Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: KEGG:D01931 (TiO2)
 11,320 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The osseointegration of oral implants is related to the early interactions between osteoblastic cells and titanium surfaces. The behaviour of osteoblastic MC3T3-E1 cells was compared on four different titanium surfaces: mirror-polished (Smooth-Ti), alumina grit-blasted (Alumina-Ti) or biphasic calcium phosphate ceramic grit-blasted (BCP-Ti) and a commercially available implant surface (SLA). Scanning electron microscopy and profilometry showed distinct microtopographies. The BCP-Ti group had higher average surface roughness (Ra=2.5 microm) than the other grit-blasted groups. Hydrophilicity and surfaces energies were determined on the different substrates by dynamic contact angle measurements. The most hydrophilic surface was the Alumina-Ti discs, while SLA was the most hydrophobic. The titanium surfaces were all oxidized as TiO2 and polluted by carbon contaminants, as determined by X-ray photoelectron spectroscopy. Alumina-Ti samples also exhibited aluminium peaks as a result of the blasting. The BCP-Ti discs contained traces of calcium and phosphorus. MC3T3-E1 cells attached, spread and proliferated on the substrates. For both the SLA and BCP-Ti groups, the entire surface was covered with a layer of osteoblastic cells after 2 days. At high magnification, the cells exhibited cytoplasmic extensions and filopodia. Compared with plastic, cell viability was similar with the Smooth-Ti, slightly lower with the Alumina-Ti and superior with the SLA and BCP-Ti groups. Alkaline phosphatase activity increased with the culture time whatever the substrate. This study shows that BCP-blasting produces rough titanium implants without surface contaminants.
 ...
PMID:Osteoblastic cell behaviour on different titanium implant surfaces. 1822 85

Hierarchically porous oxide materials have immense potential for applications in catalysis, separation, and energy devices, but the synthesis of these materials is hampered by the need to use multiple templates and the associated complicated steps and uncontrollable mixing behavior. Here we report a simple one-pot strategy for the synthesis of inorganic oxide materials with multiscale porosity. The inorganic precursor and block copolymer are coassembled into an ordered mesostructure (microphase separation), while the in situ-polymerized organic precursor forms organic-rich macrodomains (macrophase separation) around which the mesostructure grows. Calcination generates hierarchical meso/macroporous SiO2 and TiO2 with three-dimensionally interconnected pore networks. The continuous 3D macrostructures were clearly visualized by nanoscale X-ray computed tomography. The resulting TiO2 was used as the anode in a lithium ion battery and showed excellent rate capability compared with mesoporous TiO2. This work is of particular importance because it (i) expands the base of BCP self-assembly from mesostructures to complex porous structures, (ii) shows that the interplay of micro- and macrophase separation can be fully exploited for the design of hierarchically porous inorganic materials, and therefore (iii) provides strategies for researchers in materials science and polymer science.
...
PMID:Direct access to hierarchically porous inorganic oxide materials with three-dimensionally interconnected networks. 2533 37

PDMS-PU (polydimethylsiloxane-polyurethane) sponge decorated with In(OH)3 (indium hydroxide) and BCP (bromocresol purple) particles is shown to be a room-temperature ammonia sensor with high sensitivity and excellent reproducibility; it can accomplish real-time detection and monitoring of ammonia in the surrounding environment. The superhydrophobic and yellowish In(OH)3-BCP-TiO2-based ammonia-responsive (IBT-AR) sponge changes to a purple superhydrophilic one when exposed to ammonia. Notably, after reacting with ammonia, the sponge can recover its original wettability and color after heating in air. The wettability, color and absorption signal of IBT-AR sponge have been measured for sensing ammonia using the water contact angle, macroscopic observation and UV-vis absorption spectrometry, respectively. The minimum ammonia concentrations that can be detected by the sponge wettability, color and absorption signal are 0.5%, 1.4 ppm and 50 ppb, respectively. This kind of sponge with smart wettability and color is a promising new ammonia detector.
 ...
PMID:A dual ammonia-responsive sponge sensor: preparation, transition mechanism and sensitivity. 2989 62