Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.2.1.1 (ACS)
 78,556 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Carbon nitride materials have extraordinary potential in various applications, including catalysts, filled-particles, and superhard materials. Carbon nitride nanoclusters have been prepared under mild solvothermal conditions by a reaction between 1,3,5-trichlotriazine and sodium azide in toluene. The bulk material formed has a C(3)N(4) composition and consists of spheres with diameters ranging from approximately 1 nm to 4 mum. Nanometer-sized clusters of C(3)N(4) stoichiometry have been isolated on surfaces by sublimation or simple physicochemical methods. The clusters have then been characterized by atomic force microscopy and X-ray photoelectron spectroscopy. The laser desorption ionization mass spectra show peaks assignable to the C(12)N(16), C(21)N(28), and C(33)N(44) molecules which could correspond to cage structures with 4, 7, and 11 units of the C(3)N(4) subunit, respectively. The structure and stability of these new nitrogen-rich carbon nitride nanocages has been investigated using density functional theory calculations.
ACS Nano 2009 Nov 24
PMID:Azafullerene-like nanosized clusters. 1986 Mar 86

We report the synthesis of novel diphenylalanine/cobalt(II,III) oxide (Co(3)O(4)) composite nanowires by peptide self-assembly. Peptide nanowires were prepared by treating amorphous diphenylalanine film with aniline vapor at an elevated temperature. They were hybridized with Co(3)O(4) nanocrystals through the reduction of cobalt ions in an aqueous solution using sodium borohydride (NaBH(4)) without any complex processes such as heat treatment. The formation of peptide/Co(3)O(4) composite nanowires was characterized using multiple tools, such as electron microscopies and elemental analysis, and their potential application as a negative electrode for Li-ion batteries was explored by constructing Swagelok-type cells with hybrid nanowires as a working electrode and examining their charge/discharge behavior. The present study provides a useful approach for the synthesis of functional metal oxide nanomaterials by demonstrating the feasibility of peptide/Co(3)O(4) hybrid nanowires as an energy storage material.
ACS Nano 2010 Jan 26
PMID:Synthesis of diphenylalanine/cobalt oxide hybrid nanowires and their application to energy storage. 2000 Aug 41

Whole cantaloupes either not inoculated or inoculated with Salmonella Poona were submerged in water, 180 ppm of chlorine, acidified calcium sulfate (ACS: 1.2% Safe(2)O-ACS50), 1,000 ppm of acidified sodium chlorite (ASC), 80 ppm of peroxyacetic acid (PAA), and a combination of ACS and PAA for 10 min. Although only ASC and the combination of ACS and PAA significantly reduced the aerobic plate count of samples taken from the surface of whole cantaloupe (compared with samples taken from cantaloupe submerged in water only), all treatments reduced yeast and mold counts on the whole cantaloupe. However, none of the treatments of whole cantaloupes consistently reduced yeast and mold counts for the samples of fresh-cut cantaloupes. The aerobic plate counts for fresh-cut cantaloupe were reduced by 1 to 2 log CFU/g by sanitization of whole fruit with ASC, ACS, and the combination of ACS and PAA. The low bacterial population on the fresh-cut fruit was maintained during 14 days of storage at 4 degrees C. All treatments had a limited effect on the population of Salmonella, achieving no more than a 1.5-log reduction of the pathogen inoculated on the surface of the whole cantaloupes. Salmonella was nondetectable via direct plating (with a detection limit of 0.4 log CFU/g) in fresh-cut cantaloupes prepared from whole cantaloupes treated with any of the sanitizers. However, after enrichment, Salmonella often was detectable. Color, texture, soluble solids, pH, ascorbic acid, and drip loss of cut cantaloupes were not consistently affected by any of the whole-fruit treatments. Overall, treatments of whole cantaloupe with ASC, ACS, and the combination of ACS and PAA at the concentrations tested permitted a significant reduction in Salmonella and native microflora of whole and cut fruit; however, Salmonella still could be found in cut cantaloupes from all treatments.
 ...
PMID:Use of chemical sanitizers to reduce microbial populations and maintain quality of whole and fresh-cut cantaloupe. 2000 25

Several strategies aimed at sorting single-walled carbon nanotubes (SWNT) by diameter and/or electronic structure have been developed in recent years. A nondestructive sorting method was recently proposed in which nanotube bundles are dispersed in water-surfactant solutions and submitted to ultracentrifugation in a density gradient. By this method, SWNTs of different diameters are distributed according to their densities along the centrifuge tube. A mixture of two anionic amphiphiles, namely sodium dodecylsulfate (SDS) and sodium cholate (SC), presented the best performance in discriminating nanotubes by diameter. We present molecular dynamics studies of the water-surfactant-SWNT system. The simulations revealed one aspect of the discriminating power of surfactants: they can actually be attracted toward the interior of the nanotube cage. The binding energies of SDS and SC on the outer nanotube surface are very similar and depend weakly on diameter. The binding inside the tubes, on the contrary, is strongly diameter dependent: SDS fits best inside tubes with diameters ranging from 8 to 9 A, while SC is best accommodated in larger tubes, with diameters in the range 10.5-12 A. The dynamics at room temperature showed that, as the amphiphile moves to the hollow cage, water molecules are dragged together, thereby promoting the nanotube filling. The resulting densities of filled SWNT are in agreement with measured densities.
ACS Nano 2010 Feb 23
PMID:Role of surfactants in carbon nanotubes density gradient separation. 2005 84

Gold nanoparticles (AuNP) were prepared by the homogeneous mixing of continuous flows of an aqueous tetrachloroauric acid solution and a sodium borohydride solution applying a microstructured static mixer. The online characterization and screening of this fast process ( approximately 2 s) was enabled by coupling a micromixer operating in continuous-flow mode with a conventional in-house small angle X-ray scattering (SAXS) setup. This online characterization technique enables the time-resolved investigation of the growth process of the nanoparticles from an average radius of ca. 0.8 nm to about 2 nm. To the best of our knowledge, this is the first demonstration of a continuous-flow SAXS setup for time-resolved studies of nanoparticle formation mechanisms that does not require the use of synchrotron facilities. In combination with X-ray absorption near edge structure microscopy, scanning electron microscopy, and UV-vis spectroscopy the obtained data allow the deduction of a two-step mechanism of gold nanoparticle formation. The first step is a rapid conversion of the ionic gold precursor into metallic gold nuclei, followed by particle growth via coalescence of smaller entities. Consequently it could be shown that the studied synthesis serves as a model system for growth driven only by coalescence processes.
ACS Nano 2010 Feb 23
PMID:Nucleation and growth of gold nanoparticles studied via in situ small angle X-ray scattering at millisecond time resolution. 2008 2

We propose a new material for high power and high density supercapacitors with excellent cycle stability. Graphite oxide (PSS-GO) intercalated with poly(sodium 4-styrensulfonate) showed high performance of electric double layer capacitance (EDLC) compared to that of the pristine graphite oxide. Specific capacitance of the PSS-GO reached 190 F/g, and the energy density was much improved to 38 Wh/kg with a power density of 61 W/kg. Cycle test showed that the specific capacitance decreased by only 12% after 14860 cycles, providing excellent cyclic stability. The high EDLC performance of PSS-GO composite was attributed to the wide interlayer distance and simple pore structures accommodating fast ion kinetics.
ACS Nano 2010 Feb 23
PMID:Enhanced electric double layer capacitance of graphite oxide intercalated by poly(sodium 4-styrensulfonate) with high cycle stability. 2009 69

Facile chemical approaches for the controllable synthesis of CuSe, CuInSe2 nanowire, and CuInSe2/CuInS2 core/shell nanocable bundles were developed. Hexagonal CuSe nanowire bundles with lengths up to hundreds of micrometers, consisting of many aligned nanowires with a diameter of about 10-15 nm, were prepared by reacting cubic Cu(2-x)Se nanowire bundles with a sodium citrate solution at room temperature. The CuSe nanowire bundles were then used as self-sacrificial templates for making bundles of tetragonal chalcopyrite CuInSe2 nanowires by reacting with InCl3 via a solvothermal process. Furthermore, bundles of CuInSe2/CuInS2 core/shell nanocables were obtained by adding sulfur to the reaction system, and the shell thickness of the polycrystalline CuInS2 in the nanocables increased with increasing S/Se molar ratios. It was found that the small radius of copper ions allows their fast outward diffusion from the interior to the surface of nanowires to react with sulfur atoms/anions and indium ions to form a CuInS2 shell. Enhanced optical absorption in the vis-NIR region of CuInSe2/CuInS2 core/shell nanocable bundles is demonstrated, which is considered beneficial for applications in optoelectronic devices and solar energy conversion.
ACS Nano 2010 Apr 27
PMID:Large-scale synthesis and phase transformation of CuSe, CuInSe2, and CuInSe2/CuInS2 core/shell nanowire bundles. 2021 Mar 50

A simple method for preparing solvent-resistant nanofibers with a thermal-sensitive surface has been developed by the combined technology of reversible addition-fragmentation chain-transfer (RAFT) polymerization, atom transfer radical polymerization (ATRP), electrospinning, and "click chemistry". Initially, well-defined block copolymers of 4-vinylbenzyl chloride (VBC) and glycidyl methacrylate (GMA) (PVBC-b-PGMA) were prepared via RAFT polymerization. Electrospinning of PVBC-b-PGMA from a solution in tetrahydrofuran gave rise to fibers with diameters in the range of 0.4-1.5 microm. Exposure to a solution of sodium azide (NaN(3)) not only affords nanofibers with azido groups on the surface but also leads to a cross-linking structure in the nanofibers. One more step of "click chemistry" between the PVBC-b-PGMA nanofibers with azido groups on the surface (PVBC-b-PGMA(-N3)) and alkyne-terminated polymers of N-isopropylacrylamide (NIPAM) (PNIPAM(AT)), which were prepared by ATRP, allows the preparation of a PVBC-b-PGMA nanofiber with thermal-sensitive PNIPAM brushes on the surface (PVBC-b-PGMA-g-PNIPAM). PVBC-b-PGMA-g-PNIPAM nanofibers exhibit a good resistance to solvents and thermal-responsive character to the environment, having a hydrophobic surface at 45 degrees C (water contact angle approximately 140 degrees) and having a hydrophilic surface at 20 degrees C (water contact angle approximately 30 degrees).
ACS Appl Mater Interfaces 2009 Feb
PMID:Smart nanofibers from combined living radical polymerization, "click chemistry", and electrospinning. 2035 8

The use of nanobubbles, the common surfactant sodium dodecyl sulfate (SDS), and nanobubbles in combination with SDS as cleaning agents to remove lysozyme from the solid-liquid interface has been investigated using a quartz crystal microbalance on both hydrophobic and hydrophilic surfaces. On the hydrophobic surface, significant amounts of protein remained on the surface after 10 cycles of nanobubble treatment for 10 s periods in phosphate buffer. The cleaning efficiency of SDS was far superior and was shown to remove approximately 90% of the protein. The use of nanobubbles in combination with SDS failed to improve the cleaning efficiency further. On the other hand, lysozyme on the hydrophilic surface cannot be removed effectively by either 10 cycles of cleaning with nanobubbles or 10 cycles of cleaning with SDS. Nevertheless, the protein can be removed completely after 6 cycles of cleaning with nanobubbles in combination with SDS.
ACS Appl Mater Interfaces 2009 Feb
PMID:Improved cleaning of hydrophilic protein-coated surfaces using the combination of Nanobubbles and SDS. 2035 40

Seeding polymer substrates for the attachment and growth of metallic contacts is an important problem in modern microcircuit fabrication. A new method to effect such polymer metallization is described in which the polymer is first treated with vapor of zirconium or titanium tetra-tert-butoxide and then thermalyzed to give several monolayers of zirconium or titanium oxides that are attached to the polymer surfaces. The thickness of this layer can be controlled by the vapor exposure time. The thin oxide layers withstand removal by strenuous flexing of the polymers, and they absorb copper sulfate from an aqueous solution. Upon simple treatment with dialkylaminoborane or sodium borohydride, the polymer is metallized with copper. The tetra-tert-butoxides can be deposited through a mask, and patterned metallization of the polymers is easily accomplished.
ACS Appl Mater Interfaces 2009 Oct
PMID:A nanoscale metal alkoxide/oxide adhesion layer enables spatially controlled metallization of polymer surfaces. 2035 44


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>