Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: KEGG:D02011 (FAD)
 5,530 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Intracranial controlled release polymers may improve drug administration to the brain, where therapy is frequently limited due to the low permeability of brain capillaries to therapeutic agents. On the basis of drug transport and elimination rates, we proposed that high molecular weight, water-soluble molecules would be retained in the brain space following release from an intracranial implant. To test this hypothesis, solid particles of different molecular weight fractions of fluorescein isothiocyanate labeled dextran (FITC-dextran; 4 x 10(3) Da (4 kDa) < weight-averaged molecular weight (Mw) < 150 kDa) or fluorescein were uniformly dispersed in matrices of a polyanhydride copolymer synthesized from a fatty acid dimer and sebacic acid in a 50:50 ratio, P(FAD:SA). When incubated in buffered saline, FITC-dextran fractions of 70 kDa Mw were released from the polymer within 48 h; 4 kDa Mw FITC-dextran and fluorescein were released more slowly. Following implantation of P(FAD:SA) matrices containing either 70 kDa Mw FITC-dextran, 4 kDa Mw FITC-dextran, or fluorescein into the brains of normal rats, fluorescent tracers were continuously released into the brain tissue for 30 days. Tracer concentrations within the brain were significantly higher for large molecular weight tracers (70 kDa Mw FITC-dextran >> 4 kDa Mw FITC-dextran > fluorescein). The rate of elimination, kapp, of each tracer from the brain was determined by comparing experimental data with a model describing tracer diffusion/elimination in the brain extracellular space; kapp decreased with increasing molecular weight (fluorescein > 4 kDa Mw FITC-dextran > 70 kDa Mw FITC-dextran).
 ...
PMID:Dextran retention in the rat brain following release from a polymer implant. 128 18

Studies investigating the erosion mechanism of the newly developed poly (fatty acid dimer: sebacic acid) polyanhydride (p:[FAD:SA]) are described. The overall erosion of different monomer compositions of p(FAD:SA) copolymers was examined to determine whether and to what extent copolymer properties affected polymer erosion. Increasing the hydrophobic monomer (FAD) content up to 50 wt% in the copolymer resulted in longer erosion, whereas further increases up to 70 wt% decreased the erosion period. Polymer crystallinity depended on copolymer FAD content. Copolymer degradation was studied by examining anhydride bond hydrolysis using infrared spectroscopy. Much faster hydrolysis was found in p(FAD:SA) 70:30 compared with more crystalline copolymers of higher SA content. Light microscopy indicates the presence of an erosion zone, a distinct area where mass loss occurs. This erosion zone moves from the outside toward the interior of the polymer matrix. It plays an important role in erosion because any water or monomer must diffuse through this eroded layer.
 ...
PMID:Erosion of a new family of biodegradable polyanhydrides. 787 86

A new method to prepare polyanhydride microspheres capable of near-constant sustained release of low molecular weight, water-soluble molecules is presented. The polyanhydrides used were poly(fatty acid dimer) (PFAD), poly(sebacic acid) (PSA), and their copolymers [P(FAD-SA)]. Acid orange 63 (AO), acid red 8 (AR), and p-nitroaniline, were used as model release molecules. P(FAD-SA) microspheres containing the molecules with or without gelatin were prepared by a modified solvent evaporation method using a double emulsion. The microspheres were spherical with diameters of 50-125 microns and encapsulated more than 85% of the molecule, irrespective of the compound used. Near-zero-order degradation kinetics were observed for 5 days as judged by sebacic acid (SA) release. Microsphere degradation was pH sensitive, being enhanced at high pH, and became more stable in acidic conditions, irrespective of the incorporation of gelatin in the matrix. For the gelatin-free microspheres, a close correlation of SA release and AO release was observed (2% loading), suggesting a release mechanism that was controlled dominantly by degradation. However, the incorporation of gelatin into the microsphere significantly extended the periods of molecule release from P(FAD-SA) microspheres, although the degradation profile of the microspheres themselves was quite similar to that of gelatin-free microspheres. It is possible that an interaction between FAD monomers and gelatin molecules causes continued release, even after the polymer matrix completely degrades (even after complete degradation, FAD monomers remain because of their poor water solubility). Thermal analysis of polyanhydride microspheres at different degradation stages demonstrated that a crystalline structure was formed between gelatin and the FAD monomers produced with microsphere degradation.(ABSTRACT TRUNCATED AT 250 WORDS)
 ...
PMID:Polyanhydride microspheres that display near-constant release of water-soluble model drug compounds. 846 12

A method to provide near-constant sustained release of high molecular weight, water-soluble proteins from polyanhydride microspheres is described. The polyanhydrides used were poly(fatty acid dimer) (PFAD), poly(sebacic acid) (PSA), and their copolymers [P(FAD-SA)]. P(FAD-SA) microspheres containing proteins of different molecular sizes--lysozyme, trypsin, heparinase, ovalbumin, albumin, and immunoglobulin--were prepared by a solvent evaporation method using a double emulsion. The microspheres containing proteins were spherical, with diameters of 50-125 microns, and encapsulated more than 80% of the protein, irrespective of the protein used. Enzymatic activity studies showed that encapsulation of enzymes inside polyanhydride microspheres can protect them from activity loss. When not placed inside polyanhydride microspheres, trypsin lost 80% of its activity in solution at 37 degrees C at pH 7.4 in 12 hr, whereas inside the polyanhydride microspheres the activity loss was less than 10% under these conditions. About 47% of the enzymatic activity of heparinase encapsulated in the microspheres was lost at 37 degrees C in 24 hr, while in solution it lost over 90% of its activity. The protein-loaded microspheres displayed near-zero-order erosion kinetics over 5 days as judged by the release of sebacic acid (SA) from the microspheres. The microspheres degraded to form SA and FAD monomers. All proteins were released at a near-constant rate without any large initial burst, irrespective of polymer molecular weight and protein loading. The period of protein release was longer than that of SA and continued protein release was observed even after the microsphere matrix had completely degraded. Differential scanning calorimetric studies demonstrated an interaction between protein and the FAD monomers produced with microsphere degradation. It is likely that the protein interaction with FAD monomers permits formation of water-insoluble protein aggregates which slowly dissolve and diffuse out of the matrix, leading to delayed protein release. For trypsin-loaded microspheres, trypsin lost 40% of its activity during microsphere preparation. Activity studies demonstrated that the sonication process was primarily responsible for activity loss. A reduction in the period of ultrasound exposure decreased the loss of protein activity to around 20%.
 ...
PMID:Controlled delivery systems for proteins using polyanhydride microspheres. 848 30

Various butorphanol-loaded microparticles have been prepared with a biodegradable copolymer P(FAD-SA) of erucic acid dimer (FAD) and sebacic acid (SA) and a copolymer P(CPP-SA) of carboxyphenoxypropane (CPP) and SA using a melt compounding and milling method. Drug release was measured in vitro following incubation of drug-loaded microparticles in water for injection at 37 degrees C. It was found that butorphanol was released in a sustained manner, yielding a cumulative drug release of about 100% over a period of 48 hr. Also, drug release was affected by drug loading and the size of the microparticles; however, it was not significantly influenced by the copolymer composition. Scanning electron microscopic (SEM) results showed that most of the particles were irregular in shape with uneven surfaces. The molecular weights of the copolymers were not changed after this fabrication process. In addition, 20% butorphanol-encapsulated microspheres were prepared with copolymer P(FAD-SA) by spray-drying. The SEM micrograph shows that the particle sizes of the microspheres ranged from 2 to 10 microns, and the external surfaces appear smooth. Moreover, rapid drug release was observed for these microspheres, with more than 92% of the encapsulated drug released within the first 2 hr.
 ...
PMID:Sustained-release butorphanol microparticles. 1090 May 39