replicas were taken and examined under SEM for quantitative gap measurement. The gap width was measured at 11 defined landmarks by two different examiners. An overall gap width of 56 microm (+/- 31 microm) was measured for IPS Empress, compared to the significantly increased value of 70 pm (+/- 32 microm) for Cerec 3D. From a clinical viewpoint, the statistically significant difference between the two systems is not relevant, since both systems still exhibit a clinically acceptable gap width of less than 100 microm.
 ...
PMID:Marginal fit of heat-pressed vs. CAD/CAM processed all-ceramic onlays using a milling unit prototype. 1905 57

PED/PEA-15 is a 15-kDa ubiquitously expressed protein implicated in a number of fundamental cellular functions, including apoptosis, proliferation, and glucose metabolism. PED/PEA-15 lacks enzymatic function and serves mainly as a molecular adaptor. PED/PEA-15 is an endogenous substrate for protein kinase C (PKC), calcium/calmodulin-dependent protein kinase II (CAM kinase II), and Akt. In particular, PKC phosphorylates PED/PEA-15 at Ser(104) and CAM kinase II or Akt at Ser(116), modifying its stability. Evidence obtained over the past 10 years has indicated that PED/PEA-15 regulates cell survival by interfering with both intrinsic and extrinsic apoptotic pathways. In addition, it may also control cell proliferation by interfering with ERK1/2-mediated pathways. Indeed, PED/PEA-15 has been identified as an ERK1/2 interactor, which modifies its subcellular localization and targeting to a specific subset of substrates. Increased PED/PEA-15 levels may affect tumorigenesis and cancer progression as well as sensitivity to anticancer agents. Moreover, PED/PEA-15 affects astrocyte motility and increases susceptibility to skin carcinogenesis in vivo. PED/PEA-15 expression is regulated at the transcriptional and the posttranslational levels. Increased PED/PEA-15 expression has been identified in individuals with type 2 diabetes early during the natural history of the disease. Evidence generated over the past 10 years indicated that this defect contributes to altering glucose tolerance by impairing insulin action and insulin secretion and might play a role in the development of diabetes-associated neurological disorders. Strategies are being devised to target key signaling events in PED/PEA-15 action aimed at improving glucose tolerance and at facilitating cancer cell death.
 ...
PMID:Frontiers: PED/PEA-15, a multifunctional protein controlling cell survival and glucose metabolism. 1953 39


1 2 Next >>