Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.2.1.1 (ACS)
 78,556 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Understanding the nature of the interface between nanofibers and polymer resins in composite materials is challenging because of the complexity of interactions that may occur between fibers and between the matrix and the fibers. The ability to select the most efficient amount of reinforcement for stress transfer, making a saving on both cost and weight, is also a key part of composite design. The use of Raman spectroscopy to investigate micromechanical properties of laminated bacterial cellulose (BC)/poly(l-lactic) acid (PLLA) resin composites is reported for the first time as a means for understanding the fundamental stress-transfer processes in these composites, but also as a tool to select appropriate processing and volume fraction of the reinforcing fibers. Two forms of BC networks are investigated, namely, one cultured for 3 days and another for 6 days. The mechanical properties of the latter were found to be higher than the former in terms of Young's modulus, stress at failure, and work of fracture. However, their specific Young's moduli (divided by density) were found to be similar. Young's modulus and stress at failure of transparent predominantly amorphous PLLA films were found to increase by 100 and 315%, respectively, for an 18% volume fraction of BC fibers. BC networks cultured for 3 days were shown to exhibit enhanced interaction with PLLA because of their higher total surface area compared, as measured by nitrogen adsorption, to the material cultured for 6 days. This enhanced interaction is confirmed by using the Raman spectroscopic approach, whereby larger band shift rates, of a peak initially located at 1095 cm(-1), with respect to both strain and stress, are observed, which is a quantitative measure of enhanced stress transfer. Thermal analysis (differential scanning calorimetry) and electron microscopy imaging (scanning electron microscopy) of the samples also confirms the enhanced coupling between the resin and the BC networks cultured for 3 days, compared to those cultured for 6 days. These results are shown to have implications for the use of BC networks for composite reinforcement, whereby less material can be used for the same specific mechanical properties. The technique also gives opportunities to study the interfaces in these composite materials in detail.
ACS Appl Mater Interfaces 2010 Jan
PMID:Optimization of the mechanical performance of bacterial cellulose/poly(L-lactic) acid composites. 2035 52

Binderless hierarchically porous monoliths have been produced from silicalite-1 and ZSM-5 zeolite powders by a rapid and facile powder processing method where the zeolite powders are assembled in a graphite die and subjected simultaneously to a compressive pressure and a pulsed current. Pulsed current processing (PCP) or, as it is commonly called, spark plasma sintering, enables rapid thermal processing of zeolite powder assemblies with heating and cooling rates at 100 degrees C/minute or more, which results in the formation of strong powder bodies without any addition of secondary binders. Nitrogen adsorption measurements show that it is possible to form strong zeolite monoliths by PCP that maintain between 85 and 95% of the surface area of the as-received silicalite-1 and ZSM-5 powders. Line-broadening analysis of X-ray powder diffraction data by the Rietveld method and high-resolution electron microscopy showed that the formation of strong interparticle bonds is associated with a local amorphization reaction at the interfacial contact points between the zeolite particles. The PCP-treated binderless ZSM-5 monoliths display a high selectivity in xylene isomer separation.
ACS Appl Mater Interfaces 2010 Mar
PMID:Strong hierarchically porous monoliths by pulsed current processing of zeolite powder assemblies. 2035 74

Poly(1-(2-methacryloyloxy)ethyl-3-butylimidazolium bis(trifluoromethanesulfonyl)imide) (PMIS) and poly(n-hexyl methacrylate) (PHMA) brushes were prepared on initiator-immobilized silicon wafers by surface-initiated atom transfer radical polymerization. The macroscopic frictional properties of the brushes were determined using a ball-on-flat type tribotester under reciprocating motion in a dry nitrogen atmosphere, water, methanol, and 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI). When the PMIS and PHMA brushes were exposed to EMImTFSI, the friction coefficient of the former was lower than that of the latter. It is thought that the high affinity of the PMIS brush to EMImTFSI led to a reduction in the interaction between the brush and the friction probe, which resulted in a low friction coefficient. The friction force of the PMIS brush in EMImTFSI was proportional to a normal load in the range of 0.2-0.98 N. The friction coefficient gradually decreased to 0.01 with an increase in the sliding velocity from 1 x 10(-4) to 1 x 10(-1) m s(-1). The friction coefficient of the PMIS brush exhibited low magnitude until 800 friction cycles in the dry nitrogen atmosphere, whereas the PHMA brush was abraded away within 150 friction cycles. The XPS spectra of the worn surfaces on the PMIS brush suggested that the brush was gradually abraded by friction.
ACS Appl Mater Interfaces 2010 Apr
PMID:Macroscopic frictional properties of poly(1-(2-methacryloyloxy)ethyl-3-butyl imidazolium bis(trifluoromethanesulfonyl)-imide) brush surfaces in an ionic liquid. 2036 30

Chemical doping with foreign atoms is an effective method to intrinsically modify the properties of host materials. Among them, nitrogen doping plays a critical role in regulating the electronic properties of carbon materials. Recently, graphene, as a true two-dimensional carbon material, has shown fascinating applications in bioelectronics and biosensors. In this paper, we report a facile strategy to prepare N-doped graphene by using nitrogen plasma treatment of graphene synthesized via a chemical method. Meanwhile, a possible schematic diagram has been proposed to detail the structure of N-doped graphene. By controlling the exposure time, the N percentage in host graphene can be regulated, ranging from 0.11 to 1.35%. Moreover, the as-prepared N-doped graphene has displayed high electrocatalytic activity for reduction of hydrogen peroxide and fast direct electron transfer kinetics for glucose oxidase. The N-doped graphene has further been used for glucose biosensing with concentrations as low as 0.01 mM in the presence of interferences.
ACS Nano 2010 Apr 27
PMID:Nitrogen-doped graphene and its application in electrochemical biosensing. 2037 45

The biosynthesis of isopentenyl diphosphate (IPP) from either the mevalonate (MVA) or the 1-deoxy-d-xylulose 5-phosphate (DXP) pathway provides the key metabolite for primary and secondary isoprenoid biosynthesis. Isoprenoid metabolism plays crucial roles in membrane stability, steroid biosynthesis, vitamin production, protein localization, defense and communication, photoprotection, sugar transport, and glycoprotein biosynthesis. Recently, an alternative branch of the MVA pathway was discovered in the archaeon Methanocaldococcus jannaschii involving a small molecule kinase, isopentenyl phosphate kinase (IPK). IPK belongs to the amino acid kinase (AAK) superfamily. In vitro, IPK phosphorylates isopentenyl monophosphate (IP) in an ATP and Mg(2+)-dependent reaction producing IPP. Here, we describe crystal structures of IPK from M. jannaschii refined to nominal resolutions of 2.0-2.8 A. Notably, an active site histidine residue (His60) forms a hydrogen bond with the terminal phosphate of both substrate and product. This His residue serves as a marker for a subset of the AAK family that catalyzes phosphorylation of phosphate or phosphonate functional groups; the larger family includes carboxyl-directed kinases, which lack this active site residue. Using steady-state kinetic analysis of H60A, H60N, and H60Q mutants, the protonated form of the Nepsilon(2) nitrogen of His60 was shown to be essential for catalysis, most likely through hydrogen bond stabilization of the transition state accompanying transphosphorylation. Moreover, the structures served as the starting point for the engineering of IPK mutants capable of the chemoenzymatic synthesis of longer chain isoprenoid diphosphates from monophosphate precursors.
ACS Chem Biol 2010 Jun 18
PMID:Mutation of archaeal isopentenyl phosphate kinase highlights mechanism and guides phosphorylation of additional isoprenoid monophosphates. 2039 12

Polyethylene terephthalate (PET) plates have been exposed to different nitrogen containing plasmas with the purpose of incorporating nitrogen functional groups on its surface. Results with a dielectric barrier discharge (DBD) at atmospheric pressure and a microwave discharge (MW) at reduced pressure and those using an atom source working under ultrahigh vacuum conditions have been compared for N(2) and mixtures Ar + NH(3) as plasma gases. The functional groups have been monitored by X-ray Photoemission Spectroscopy (XPS). Nondestructive oxygen and carbon depth profiles for the plasma treated and one month aged samples have been determined by means of the nondestructive Tougaard's method of XPS background analysis. The surface topography of the treated samples has been examined by Atomic Force Microscopy (AFM), while the surface tension has been determined by measuring the static contact angles of water and iodomethane. It has been found that the DBD with a mixture of Ar+NH(3) is the most efficient treatment for nitrogen and amine group functionalization as determined by derivatization by reaction with chlorobenzaldehyde. It is also realized that the nitrogen functional groups do not contribute significantly to the observed increase in surface tension of plasma treated PET.
ACS Appl Mater Interfaces 2010 Apr
PMID:Surface functionalization, oxygen depth profiles, and wetting behavior of PET treated with different nitrogen plasmas. 2042 18

A central composite rotatable design (CCRD) method was used to investigate the performance of the accelerated thermomolecular adhesion process (ATmaP), at different operating conditions. ATmaP is a modified flame-treatment process that features the injection of a coupling agent into the flame to impart a tailored molecular surface chemistry on the work piece. In this study, the surface properties of treated polypropylene were evaluated using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). All samples showed a significant increase in the relative concentration of oxygen (up to 12.2%) and nitrogen (up to 2.4%) at the surface in comparison with the untreated sample (0.7% oxygen and no detectable nitrogen) as measured by XPS. ToF-SIMS and principal components analysis (PCA) showed that ATmaP induced multiple reactions at the polypropylene surface such as chain scission, oxidation, nitration, condensation, and molecular loss, as indicated by changes in the relative intensities of the hydrocarbon (C(3)H(7)(+), C(3)H(5)(+), C(4)H(7)(+), and C(5)H(9)(+)), nitrogen and oxygen-containing secondary ions (C(2)H(3)O(+), C(3)H(8)N(+), C(2)H(5)NO(+), C(3)H(6)NO(+), and C(3)H(7)NO(+)). The increase in relative intensity of the nitrogen oxide ions (C(2)H(5)NO(+) and C(3)H(7)NO(+)) correlates with the process of incorporating oxides of nitrogen into the surface as a result of the injection of the ATmaP coupling agent.
ACS Appl Mater Interfaces 2010 May
PMID:Exploring molecular changes at the surface of polypropylene after accelerated thermomolecular adhesion treatments. 2043 36

Reinforcement efficiency of different types of carbon nanotubes (CNT) have been compared in polyacrylonitrile (PAN) films at nanotube loadings of 5, 10, and 20 wt %. The films are characterized for mechanical, dynamic-mechanical, and thermomechanical properties, electrical conductivity, as well as structural analysis. PAN/CNT composite films exhibit electrical conductivities up to 5500 S/m. Based on X-ray diffraction, PAN crystallinity was shown to increase with the presence of CNT. PAN-CNT interactions in the various composites were compared using conventional activation energy analysis. The strongest physical interaction between PAN and CNT was found in samples containing single-wall carbon nanotubes (SWNT). CNT surface area was also measured using nitrogen gas adsorption and correlated with PAN-CNT composite film mechanical properties, in an effort to better understand PAN-CNT interactions for different CNT morphologies. Solvent behavior of various composite films has also been investigated. The presence of CNT was found to improve PAN solvent resistance.
ACS Appl Mater Interfaces 2010 May
PMID:Polyacrylonitrile/carbon nanotube composite films. 2044 Nov 81

Nitrogen doping of TiO(2) films (N:TiO(2)) has been shown to improve the visible-light sensitivity of TiO(2), thereby increasing the performance of both photovoltaic and photocatalytic devices. Inductively coupled rf plasmas containing a wide range of nitrogen precursors were used to create nitrogen-doped TiO(2) films. These treatments resulted in anatase-phased materials with as high as 34% nitrogen content. As monitored with high-resolution X-ray photoelectron spectroscopy spectra, the nitrogen binding environments within the films were controlled by varying the plasma processing conditions. XPS peak assignments for multiple N 1s binding environments were made based on high resolution Ti 2p and O 1s XPS spectra, Fourier transform infrared spectroscopy (FTIR) data, and literature N 1s XPS peak assignments. The N:TiO(2) films produced via plasma treatments displayed colors ranging from gray to brown to blue to black, paralleling the N/Ti ratios of the films. Three possible mechanisms to explain the color changes in these materials are presented.
ACS Appl Mater Interfaces 2010 Jun
PMID:Controlled nitrogen doping and film colorimetrics in porous TiO2 materials using plasma processing. 2052 31

We report on studies of electronic properties and scanning tunneling microscopy (STM) of the most common configurations of nitrogen- or boron-doped graphene and carbon nanotubes using density functional theory. Charge transfer, shift of the Fermi level, and localized electronic states are analyzed as a function of the doping configurations and concentrations. The theoretical STM images show common fingerprints for the same doping type for graphene, and metallic or semiconducting nanotubes. In particular, nitrogen is not imaged in contrast to boron. STM patterns are mainly shaped by local density of states of the carbon atoms close to the defect. STM images are not strongly dependent on the bias voltage when scanning the defect directly. However, the scanning of the defect-free side of the tube displays a perturbation compared to the pristine tube depending on the applied bias.
ACS Nano 2010 Jul 27
PMID:Scanning tunneling microscopy simulations of nitrogen- and boron-doped graphene and single-walled carbon nanotubes. 2055 93


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>