Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.3.4.6 (urease)
 7,490 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

From poly(vinyl alcohol) precursors, various reactive carriers for the immobilization of enzymes were synthesized. As insoluble starting polymers, the following products were used: poly(vinyl alcohol), gels crosslinked with terephthalaldehyde, hydrolyzed beads of crosslinked poly(vinyl acetate), poly(vinyl acetate-co- ethylene) tubes coated with poly(vinyl alcohol), and poly(vinyl alcohol)-containing synthetic pulp. Reactive groups introduced into these carriers or methods for their activation included the diazonium- and isothiocyanato group, and the glutardialdehyde-, BrCN, 2, 4, 6-trichloro-s-triazien, and p-benzoquinone methods. Furthermore, SH-specific reactive groups such as N-substituted maleimide groups or activated mixed disulfides with 2-thiopyridyl groups could be introduced into PVA-polymers. Enzymes like hydrolases (e.g. papain, trypsin, chymotrypsin, urease), oxidoreductases (e.g. glucose oxydase, catalase, glucose-6-phosphate dehydrogenase) as well as the example of transferase hexokinase coimmobilized with glucose-6-phosphate dehydrogenase, were immobilized by reactive poly(vinyl alcohol) carriers. The properties of the immobilized enzymes were investigated.
 ...
PMID:Some new reactive polymers for the immobilization of enzymes. 741 95

A membrane reactor-separator, in which an anion-exchange membrane and a urease-immobilized poly(vinyl alcohol) (PVA) membrane were clamped together to separate the feed solution and the stripping solution of a dialysis cell, was constructed. The urea in the feed solution passed through the anion-exchange membrane, water film, and then was hydrolyzed to ammonium carbamate in the urease-immobilized PVA membrane. The experimental results showed that no ammonium ion was found in the feed solution under either phosphate or citrate buffer systems at 0.05-0.2 mol dm-3 and pH 6-9, and various initial concentrations of urea in the feed solution (20-200 mmol dm-3). This indicates that the water film between two membranes allows the carbamate ions to decompose into ammonium and carbonate ions completely before entering the anion-exchange membrane. The device therefore can be used for the removal of urea from feed solution, while preventing the backflow of ammonium ions from the stripping solution or water film into feed solution. It has significant potential in the development of a wearable or portable artificial kidney. The properties of the urease-immobilized PVA membrane were examined. A kinetic model describing the transport-reaction behavior of urea in the membrane reactor-separator was developed, and the optimum values of the reactor parameters were obtained.
 ...
PMID:Transport and hydrolysis of urea in a reactor-separator combining an anion-exchange membrane and immobilized urease. 776 2

A novel urea biosensor based on immobilised recombinant urease as sensitive element and ion sensitive field effect transistor as transducer was developed. Recombinant urease from E. coli with an increased Km was photoimmobilised in PVA/SbQ (poly(vinyl alcohol) containing styrylpyridinium) membrane and has demonstrated quite good performance as biosensitive element. Enzymatic field effect transistors based on such a bioselective element were studied in model buffer solutions. This biosensor demonstrated an extended dynamic range up to 80 mM, a quite good reproducibility (standard deviation of the sensor responses was approximately 2.5%, n= 20 for urea concentration 10 mM) and a high stability. Such characteristics fit with the analytical requirements needed for urea control in plasma and liquids used during renal dialysis.
 ...
PMID:A novel urea sensitive biosensor with extended dynamic range based on recombinant urease and ISFETs. 1456 13

The microenvironments of the sol-gel-derived urease biosensors in terms of elemental ratio, surface morphology, specific surface area and pore size were investigated to characterize the physicochemical properties of poly(vinyl alcohol) (PVA)-modified sol-gel materials. X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and surface area analyzer were used to identify the surface species, topography and pore distribution of the organically doped sol-gel network. XPS results showed that stoichiometric ratios of oxygen-to-silicon in sol-gel materials were in the range 2.08-2.11. The sol-gel materials were partially dried and negatively charged, which retained 6-8% water content to maintain urease activity. The surface morphology of the sol-gel altered obviously when macromolecules were encapsulated, resulting in the increase in surface mean roughness from 0.207 to 2.636 nm. The specific surface area decreased dramatically after the immobilization of biomolecules and organic additives, which clearly depicts that PVA and urease were co-encapsulated into the sol-gel network. However, there still exist enough pore volumes for analytes to mass transport. The apparent Michaelis-Menten constant value (Km) of the encapsulated urease was similar to that in solution and the overall catalytic efficiency in PVA-doped sol-gel-derived glasses only decreased by a factor of 3.2 relative to the value in solution. In addition, the analytical performance of the entrapped urease in PVA-doped sol-gel materials was examined by determining the Cu(II) concentration in aqueous solution. The analytical range of Cu(II) was in the range 2x10(-6) to 2x10(-2) M with a detection limit of 1.5 microg L(-1). Results obtained in this study demonstrate a strategy for maintaining urease activity for biomedical and environmental applications.
 ...
PMID:Preparation and characterization of urease-encapsulated biosensors in poly(vinyl alcohol)-modified silica sol-gel materials. 1747 71

Polyvinylalcohol was activated with 2-fluoro-1-methylpyridiniumtoluene-4-sulphonate and urease (EC.3.5.1.5) was covalently linked to the activated matrix. PVA-urease was then immobilized on the surface of a pH glass electrode with gelatine gel and it was cross-linked using glutaraldehyde. This potentiometric membrane electrode provides a linearity to urea in the 8.910(-5) to 1.110(-3) M concentration range, but by changing the buffer concentration can be studied in the range of 10(-4) to 10(-2) M urea concentration. Reproducibility experiments (n:20) were carried out with the urease enzyme electrode and with photometric methods for pooled serum sample. Average values for the two methods were 5.96 and 5.86 mM, variation coefficients were 2.5 and 3.5% respectively.
 ...
PMID:Preparation of a potentiometric immobilized urease electrode and urea determination in serum. 1896 9

We show a simple strategy to obtain an efficient enzymatic bioelectrochemical device, in which urease was immobilized on electroactive nanostructured membranes (ENMs) made with polyaniline and silver nanoparticles (AgNP) stabilized in polyvinyl alcohol (PAni/PVA-AgNP). Fabrication of the modified electrodes comprised the chemical deposition of polyaniline followed by drop-coating of PVA-AgNP and urease, resulting in a final ITO/PAni/PVA-AgNP/urease electrode configuration. For comparison, the electrochemical performance of ITO/PAni/urease electrodes (without Ag nanoparticles) was also studied. The performance of the modified electrodes toward urea hydrolysis was investigated via amperometric measurements, revealing a fast increase in cathodic current with a well-defined peak upon addition of urea to the electrolytic solution. The cathodic currents for the ITO/PAni/PVA-AgNP/urease electrodes were significantly higher than for the ITO/PAni/urease electrodes. The friendly environment provided by the ITO/PAni/PVA-AgNP electrode to the immobilized enzyme promoted efficient catalytic conversion of urea into ammonium and bicarbonate ions. Using the Michaelis-Menten kinetics equation, a K(M)(app) of 2.7 mmol L(-1) was obtained, indicating that the electrode architecture employed may be advantageous for fabrication of enzymatic devices with improved biocatalytic properties.
 ...
PMID:Enzyme immobilization on Ag nanoparticles/polyaniline nanocomposites. 1942 91