Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.2.1.1 (ACS)
 78,556 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The early diagnosis of cancer is the critical element in successful treatment and long-term favorable patient prognoses. The high rate of mortality is mainly attributed to the tendency for late diagnoses as symptoms may not occur until the disease has metastasized, as well as the lack of effective systemic therapies. Late diagnosis is often associated with the lack of timely sensitive imaging modalities. The promise of nanotechnology is presently limited by the inability to simultaneously seek, treat, and image cancerous lesions. This study describes the design and synthesis of fluorescent calcium phosphosilicate nanocomposite particles (CPNPs) that can be systemically targeted to breast and pancreatic cancer lesions. The CPNPs are a approximately 20 nm diameter composite composed of an amorphous calcium phosphate matrix doped with silicate in which a near-infrared imaging agent, indocyanine green (ICG), is embedded. In the present studies, we describe and validate CPNP bioconjugation of human holotransferrin, anti-CD71 antibody, and short gastrin peptides via an avidin-biotin or a novel PEG-maleimide coupling strategy. The conjugation of biotinylated human holotransferrin (diferric transferrin) and biotinylated anti-CD71 antibody (anti-transferrin receptor antibody) to avidin-conjugated CPNPs (Avidin-CPNPs) permits targeting of transferrin receptors, which are highly expressed on breast cancer cells. Similarly, the conjugation of biotinylated pentagastrin to Avidin-CPNPs and decagastrin (gastrin-10) to PEG-CPNPs via PEG-maleimide coupling permits targeting of gastrin receptors, which are overexpressed in pancreatic cancer lesions. These bioconjugated CPNPs have the potential to perform as a theranostic modality, simultaneously enhancing drug delivery, targeting, and imaging of breast and pancreatic cancer tumors.
ACS Nano 2010 Mar 23
PMID:Bioconjugation of calcium phosphosilicate composite nanoparticles for selective targeting of human breast and pancreatic cancers in vivo. 2018 May 85

Escherichia coli phosphotransacetylase (Pta) catalyzes the reversible interconversion of acetyl-CoA and acetyl phosphate. Both compounds are critical in E. coli metabolism, and acetyl phosphate is also involved in the regulation of certain signal transduction pathways. Along with acetate kinase, Pta plays an important role in acetate production when E. coli grows on rich medium; alternatively, it is involved in acetate utilization at high acetate concentrations. E. coli Pta is composed of three different domains, but only the C-terminal one, called PTA_PTB, is specific for all Ptas. In the present work, the characterization of E. coli Pta and deletions from the N-terminal region were performed. E. coli Pta acetyl phosphate-forming and acetyl phosphate-consuming reactions display different maximum activities, and are differentially regulated by pyruvate and phosphoenolpyruvate. These compounds activate acetyl phosphate production, but inhibit acetyl-CoA production, thus playing a critical role in defining the rates of the two Pta reactions. The characterization of three truncated Ptas, which all display Pta activity, indicates that the substrate-binding site is located at the C-terminal PTA_PTB domain. However, the N-terminal P-loop NTPase domain is involved in expression of the maximal catalytic activity, stabilization of the hexameric native state, and Pta activity regulation by NADH, ATP, phosphoenolpyruvate, and pyruvate. The truncated protein Pta-F3 was able to complement the growth on acetate of an E. coli mutant defective in acetyl-CoA synthetase and Pta, indicating that, although not regulated by metabolites, the Pta C-terminal domain is active in vivo.
 ...
PMID:Functional dissection of Escherichia coli phosphotransacetylase structural domains and analysis of key compounds involved in activity regulation. 2023 19

Electrochemical (EC) quartz crystal microbalance with dissipation monitoring (ECQCM-D) is a new and powerful technique for the in situ study of adsorption phenomena, e.g., as a function of the potential of the substrate. When titanium (Ti) is employed as the substrate, its oxidation behavior needs to be taken into account. Ti is always covered with a native oxide layer that can grow by, e.g., thermal oxidation or under anodic polarization. For biomolecular adsorption studies on oxidized Ti under applied potential, a stable oxide layer is desired in order to be able to distinguish the adsorption phenomena and the oxide growth. Therefore, the oxidation of thermally evaporated Ti films was investigated in phosphate-buffered saline by means of ECQCM-D, using a specially designed EC flow cell. Upon stepping the potential applied to Ti up to 2.6 V vs standard hydrogen electrode (SHE), a fast increase of the mass was observed initially for each potential step, evolving slowly to an asymptotic mass change after several hours. The oxide layer thickness increased as a quasi-linear function of the oxidation potential for potentials up to 1.8 V vs SHE. The growth rate of the oxide was around 2.5-3 nm/V. No changes in the dissipation shift were observed for potentials up to 1.8 V vs SHE. The composition of the oxide layer was analyzed by X-ray photoelectron spectroscopy (XPS). It was mainly composed of TiO(2), with a small percentage of suboxides (TiO and Ti(2)O(3)) primarily at the inner metal/oxide interface. The amount of TiO(2) increased, and that of TiO and Ti(2)O(3) decreased, with increasing oxidation potential. For each oxidation potential, the calculated thickness obtained from ECQCM-D correlated well with the thickness obtained by XPS depth profiling. A procedure to prepare Ti samples with a stable oxide layer was successfully established for investigations on the influence of an electric field on the adsorption of biomolecules. As such, the effect of an applied potential on the adsorption behavior of lysozyme on oxidized Ti was investigated. It was observed that the adsorption of lysozyme on oxidized Ti was not influenced by the applied potential.
ACS Appl Mater Interfaces 2009 Feb
PMID:In situ control of the oxide layer on thermally evaporated titanium and lysozyme adsorption by means of electrochemical quartz crystal microbalance with dissipation. 2035 17

The use of nanobubbles, the common surfactant sodium dodecyl sulfate (SDS), and nanobubbles in combination with SDS as cleaning agents to remove lysozyme from the solid-liquid interface has been investigated using a quartz crystal microbalance on both hydrophobic and hydrophilic surfaces. On the hydrophobic surface, significant amounts of protein remained on the surface after 10 cycles of nanobubble treatment for 10 s periods in phosphate buffer. The cleaning efficiency of SDS was far superior and was shown to remove approximately 90% of the protein. The use of nanobubbles in combination with SDS failed to improve the cleaning efficiency further. On the other hand, lysozyme on the hydrophilic surface cannot be removed effectively by either 10 cycles of cleaning with nanobubbles or 10 cycles of cleaning with SDS. Nevertheless, the protein can be removed completely after 6 cycles of cleaning with nanobubbles in combination with SDS.
ACS Appl Mater Interfaces 2009 Feb
PMID:Improved cleaning of hydrophilic protein-coated surfaces using the combination of Nanobubbles and SDS. 2035 40

Sol-Gel chemistry has been used to prepare undoped and Mg-substituted biphasic calcium phosphate (BCP) ceramics composed of hydroxyapatite (HAp) and whitlockite (beta-TCP) phases. Different series of samples have been synthesized with different Mg-doping levels (from 0 to 5 atomic % of Ca atoms substituted) and different temperatures of calcination (from 500 to 1100 degrees C). All of the powdered samples were systematically treated by Rietveld refinement to extract the quantitative phase analysis and the structural and microstructural parameters, to locate the Mg crystallographic sites, and to refine the composition of the Mg-substituted phases. The temperature dependence of the weight amount ratio between HAp and beta-TCP is not monotonic because of the formation of minor phases such as Ca(2)P(2)O(7), CaO, MgO, and CaCO(3) and certainly an amorphous phase. On the other hand, the Mg stabilizing feature on the beta-TCP phase has been evidenced and explained. The mechanism of stabilization by small Mg(2+) is different from that by large Sr(2+). Nevertheless, in both cases, the beta-TCP stabilization is realized by an improvement of the environment of the Ca4 site unusually face-coordinated to a PO(4) tetrahedron. The substitution of a Mg atom in the Ca5 site allows considerable improvement of the bond valence sum of the unusual Ca4 polyhedron. The temperatures of calcination combined with the amount of Mg atoms introduced allow monitoring of the phase composition of the BCP ceramics as well as their microstructural properties. The bioactivity properties of the BCP samples are improved by the presence of Mg atoms in the structure of the beta-TCP phase. The mechanism of improvement is mainly attributed to an accelerated kinetic of precipitation of a calcium phosphate layer at the surface comprising HAp and/or beta-TCP phases.
ACS Appl Mater Interfaces 2009 Feb
PMID:Structural characterization and biological fluid interaction of Sol-Gel-derived Mg-substituted biphasic calcium phosphate ceramics. 2035 43

This paper describes the patterning of DNA arrays on plastic surfaces using an elastomeric, two-dimensional microcapillary system (muCS). Fluidic structures were realized through hot-embossing lithography using Versaflex CL30. Like elastomers based on poly(dimethylsiloxane), this thermoplastic block copolymer is able to seal a surface in a reversible manner, making it possible to confine DNA probes with a level of control that is unparalleled using standard microspotting techniques. We focus on muCSs that support arrays comprising up to 2 x 48 spots, each being 45 mum in diameter. Substrates were fabricated from two hard thermoplastic materials, poly(methylmethacrylate) and a polycyclic olefin (e.g., Zeonor 1060R), which were both activated with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide hydrochloride and N-hydroxysuccinimide to mediate covalent attachment of DNA molecules. The approach was exemplified by using 0.25-32 muM solutions of amino-modified oligonucleotides labeled with either Cy3 or Cy5 fluorescent dye in phosphate-buffered saline, allowing for a direct and sensitive characterization of the printed arrays. Solutions were incubated for durations of 1 to >48 h at 22, 30, and 40 degrees C to probe the conditions for obtaining uniform spots of high fluorescence intensity. The length (l) and depth (d) of microfluidic supply channels were both important with respect to depletion as well as evaporation of the solvent. While selective activation of the substrate proved helpful to limit unproductive loss of oligonucleotides along trajectories, incubation of solution in a humid environment was necessary to prevent uncontrolled drying of the liquid, keeping the immobilization process intact over extended periods of time. When combined, these strategies effectively promoted the formation of high-quality DNA arrays, making it possible to arrange multiple probes in parallel with a high degree of uniformity. Moreover, we show that resultant arrays are compatible with standard hybridization protocols, which allowed for reliable discrimination of individual strands when exposed to a specific ssDNA target molecule.
ACS Appl Mater Interfaces 2009 Jul
PMID:Microfluidic patterning of miniaturized DNA arrays on plastic substrates. 2035 40

A new process, laser-induced precursor formation and subsequent aging in a supersaturated calcium phosphate aqueous solution (CP solution), was applied for coating a hydroxyapatite (HAP) film on a polymeric material, ethylene-vinyl alcohol copolymer (EVOH). Laser irradiation onto EVOH immersed in the CP solution induced the formation of CP precursors, and an HAP film composed of a submicrometer-scale cavernous structure was formed by subsequent aging in a CP solution without laser irradiation. The resulting HAP film coated on EVOH demonstrated excellent structural and chemical uniformity and cell adhesion with the CHO-K1 and BHK-21 cells. This process provides a practical technique for coating HAP onto polymeric materials.
ACS Appl Mater Interfaces 2009 Jul
PMID:A new approach for hydroxyapatite coating on polymeric materials using laser-induced precursor formation and subsequent aging. 2035 55

Plasma-spray (PS) is a classical technique usually employed to cover orthopaedic titanium implant surfaces with hydroxyapatite (HA - Ca(10)(PO(4))(6)(OH)(2)). The objective of the current study is to investigate the structure and microstructure of HA plasma-spray 50 mum thick coating on titanium alloy (Ti-6Al-4 V) and residual stress due to processing in the substrate and in HA coating. The structure of the coatings was determined by high-energy synchrotron X-ray diffraction in energy dispersive (HESXRD), selected area electron diffraction (saed), Scanning Electron Microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). No impurity phases in the HA were identified by HESXRD to keep away from the decomposition of HA at high temperature. hcp phase of HA substrate was detected with slight amorphous background. FTIR spectrum of a HA powder shows a typical spectrum for HA material with the characteristic phosphate peaks for HA at wavenumbers of 1090, 1052, 963, 602, and 573 cm(-1) are present. The morphology of HA powder observed by SEM exhibits grains of ca. 0.1 mum well-adapted for cell proliferation. HA/Ti-6Al-4 V interface observed by cross-section scanning and transmission electron microscopy (TEM) presents microcracks. Residual stresses were analyzed by sin(2) Psi X-ray diffraction method on titanium substrates and HA coating. Although the Ti substrates are in a slightly tensile residual state, the coated ones show a compressive state.
ACS Appl Mater Interfaces 2010 Feb
PMID:Structural, microstructural, and residual stress investigations of plasma-sprayed hydroxyapatite on Ti-6Al-4 V. 2035 5

The biosynthesis of isopentenyl diphosphate (IPP) from either the mevalonate (MVA) or the 1-deoxy-d-xylulose 5-phosphate (DXP) pathway provides the key metabolite for primary and secondary isoprenoid biosynthesis. Isoprenoid metabolism plays crucial roles in membrane stability, steroid biosynthesis, vitamin production, protein localization, defense and communication, photoprotection, sugar transport, and glycoprotein biosynthesis. Recently, an alternative branch of the MVA pathway was discovered in the archaeon Methanocaldococcus jannaschii involving a small molecule kinase, isopentenyl phosphate kinase (IPK). IPK belongs to the amino acid kinase (AAK) superfamily. In vitro, IPK phosphorylates isopentenyl monophosphate (IP) in an ATP and Mg(2+)-dependent reaction producing IPP. Here, we describe crystal structures of IPK from M. jannaschii refined to nominal resolutions of 2.0-2.8 A. Notably, an active site histidine residue (His60) forms a hydrogen bond with the terminal phosphate of both substrate and product. This His residue serves as a marker for a subset of the AAK family that catalyzes phosphorylation of phosphate or phosphonate functional groups; the larger family includes carboxyl-directed kinases, which lack this active site residue. Using steady-state kinetic analysis of H60A, H60N, and H60Q mutants, the protonated form of the Nepsilon(2) nitrogen of His60 was shown to be essential for catalysis, most likely through hydrogen bond stabilization of the transition state accompanying transphosphorylation. Moreover, the structures served as the starting point for the engineering of IPK mutants capable of the chemoenzymatic synthesis of longer chain isoprenoid diphosphates from monophosphate precursors.
ACS Chem Biol 2010 Jun 18
PMID:Mutation of archaeal isopentenyl phosphate kinase highlights mechanism and guides phosphorylation of additional isoprenoid monophosphates. 2039 12

Isoprenoid compounds are ubiquitous in nature, participating in important biological phenomena such as signal transduction, aerobic cellular respiration, photosynthesis, insect communication, and many others. They are derived from the 5-carbon isoprenoid substrates isopentenyl diphosphate (IPP) and its isomer dimethylallyl diphosphate (DMAPP). In Archaea and Eukarya, these building blocks are synthesized via the mevalonate pathway. However, the genes required to convert mevalonate phosphate (MP) to IPP are missing in several species of Archaea. An enzyme with isopentenyl phosphate kinase (IPK) activity was recently discovered in Methanocaldococcus jannaschii (MJ), suggesting a departure from the classical sequence of converting MP to IPP. We have determined the high-resolution crystal structures of isopentenyl phosphate kinases in complex with both substrates and products from Thermoplasma acidophilum (THA), as well as the IPK from Methanothermobacter thermautotrophicus (MTH), by means of single-wavelength anomalous diffraction (SAD) and molecular replacement. A histidine residue (His50) in THA IPK makes a hydrogen bond with the terminal phosphates of IP and IPP, poising these molecules for phosphoryl transfer through an in-line geometry. Moreover, a lysine residue (Lys14) makes hydrogen bonds with nonbridging oxygen atoms at P(alpha) and P(gamma) and with the P(beta)-P(gamma) bridging oxygen atom in ATP. These interactions suggest a transition-state-stabilizing role for this residue. Lys14 is a part of a newly discovered "lysine triangle" catalytic motif in IPKs that also includes Lys5 and Lys205. Moreover, His50, Lys5, Lys14, and Lys205 are conserved in all IPKs and can therefore serve as fingerprints for identifying new homologues.
ACS Chem Biol 2010 May 21
PMID:X-ray structures of isopentenyl phosphate kinase. 2040 38


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>