Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.2.1.1 (ACS)
 78,556 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Fabrication of multilayer ultrathin composite films composed of nanosized titanium dioxide particles (P25, Degussa) and polyelectrolytes (PELs), such as poly(allyl amine hydrochloride) (PAH) and poly(styrene sulfonate sodium salt) (PSS), on glass substrates using the layer-by-layer (LbL) assembly technique and its potential application for the photodegradation of rhodamine B under ultraviolet (UV) irradiation has been reported. The polyelectrolytes and TiO(2) were deposited on glass substrates at pH 2.5 and the growth of the multilayers was studied using UV/vis spectrophotometer. Thickness measurements of the films showed a linear increase in film thickness with increase in number of bilayers. The surface microstructure of the thin films was characterized by field emission scanning electron microscope. The ability of the catalysts immobilized by this technique was compared with TiO(2) films prepared by drop casting and spin coating methods. Comparison has been made in terms of film stability and photodegradation of rhodamine B. Process variables such as the effect of surface area of the multilayers, number of bilayers, and initial dye concentration on photodegradation of rhodamine B were studied. Degradation efficiency increased with increase in number of catalysts (total surface area) and bilayers. Kinetics analysis indicated that the photodegradation rates follow first order kinetics. Under maximum loading of TiO(2), with five catalyst slides having 20 bilayers of polyelectrolyte/TiO(2) on each, 100 mL of 10 mg/L dye solution could be degraded completely in 4 h. The same slides could be reused with the same efficiency for several cycles. This study demonstrates that nanoparticles can be used in wastewater treatment using a simple immobilization technique. This makes the process an attractive option for scale up.
ACS Appl Mater Interfaces 2009 Nov
PMID:LbL fabricated poly(styrene sulfonate)/TiO(2) multilayer thin films for environmental applications. 2035 43

Chiral polyelectrolyte multilayers (PEMs) consisting of poly(l-lysine) (PLL), poly(N-(S)alkylated 4-vinylpyridinium iodide), or poly(ethyleneimine maltose) (PEI-m) as polycations and poly(styrenesulfonic acid) sodium salt (PSS) or poly(vinyl sulfate) as polyanions, as well as a nonchiral PEM composed of poly(ethyleneimine) (PEI) and PSS were deposited on silicon substrates and poly(tetrafluoroethylene) membranes using the layer-by-layer method. For these PEMs, enantiospecific interaction toward one enantiomer of either l/d-glutamic acid (l/d-GLU), l/d-tryptophan, or l/d-ascorbic acid (l/d-ASC), respectively, was studied under variation of the concentration, pH, and ionic strength. Both deposition and enantiospecific interaction were analyzed by attenuated total reflection Fourier transform infrared spectroscopy. Our results show a significant enantiospecific preference of d-GLU over l-GLU at PEMs containing PLL and of d-ASC over l-ASC at PEMs containing PEI-m. No such enantiospecific preference was found for nonchiral PEMs containing PEI. The enantiospecificity of PEMs of PLL/PSS toward l/d-GLU could be significantly influenced by the ionic strength and pH values, so that increasing attractive electrostatic interactions resulted in higher enantiospecificity.
ACS Appl Mater Interfaces 2009 Dec
PMID:In situ ATR-FTIR investigation on the preparation and enantiospecificity of chiral polyelectrolyte multilayers. 2035 70

Significant conductivity enhancement was observed on transparent and conductive poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films after a treatment with organic and inorganic acids, including acetic acid, propionic acid, butyric acid, oxalic acid, sulfurous acid, and hydrochloric acid. The conductivity could be enhanced from 0.2 to over 200 S cm(-1), that is, by a factor of more than 1000. The conductivity enhancement was dependent on the structure of the acids and the experimental conditions during the treatment, such as the acid concentration and the temperature. The optimal temperature was in the range of 120 to 160 degrees C. The resistance dropped rapidly when a PEDOT:PSS film was treated with acid solution of high concentration, whereas it gradually increased and then decreased when it was treated with an acid solution of low concentration. The mechanism for this conductivity enhancement was studied by various chemical and physical characterizations. The temperature dependence of conductivity indicates that the energy barrier for charge hopping among the PEDOT chains become lower in the highly conductive PEDOT:PSS film after the acid treatment. The ultraviolet-visible-near-infrared (UV-vis-NIR) absorption spectroscopy, the X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) indicate the loss of polystyrene sulfonic acid (PSSH) chains from the PEDOT:PSS film after the acid treatment, and the atomic force microscopy (AFM) suggest conformational change of the polymer chains. Therefore, the conductivity enhancement is attributed to the loss of PSSH chains from the PEDOT:PSS film and the conformational change of the PEDOT chains, which are induced by the acids.
ACS Appl Mater Interfaces 2010 Feb
PMID:Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) films through a treatment with organic carboxylic acids and inorganic acids. 2035 94

Electrostatic layer-by-layer assembly was the basis for the synthesis of multilayer nanorod/polymer composite films. Cationic and water-soluble CdSe nanorods (NRs) were synthesized and partnered with anionic polymers including poly(sodium 4-styrenesulfonate) (PSS) and two polythiophene-based photoactive polymers, sodium poly[2-(3-thienyl)-ethoxy-4-butylsulfonate (PTEBS) and poly[3-(potassium-6-hexanoate)thiophene-2,5-diyl] (P3KHT). Controlled multilayer growth is shown through UV-vis spectroscopy, cross-sectional SEM and surface analytical techniques including atomic force microscopy. The formation of an intimate nanorod/conducting polymer bulk heterojunction is confirmed through cross-sectional SEM, TEM, and scanning Auger analysis. A series of photovoltaic devices was fabricated on ITO electrodes using CdSe NRs in combination with PTEBS or P3KHT. A thorough device analysis showed that performance was limited by low short circuit current although charge transfer was confirmed in the ELBL nanocomposite thin films.
ACS Appl Mater Interfaces 2010 Jan
PMID:Electrostatic layer-by-layer assembly of CdSe nanorod/polymer nanocomposite thin films. 2035 38

We report the implementation of continuous, highly flexible, and transparent graphene films obtained by chemical vapor deposition (CVD) as transparent conductive electrodes (TCE) in organic photovoltaic cells. Graphene films were synthesized by CVD, transferred to transparent substrates, and evaluated in organic solar cell heterojunctions (TCE/poly-3,4-ethylenedioxythiophene:poly styrenesulfonate (PEDOT:PSS)/copper phthalocyanine/fullerene/bathocuproine/aluminum). Key to our success is the continuous nature of the CVD graphene films, which led to minimal surface roughness ( approximately 0.9 nm) and offered sheet resistance down to 230 Omega/sq (at 72% transparency), much lower than stacked graphene flakes at similar transparency. In addition, solar cells with CVD graphene and indium tin oxide (ITO) electrodes were fabricated side-by-side on flexible polyethylene terephthalate (PET) substrates and were confirmed to offer comparable performance, with power conversion efficiencies (eta) of 1.18 and 1.27%, respectively. Furthermore, CVD graphene solar cells demonstrated outstanding capability to operate under bending conditions up to 138 degrees , whereas the ITO-based devices displayed cracks and irreversible failure under bending of 60 degrees . Our work indicates the great potential of CVD graphene films for flexible photovoltaic applications.
ACS Nano 2010 May 25
PMID:Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics. 2039 55

We evaluate the potential in vitro cytotoxicity that may arise from metallic and magnetic DNA-templated nanostructures. By using a fluorescence-based assay, the viability of cells was examined after treatment with DNA-templated nanostructures. Inductively coupled plasma mass spectrometry (ICP-MS) was used to quantify the amount of nanoparticles internalized by the cells. Cell uptake of DNA-templated nanostructures was enhanced after encapsulating the nanostructure with layers of polyelectrolytes (PSS and PAH) and targeting ligands. Transmission electron microscope (TEM) images provided evidence that the nanostructures were localized in vesicles in the cytoplasm of the cells. The results from this study suggest that gold, iron oxide, and cobalt iron oxide DNA-templated nanostructures do not induce in vitro toxicity.
ACS Appl Mater Interfaces 2010 May
PMID:In vitro cytotoxic evaluation of metallic and magnetic DNA-templated nanostructures. 2042 63

We have developed polymer solar cells featuring a buffer layer of polythiophene (PT) sandwiched between the active layer and the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) layer. We attribute the improvement in power conversion efficiency of these polymer solar cells, relative to that of those based on poly(3-hexylthiophene):[6,6]-phenyl-C(61)-butyric acid methyl ester (P3HT:PCBM), to a reduction in the degree of carrier recombination at the junction interface. Because the conductivity and the energy level of PT can be tuned simply by applying a bias to it in an electrolytic solution, we also investigated the effect of the energy level on the devices' performances. The power conversion efficiency of a solar cell containing a PT buffer layer reached 4.18% under AM 1.5 G irradiation (100 mW/cm(2)).
ACS Appl Mater Interfaces 2010 May
PMID:A strategic buffer layer of polythiophene enhances the efficiency of bulk heterojunction solar cells. 2045 Jan 93

A stretchable e-textile was fabricated by simply soaking Spandex fabric in a conductive polymer aqueous dispersion, PEDOT-PSS. The resulting conductive fabric had an average conductivity of 0.1 S/cm. Subjecting the fabric to more than one soaking step increased the conductivity of the fabric up to ca. 2.0 S/cm resulting in a 33% faster switching speed. This simple methodology is not limited to Spandex (50% nylon/50% polyurethane). Several other fabric compositions were investigated for their conductivity via this process, including 100% cotton, 60% cotton/40% polyester, 95% cotton/5% Lycra, 60%polyester/40% rayon, 100% polyester, and 80% nylon/20% Spandex, listed in order of decreasing hydrophilicity. Those fabrics with higher water uptake resulted in higher conductivities upon soaking in PEDOT-PSS. Electrochromic polymers coated on the fabric could be switched between their different colored states, even upon stretching of the Spandex. SEM revealed that the electrochromic polymer coated on the substrate separated under stretching, uncovering the color of the base conducting fabric. It was found that the PEDOT-PSS was not a film on the Spandex but rather homogenously dispersed nanoparticles within the fabric matrix forming a percolated network.
ACS Appl Mater Interfaces 2010 Jun
PMID:Conductivity trends of PEDOT-PSS impregnated fabric and the effect of conductivity on electrochromic textile. 2048 42

The utilization of graphene oxide (GO) thin films as the hole transport and electron blocking layer in organic photovoltaics (OPVs) is demonstrated. The incorporation of GO deposited from neutral solutions between the photoactive poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) layer and the transparent and conducting indium tin oxide (ITO) leads to a decrease in recombination of electrons and holes and leakage currents. This results in a dramatic increase in the OPV efficiencies to values that are comparable to devices fabricated with PEDOT:PSS as the hole transport layer. Our results indicate that GO could be a simple solution-processable alternative to PEDOT:PSS as the effective hole transport and electron blocking layer in OPV and light-emitting diode devices.
ACS Nano 2010 Jun 22
PMID:Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells. 2048 12

Ion-sensitive properties of organic electrochemical transistors (OECT) based on Poly(3,4-ethylenedioxythiophene): poly(styrene sulfonic acid) (PEDOT:PSS) have been systematically studied for the first time. It has been found that the transfer curve (I(DS)-V(G)) of an OECT shifts to lower gate voltage horizontally with the increase of the concentration of cations, including H(+), K(+), Na(+), Ca(2+), and Al(3+), in the electrolyte. The gate electrode of the OECT plays an important role on its ion-sensitive properties. For devices with Ag/AgCl gate electrode, Nernstian relationships between the shift of the gate voltage and the concentrations of the cations have been obtained. For devices with metal gate electrodes, including Pt and Au, the ion sensitivity is higher than that given by the Nernst equation, which can be attributed to the interface between the metal gate and the electrolyte.
ACS Appl Mater Interfaces 2010 Jun
PMID:Ion-sensitive properties of organic electrochemical transistors. 2049 81


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>