Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.2.1.1 (ACS)
 78,556 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The polyaniline (PANI) base was ball-milled with silver nitrate in the solid state. Samples were prepared at various mole ratios of silver nitrate to PANI constitutional units ranging from 0 to 1.5 for three processing times, 0, 5, and 10 min. The emeraldine form of PANI was oxidized to pernigraniline, and the silver nitrate was reduced to metallic silver. Nitric acid is a byproduct, which may protonate the residual emeraldine and pernigraniline. The changes occurring in the structure of PANI are discussed on the basis of Fourier transform IR and Raman spectroscopies. Raman spectra revealed the formation of pernigraniline salt. The reaction between the two nonconducting components, emeraldine base and silver nitrate, produced a mixture of two conducting components, emeraldine or pernigraniline nitrate and metallic silver. The accompanying conductivity changes were determined. The increase in the conductivity of the original base, 10(-9) S cm(-1), up to 10(-2) S cm(-1) was found to depend on the mole ratio of silver nitrate to PANI base and on the processing time of the components in the ball mill.
ACS Appl Mater Interfaces 2009 Sep
PMID:Solid-state reduction of silver nitrate with polyaniline base leading to conducting materials. 2035 13

Composite materials made up from a pyridinium polymer matrix and silver bromide nanoparticles embedded therein feature excellent antimicrobial properties. Most probably, the antimicrobial activity is related to the membrane-disrupting effect of both the polymer matrix and Ag(+) ions; both may work synergistically. One of the most important applications of antimicrobial materials would be their use as surface coatings for percutaneous (skin-penetrating) catheters, such as central venous catheters (CVCs). These are commonly used in critical care, and serious complications due to bacterial infection occur frequently. This study aimed at examining the possible effects of a highly antimicrobial pyridinium polymer/AgBr composite on the blood coagulation system, i.e., (i) on the coagulation cascade, leading to the formation of thrombin and a fibrin cross-linked network, and (ii) on blood platelets. Evidently, pyridinium/AgBr composites could not qualify as coatings for CVCs if they trigger blood coagulation. Using a highly antimicrobial composite of poly(4-vinylpyridine)-co-poly(4-vinyl-N-hexylpyridinium bromide) (NPVP) and AgBr nanoparticles as a thin adherent surface coating on Tygon elastomer tubes, it was found that contacting blood platelets rapidly acquire a highly activated state, after which they become substantially disrupted. This implies that NPVP/AgBr is by no means blood-compatible. This disqualifies the material for use as a CVC coating. This information, combined with earlier findings on the hemolytic effects (i.e., disruption of contacting red blood cells) of similar materials, implies that this class of antimicrobial materials affects not only bacteria but also mammalian cells. This would render them more useful outside the biomedical field.
ACS Appl Mater Interfaces 2009 Sep
PMID:Disruption and activation of blood platelets in contact with an antimicrobial composite coating consisting of a pyridinium polymer and AgBr nanoparticles. 2035 31

We have developed dual-tagging sensors, operating via both surface-enhanced Raman scattering (SERS) and metal-enhanced fluorescence (MEF), composed of silver-coated silica beads onto which were deposited SERS markers and dye-grafted polyelectrolytes, for multiplex immunoassays. Initially, a very simple electroless-plating method was applied to prepare Ag-coated silica beads. The Raman markers were then assembled onto the Ag-coated silica beads, after which they were brought to stabilization by the layer-by-layer deposition of anionic and cationic polyelectrolytes including a dye-grafted polyelectrolyte. In the final stage, the dual-tagging sensors were assembled onto them with specific antibodies (antihuman-IgG or antirabbit-IgG) to detect target antigens (human-IgG or rabbit-IgG). The MEF signal was used as an immediate indicator of molecular recognition, while the SERS signals were subsequently used as the signature of specific molecular interactions. For this reason, these materials should find wide application, especially in the areas of biological sensing and recognition that rely heavily on optical and spectroscopic properties.
ACS Appl Mater Interfaces 2009 Oct
PMID:Silver-coated silica beads applicable as core materials of dual-tagging sensors operating via SERS and MEF. 2035 51

Noble metals are interesting biomaterials for a number of reasons, e.g., their chemical inertness and relative mechanical softness, silver's long known antimicrobial properties, and the low allergenic response shown by gold. Although important for the final outcome of biomaterials, little is reported about early events between pure noble metals and blood. In this article, we used whole blood in the "slide chamber model" to study the activation of the immune complement activation, generation of thrombin/antithrombin (TAT) complexes, and platelet depletion from blood upon contact with silver (Ag), palladium (Pd), gold (Au), titanium (Ti), and Bactiguard, a commercial nanostructured biomaterial coating comprised of Ag, Pd, and Au. The results show the highest TAT generation and platelet depletion on Ti and Au and lower on Pd, Ag, and the Bactiguard coating. The immune complement factor 3 fragment (C3a) was generated by the surfaces in the following order: Ag > Au > Pd > Bactiguard > Ti. Quartz crystal microbalance adsorption studies with human fibrinogen displayed the highest deposition to Ag and the lowest onto the Bactiguard coating. The adsorbed amounts of fibrinogen did not correlate with thrombogenicity in terms of TAT formation and platelet surface accumulation in blood. The combined results suggest, hence, that noble metal chemistry has a different impact on the protein adsorption properties and general blood compatibility. The low thrombogenic response by the Bactiguard coating cannot be explained by any of the single noble metal properties but is likely a successful combination of the nanostructure, nanogalvanic effects, or combinatory chemical and physical materials properties.
ACS Appl Mater Interfaces 2009 May
PMID:Blood interactions with noble metals: coagulation and immune complement activation. 2035 91

Silver nanoparticles (Ag NPs) were chemically deposited on silicon nanowires (SiNWs), prepared using the vapor-liquid-solid (VLS) growth mechanism, using an in situ electroless metal deposition technique. The resulting SiNWs/Ag NPs composite interfaces showed large Raman scattering enhancement for rhodamine 6G (R6G) with a detection limit of 10(-14) M and an enhancement factor of 2.3 x 10(8). This large enhancement factor was attributed to the presence of "hot" spots on the SiNWs/Ag NPs substrate.
ACS Appl Mater Interfaces 2009 Jul
PMID:Silicon nanowires coated with silver nanostructures as ultrasensitive interfaces for surface-enhanced Raman spectroscopy. 2035 41

Reflective and surface conductive polyimide films were prepared by the incorporation of silver(I) acetate and trifluoroacetylacetone into a dimethylacetamide solution of the poly(amic acid) formed 3,3',4,4'-oxidiphthalic dianhydride (ODPA) and 4,4'-oxidianiline (4,4'-ODA). Thermal curing of (trifluoroacetylacetonato)silver(I)-poly(amic acid) films led to cycloimidization with concomitant silver(I) reduction, which yielded a reflective and conductive silver surface at selected silver concentrations if the film was cured to a final temperature of 300 degrees C for several hours. The metallized ODPA/4,4'-ODA films retain the essential mechanical properties of an undoped film and have good thermal stability, particularly under a nitrogen atmosphere. The bulk of the composite film was not electrically conductive. The use of (hexafluoroacetylacetonato)silver(I) and silver(I) tetrafluoroborate as sources of silver(I) with ODPA/4,4'-ODA yielded modestly reflective films that never developed conductivity. The silvered films prepared with (trifluoroacetylacetonato)silver(I) can be patterned using mask-etch techniques. Comparisons are made among four similar silver-polyimide systems, with the polyimides being ODPA/4,4'-ODA, BTDA/4,4'-ODA, BPDA/4,4'-ODA, and 6FDA/4-BDAF.
ACS Appl Mater Interfaces 2009 Jul
PMID:Single-stage synthesis and characterization of reflective and conductive silver-polyimide films prepared from silver(I) complexes with ODPA/4,4'-ODA. 2035 49

We report a method for the synthesis of antimicrobial coatings on medical instruments that combines the bacteriolytic activity of lysozyme and the biocidal properties of silver nanoparticles. Colloidal suspensions of lysozyme and silver nanoparticles were electrophoretically deposited onto the surface of stainless steel surgical blades and needles. Electrodeposited films firmly adhered to stainless steel surfaces even after extensive washing and retained the hydrolytic properties of lysozyme. The antimicrobial efficacy of coatings was tested by using blades and needles in an in vitro lytic assay designed to mimic the normal application of the instruments. Coated blades and needles were used to make incisions and punctures, respectively, into agarose infused with bacterial cells. Cell lysis was seen at the contact sites, demonstrating that antimicrobial activity is transferred into the media, as well as retained on the surface of the blades and needles. Blade coatings also exhibited antimicrobial activity against a range of bacterial species. In particular, coated blades demonstrated potent bactericidal activity, reducing cell viability by at least 3 log within 1.5 h for Klebsiella pneumoniae, Bacillus anthracis Sterne, and Bacillus subtilis and within 3 h for Staphylococcus aureus and Acinetobacter baylyi. The results confirmed that complex antimicrobial coatings can be created using facile methods for silver nanoparticle synthesis and electrodeposition.
ACS Appl Mater Interfaces 2009 Jul
PMID:Hybrid antimicrobial enzyme and silver nanoparticle coatings for medical instruments. 2035 60

A simple method that allows selective positioning of nanoparticles into mesoporous monolayer or multilayer thin films is presented. This technique applies UV lithography in order to bring about in situ light-induced reduction of silver in templated cavities of TiO2. The nanoparticle lithography presented here provides a novel approach to hierarchical lithography patterning for multifunctional devices.
ACS Appl Mater Interfaces 2009 Apr
PMID:Patterned production of silver-mesoporous titania nanocomposite thin films using lithography-assisted metal reduction. 2035 98

We report a one-pot synthesis of silver nanoparticle-polymer composites (Ag-PNCs) in water by a novel finding involving the polycondensation of methoxybenzyl chlorides (MeO-BzCl) directly on Ag nanoparticle surfaces at room temperature, leading to highly soluble antimicrobial nanocomposites. The composites, which are soluble in a range of organic solvents, precipitate in the reaction vessel, making their separation simple. Solutions of the composites can be casted directly on substrates or made into freestanding films. The material was found to be stable for nearly 2 years. A range of substrates have been shown to become antibacterial by direct application of this material. The experiments were conducted with Ag-PNC-loaded filter paper strips and glass substrates. The samples were found to be antimicrobial (against Escerichia coli and Aspergillus niger). The simple one-pot approach of this kind to make organic-soluble antibacterial coatings could have wide implications.
ACS Appl Mater Interfaces 2009 Nov
PMID:Organic-soluble antimicrobial silver nanoparticle-polymer composites in gram scale by one-pot synthesis. 2035 8

Silver galvanic displacement on silicon has been employed to produce large-area reproducible substrates, with morphology similar to that of the natural desert rose but on the micrometer scale. The process is based on an extremely simple wet chemistry approach using only AgF and KF, as silver and fluoride sources. A key element is the absence of HF in the deposition solution, which has been commonly used in previous silver galvanic displacement processes. The new process affords a higher degree of control in the redox reaction than those reported previously. The structures formed in this manner possess a large area-to-volume ratio with a high density of rough silver flakes uniformly distributed across the substrate. The silver morphology on the nanometer scale is shown to provide an excellent platform for surface-enhanced Raman spectroscopy (SERS), yielding detection levels for trans-1,2-bis(4-pyridyl)ethylene, 4-mercaptopyridine, and Rhodamine 6G in solution down to ppb, ppt, and ppq limits, respectively. The SERS reproducibility on the substrate was verified by monitoring the signal intensity variations across the sample. The simplicity of the substrate fabrication process, as well as the excellent uniformity, opens up opportunities for the quantitative and in-field chemical trace analysis using these substrates.
ACS Appl Mater Interfaces 2009 Nov
PMID:Silver nanodesert rose as a substrate for surface-enhanced Raman spectroscopy. 2035 26


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>