Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0002986 (Fabry)
 5,646 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Low loss high mesa optical waveguides were fabricated on InGaAsP/InP heterostructures by utilizing inductively-coupled-plasma reactive ion etching (ICP-RIE) and electron beam lithography technique. The fabrication process was optimized by measuring sidewall roughness of deep-etched waveguides. Atomic force microscope loaded with carbon nanotude was used to obtain three-dimensional image of the etched sidewall of waveguides. The obtained statistical information such as rms roughness and correlation length was used to theoretically calculate scattering loss of waveguides. Several waveguides with different number of sharp bends and the length were fabricated and their propagation losses were measured by modified Fabry-Perot method. The measured propagation losses were compared with theoretically calculated losses.
 ...
PMID:Low loss high mesa optical waveguides based on InGaAsP/InP heterostructures. 1725 12

Following our recent interest in metamaterial-based devices supporting resonant tunneling, energy squeezing, and supercoupling through narrow waveguide channels and bends, here we analyze the fundamental physical mechanisms behind this phenomenon using a transmission-line model. These theoretical findings extend our theory, allowing us to take fully into account frequency dispersion and losses and revealing the substantial differences between this unique tunneling phenomenon and higher-frequency Fabry-Perot resonances. Moreover, they represent the foundations for other possibilities to realize tunneling through arbitrary waveguide bends, both in E and H planes of polarization, waveguide connections, and sharp abruptions and to obtain analogous effects with geometries arguably simpler to realize.
 ...
PMID:Transmission-line analysis of epsilon -near-zero-filled narrow channels. 1876 71

Oblique propagation of semi-guided waves across slab waveguide structures with bent corners is investigated. A critical angle can be defined beyond which all radiation losses are suppressed. Additionally an increase of the curvature radius of the bends also leads to low-loss configurations for incidence angles below that critical angle. A combination of two bent corner systems represents a step-like structure, behaving like a Fabry-Perot interferometer, with two partial reflectors separated by the vertical height between the horizontal slabs. We numerically analyse typical high-index-contrast Si/SiO2 structures for their reflectance and transmittance properties. When increasing the curvature radius the resonant effect becomes less relevant such that full transmittance is reached with less critical conditions on the vertical distance or the incidence angle. For practical interest 3-D problems are considered, where the structures are excited by the fundamental mode of a wide, shallow rib waveguide. High transmittance levels can be observed also for these 3-D configurations depending on the width of the rib.
 ...
PMID:Oblique incidence of semi-guided planar waves on slab waveguide steps: effects of rounded edges. 3011 38