Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.2.1.1 (ACS)
 78,556 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Mesoporous silica nanoparticles functionalized by surface hyperbranching polymerization of poly(ethylene imine), PEI, were further modified by introducing both fluorescent and targeting moieties, with the aim of specifically targeting cancer cells. Owing to the high abundance of folate receptors in many cancer cells as compared to normal cells, folic acid was used as the targeting ligand. The internalization of the particles in cell lines expressing different levels of folate receptors was studied. Flow cytometry was used to quantify the mean number of nanoparticles internalized per cell. Five times more particles were internalized by cancer cells expressing folate receptors as compared to the normal cells expressing low levels of the receptor. Not only the number of nanoparticles internalized per cell, but also the fraction of cells that had internalized nanoparticles was higher. The total number of particles internalized by the cancer cells was, therefore, about an order of magnitude higher than the total number of particles internalized by normal cells, a difference high enough to be of significant biological importance. In addition, the biospecifically tagged hybrid PEI-silica particles were shown to be noncytotoxic and able to specifically target folate receptor-expressing cancer cells also under coculture conditions.
ACS Nano 2009 Jan 27
PMID:Targeting of porous hybrid silica nanoparticles to cancer cells. 1920 67

Tumor-specific gene delivery constitutes a primary challenge in nonviral mediated gene therapy. In this investigation, branched polyethylenimine (bPEI, 25 kDa) was modified by forming nanoconstructs with a natural polysaccharide, chondroitin sulfate (CS), to impart site-specific property. A library of CS-PEI (CP) nanoconstructs was fabricated by altering the content of CS and evaluated in terms of size, surface charge, morphology, pDNA loading efficiency, pDNA release assay, pDNA protection study, cytotoxicity, and transfection efficiency. In vitro transfection efficiency of CP nanoconstructs was examined in HEK293, HEK293T, HepG2, and HeLa cell lines, while their cytotoxicity was investigated in HepG2 and HeLa cells. DNase I protection assay showed that the plasmid was protected from degradation over a period of time. The CP nanoconstructs possess significantly lower toxicity and enhanced transfection efficiency compared to PEI (25 kDa) and commercial transfection reagents (i.e., superfect, fugene, and GenePORTER 2). Further, the CP nanoconstructs were also found to transfect cells in serum-containing medium. In vivo studies were carried out with pDNA loaded CP-3 nanoconstruct after intravenous (iv) injection in Ehrlich ascites tumor (EAT)-bearing mice. The outcome revealed higher concentration of CP-3 nanoconstruct in tumor mass. These findings demonstrate that CP nanoconstructs could be exploited as carriers for nanomedicine for efficient management of solid tumor.
ACS Nano 2009 Jun 23
PMID:Gene expression, biodistribution, and pharmacoscintigraphic evaluation of chondroitin sulfate-PEI nanoconstructs mediated tumor gene therapy. 1944 35

Gene therapy holds great promise for treating diseases ranging from inherited disorders to acquired conditions and cancers. Nonetheless, because a method of gene delivery that is both effective and safe has remained elusive, these successes were limited. Functional nanodiamonds (NDs) are rapidly emerging as promising carriers for next-generation therapeutics with demonstrated potential. Here we introduce NDs as vectors for in vitro gene delivery via surface-immobilization with 800 Da polyethyleneimine (PEI800) and covalent conjugation with amine groups. We designed PEI800-modified NDs exhibiting the high transfection efficiency of high molecular weight PEI (PEI25K), but without the high cytotoxicity inherent to PEI25K. Additionally, we demonstrated that the enhanced delivery properties were exclusively mediated by the hybrid ND-PEI800 material and not exhibited by any of the materials alone. This platform approach represents an efficient avenue toward gene delivery via DNA-functionalized NDs, and serves as a rapid, scalable, and broadly applicable gene therapy strategy.
ACS Nano 2009 Sep 22
PMID:Polymer-functionalized nanodiamond platforms as vehicles for gene delivery. 1971 52

The aim of this research was to explore the use of amine-containing polymeric and low-molar-mass organic protecting agents in the preparation of copper nanoparticles. Particles were synthesized using poly(ethylene imine) (PEI) or tetraethylenepentamine (TEPA) as protecting agents. The resulting particles were studied with UV-vis spectrometry, thermogravimetry, scanning electron microscopy, and transmission electron microscopy, wide-angle X-ray scattering with heating, X-ray photoelectron spectroscopy, and Auger electron spectroscopy. The average crystal sizes for the particles were at room temperature 8.5 and 19.4 nm for PEI and TEPA, respectively, and some surface oxidation was observed. The particles were sintered on paper, and the resistance and resistivity were measured. For Cu/PEI samples, the protecting agent was removed upon sintering at relatively low temperatures (between 150 and 200 degrees C). At this temperature range, particles exhibited a rapid increase in the crystal size. Sintered particles exhibited high conductivity, indicating that these kinds of materials might find use in paper-based printing.
ACS Appl Mater Interfaces 2009 Feb
PMID:Poly(ethylene imine) and tetraethylenepentamine as protecting agents for metallic copper nanoparticles. 2035 45

Monodisperse polymer-mediated platinum (Pt) nanoparticles (NPs) have been synthesized by photoreduction in the presence of poly(ethylenimine) (PEI), a hyperbranched polymer. The formation process of the Pt NPs is pursued by UV-vis spectroscopy, and the formation mechanism is discussed. The morphology and size of the Pt NPs were characterized by transmission electron microscopy (TEM). TEM imaging shows that the Pt NPs' average diameter is 2.88 +/- 0.53 nm. The PEI/Pt NPs were immobilized on glassy carbon electrodes, and the electrocatalytic activity of the catalysts was investigated by cyclic voltammetry. PEI/Pt NPs exhibit very high catalytic activity for a methanol oxidation reaction. PEI/Pt NPs on glassy carbon electrodes are robust, showing good tolerance to poisoning even after many cycles. The electrocatalytic activity of PEI/Pt NPs compares favorably with other polymer-mediated Pt NPs. The results indicate that PEI is an appropriate complexing reducing agent for the photochemical production of Pt NPs and a good capping agent, allowing immobilization of the NPs on the working electrode.
ACS Appl Mater Interfaces 2009 Oct
PMID:Synthesis and electrocatalytic activity of photoreduced platinum nanoparticles in a poly(ethylenimine) matrix. 2035 66

Chiral polyelectrolyte multilayers (PEMs) consisting of poly(l-lysine) (PLL), poly(N-(S)alkylated 4-vinylpyridinium iodide), or poly(ethyleneimine maltose) (PEI-m) as polycations and poly(styrenesulfonic acid) sodium salt (PSS) or poly(vinyl sulfate) as polyanions, as well as a nonchiral PEM composed of poly(ethyleneimine) (PEI) and PSS were deposited on silicon substrates and poly(tetrafluoroethylene) membranes using the layer-by-layer method. For these PEMs, enantiospecific interaction toward one enantiomer of either l/d-glutamic acid (l/d-GLU), l/d-tryptophan, or l/d-ascorbic acid (l/d-ASC), respectively, was studied under variation of the concentration, pH, and ionic strength. Both deposition and enantiospecific interaction were analyzed by attenuated total reflection Fourier transform infrared spectroscopy. Our results show a significant enantiospecific preference of d-GLU over l-GLU at PEMs containing PLL and of d-ASC over l-ASC at PEMs containing PEI-m. No such enantiospecific preference was found for nonchiral PEMs containing PEI. The enantiospecificity of PEMs of PLL/PSS toward l/d-GLU could be significantly influenced by the ionic strength and pH values, so that increasing attractive electrostatic interactions resulted in higher enantiospecificity.
ACS Appl Mater Interfaces 2009 Dec
PMID:In situ ATR-FTIR investigation on the preparation and enantiospecificity of chiral polyelectrolyte multilayers. 2035 70

Macro- and mesoporous hybrid materials have applications in the fields of drug delivery, catalysis, biosensing, and separations. The pore size requirements must be well-understood to maximize the performance (e.g., load capacity and accessibility) of such materials. Hybrid materials were prepared by coating five distinct macroporous commercial membranes with zirconium titanium oxide through sol-gel chemistry. Calcination of these templated materials produced oxide membranes which had a suite of macropore and mesopore architectures, pore volumes, and surface areas. These differences in physical properties were used to conduct a fundamental study on the relationship between the pore size and volume and the polymer incorporation. Metal oxide membranes were postsynthetically modified with poly(ethyleneimine) (PEI) ranging in molecular weight from 1300 to 1 000 000 Da (1.2-11 nm in hydrodynamic diameter). The incorporation of the polymer from a 9 wt % solution at pH 10 was highly dependent on the pore size and pore volume. As the surface area increased, loading capacity decreased, indicating that much of the increased internal surface, due to small pore diameters (< or = 8 nm), was inaccessible to the macromolecules. Exclusion of PEI from small mesopores was apparent even for the lowest molecular weight polymer. A high maximum loading of 1.25 mg m(-2) of 600 000-1 000 000 Da PEI was achieved in the metal oxide with the largest minimum mesopore diameter. Thus, mesopore diameter and pore volume must be considered when designing a mesoporous solid support.
ACS Appl Mater Interfaces 2009 Dec
PMID:Pore size and volume effects on the incorporation of polymer into macro- and mesoporous zirconium titanium oxide membranes. 2035 72

We report an approach to the functionalization of fibers and fiber-based materials that is based on the deposition of reactive azlactone-functionalized polymers and the "reactive" layer-by-layer assembly of azlactone-containing thin films. We demonstrate (i) that the azlactone-functionalized polymer poly(2-vinyl-4,4-dimethylazlactone) (PVDMA) can be used to modify the surfaces of a model protein-based fiber (horsehair) and cellulose-based materials (e.g., cotton and paper), and (ii) that fibers functionalized in this manner can be used to support the fabrication of covalently cross-linked and reactive polymer multilayers assembled using PVDMA and poly(ethyleneimine) (PEI). The growth, chemical reactivity, and uniformity of films deposited on these substrates were characterized using fluorescence microscopy, confocal microscopy, and scanning electron microscopy (SEM). In addition to the direct functionalization of fibers, we demonstrate that the residual azlactone functionality in PVDMA-treated or film-coated fibers can be exploited to chemically modify the surface chemistry and physicochemical properties of fiber-based materials postfabrication using amine functionalized molecules. For example, we demonstrate that this approach permits control over the surface properties of paper (e.g., absorption of water) by simple postfabrication treatment of film-coated paper with the hydrophobic amine n-decylamine. The azlactone functionality present in these materials provides a platform for the modification of polymer-treated and film-coated fibers with a broad range of other chemical and biological species (e.g., enzymes, peptides, catalysts, etc.). The results of this investigation thus provide a basis for the functionalization of fibers and fiber-based materials (e.g., textile fabrics or nonwoven mats) of potential utility in a broad range of consumer, industrial, and biomedical contexts.
ACS Appl Mater Interfaces 2010 May
PMID:Functionalization of fibers using azlactone-containing polymers: layer-by-layer fabrication of reactive thin films on the surfaces of hair and cellulose-based materials. 2040 71

Negatively charged colloidal poly(methyl methacrylate-co-butyl acrylate) (P(MMA-BA)) particles and positively charged dissolved poly(ethyleneimine) (PEI) were adsorbed onto a cement block using a layer-by-layer (LBL) assembly technique. The block was fashioned so as to have a cylindrical hole running from one face to another along the long axis of the rectangular block, and a fluid containing either of the two charged materials was pumped through the block. The result was a film tens of micrometers thick, and the pressure required to crack the cement block was measured after one end of the hole was sealed. Latex particles with a T(g) near the use temperature showed the maximum improvement in the cracking stress of the blocks. In a multilayer coating with identically sized particles, the cracking stress of the blocks increased to an improvement of 25% and then dropped off with increasing number of layers, even though the relationship between film thickness and the number of layers was linear. An improvement of about 30% in the cracking stress of the coated blocks was obtained when using multiple layers with different particle sizes. The effects of the number of layers and particle size on the cracking stress suggest that both the morphology and the thickness of the film play a role in performance. Tests done under confinement, e.g., with an external stress applied to the outside of the blocks, suggest that not only does a film-forming mechanism contribute to performance but that filling of microcracks in the rock may also play a role.
ACS Appl Mater Interfaces 2010 Apr
PMID:Strength improvement via coating of a cylindrical hole by layer-by-layer assembled polymer particles. 2042 42

Charge-reversal functional gold nanoparticles first prepared by layer-by-layer technique were employed to deliver small interfering RNA (siRNA) and plasmid DNA into cancer cells. Polyacrylamide gel electrophoresis measurements of siRNA confirmed the occurrence of the charge-reversal property of functional gold nanoparticles. The expression efficiency of enhanced green fluorescent protein (EGFP) was improved by adjuvant transfection with charge-reversal functional gold nanoparticles, which also had much lower toxicity to cell proliferation. Lamin A/C, an important nuclear envelope protein, was effectively silenced by lamin A/C-siRNA delivered by charge-reversal functional gold nanoparticles, whose knockdown efficiency was better than that of commercial Lipofectamine 2000. Confocal laser scanning microscopic images indicated that there was more cy5-siRNA distributed throughout the cytoplasm for cyanine 5-siRNA/polyethyleneimine/cis-aconitic anhydride-functionalized poly(allylamine)/ polyethyleneimine/11-mercaptoundecanoic acid-gold nanoparticle (cy5-siRNA/PEI/PAH-Cit/PEI/MUA-AuNP) complexes. These results demonstrate the feasibility of using charge-reversal functional gold nanoparticles as a means of improving the nucleic acid delivery efficiency.
ACS Nano 2010 Sep 28
PMID:Enhanced gene delivery and siRNA silencing by gold nanoparticles coated with charge-reversal polyelectrolyte. 2070 86


1 2 3 4 5 6 7 8 9 10 Next >>