Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:6.2.1.1 (ACS)
 78,556 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Local probe oxidation experiments by conductive AFM have been performed on a hexadecyl monolayer and a N-hydroxysuccinimide (NHS)-ester-functionalized undecyl (NHS-UA) monolayer assembled on hydrogen-terminated (i.e., unoxidized) silicon. The oxidation conditions for the mild oxidation of the top terminal groups of monolayers and the deep oxidation of the underlying silicon into silicon oxide were investigated. The results show that the bias threshold for the AFM tip-induced oxidation of the top groups of monolayers on oxide-free silicon can be reduced by 2 V for the methyl-terminated hexadecyl monolayer and even by 3.5 V for the active NHS-ester-terminated undecyl monolayer, in comparison to a methyl-terminated octadecyl trichlorosilane (OTS) monolayer on oxidized silicon. Upon such local mild oxidation, the active NHS ester group of the NHS-UA monolayer is selectively cleaved off to generate carboxyl-containing monolayer nanopatterns, opening further possibilities for subsequent patterned multifunctionalization.
ACS Nano 2009 Oct 27
PMID:Local probe oxidation of self-assembled monolayers on hydrogen-terminated silicon. 1975 33

We describe the development of a new type of high-resolution atomic force electrochemical microscopy (AFM-SECM), labeled Tarm (for tip-attached redox mediator)/AFM-SECM, where the redox mediator, a ferrocene (Fc), is tethered to the AFM-SECM probe via nanometer long, flexible polyethylene glycol (PEG) chains. It is demonstrated that the tip-attached ferrocene-labeled PEG chains effectively shuttle electrons between the tip and substrate, thus acting as molecular sensors probing the local electrochemical reactivity of a planar substrate. Moreover the Fc-PEGylated AFM-SECM probes can be used for tapping mode imaging, allowing simultaneous recording of electrochemical feedback current and of topography, with a vertical and a lateral resolution in the nanometer range. By imaging the naturally nanostructured surface of HOPG, we demonstrate that Tarm/AFM-SECM microscopy can be used to probe the reactivity of nanometer-sized active sites on surfaces. This new type of SECM microscopy, being, by design, free of the diffusional constraints of classical SECM, is expected to, in principle, enable functional imaging of redox nanosystems such as individual redox enzyme molecules.
ACS Nano 2009 Oct 27
PMID:Electrochemical atomic force microscopy using a tip-attached redox mediator for topographic and functional imaging of nanosystems. 1976 40

This paper discusses a method for the direct patterning of Au electrodes at nanoscale resolution using dip-pen nanolithography, with proof-of-concept demonstrated by creating single-walled carbon nanotube devices. This technique enables insight into three key concepts at the nanoscale: using dip-pen nanolithography as an alternative to electron-beam lithography for writing contacts to carbon nanotubes, understanding the integrity of contacts and devices patterned with this technique, and on a more fundamental level, providing a facile method to compare and understand electrical and Raman spectroscopy data from the same isolated carbon nanotube. Electrical contacts to individual and small bundle single-walled carbon nanotubes were masked by an alkylthiol that was deposited via dip-pen nanolithography on a thin film of Au evaporated onto spin-cast, nonpercolating, and highly isolated single-walled carbon nanotubes. A wet Au etching step was used to form the individual devices. The electrical characteristics for three different single-walled carbon nanotube devices are reported: semimetallic, semiconducting, and metallic. Raman analysis on representative devices corroborates the results from AFM imaging and electrical testing. This work demonstrates a technique for making electrical contact to nanostructures of interest and provides a platform for directly corroborating electrical and optical measurements. The merits of using dip-pen nanolithography include flexible device configuration (such as varying the channel length and the number, size, and orientation of contacts), targeted patterning of individual devices with imaging and writing conducted in the same instrument under ambient conditions, and negligible damage to single-walled carbon nanotubes during the fabrication process.
ACS Nano 2009 Nov 24
PMID:Dip-pen nanolithography of electrical contacts to single-walled carbon nanotubes. 1985 86

Solution phase triangular silver nanoplates (TSNP) with versatile tunability throughout the visible-NIR wavelengths are presented as highly sensitive localized surface plasmon refractive index sensors. A range of 20 TSNP solutions with edge lengths ranging from 11 to 200 nm and aspect ratios from 2 to 13 have been studied comprehensively using AFM, TEM, and UV-vis-NIR spectroscopy. Studies of the localized surface plasmon resonance (LSPR) peak's sensitivity to refractive index changes are performed using a simple sucrose concentration method whereby the surrounding refractive index can solely be changed without variation in any other parameter. The dependence of the TSNP localized surface plasmon resonance (LSPR) peak wavelength lambda(max) and its bulk refractive index sensitivity on the nanoplate's structure is determined. LSPR sensitivities are observed to increase linearly with lambda(max) up to 800 nm, with the values lying within the upper limit theoretically predicted for optimal sensitivity, notwithstanding any diminution due to ensemble averaging. A nonlinear increase in sensitivity is apparent at wavelengths within the NIR region with values reaching 1096 nm.RIU(-1) at lambda(max) 1093 nm. Theoretical studies performed using a simple aspect ratio dependent approximation method and discrete dipole approximation methods confirm the dependence of the LSPR bulk refractive index sensitivity upon the TSNP aspect ratio measured experimentally. These studies highlight the importance of this key parameter in acquiring such high sensitivities and promote these TSNP sols for sensing applications at appropriate wavelengths for biological samples.
ACS Nano 2010 Jan 26
PMID:Versatile solution phase triangular silver nanoplates for highly sensitive plasmon resonance sensing. 2003 Mar 62

An indirect method of protein patterning by using Ni(II) ion templates for immobilization via a specific metal-protein interaction is described. A nitrilotriacetic acid (NTA)-terminated self-assembled monolayer (SAM) allows oriented binding of histidine-tagged proteins via complexation with late first-row transition metal ions, such as Ni(II). Patterns of nickel(II) ions were prepared on NTA SAM-functionalized glass slides by microcontact printing (microCP) and dip-pen nanolithography (DPN) to obtain micrometer and submicrometer scale patterns. Consecutive dipping of the slides in 6His-protein solutions resulted in the formation of protein patterns, as was subsequently proven by AFM and confocal fluorescence microscopy. This indirect method prevents denaturation of fragile biomolecules caused by direct printing or writing of proteins. Moreover, it yields well-defined patterned monolayers of proteins and, in principle, is indifferent for biomolecules with a high molecular weight. This approach also enabled us to characterize the transfer of Ni(II) ions on fundamental parameters of DPN, such as writing speeds and tip-surface contact times, while writing with the smallest possible ink "molecules" (i.e., metal ions).
ACS Nano 2010 Feb 23
PMID:Protein immobilization on Ni(II) ion patterns prepared by microcontact printing and dip-pen nanolithography. 2010 81

We have demonstrated ultrasonic-assisted nanodimensional self-assembly of a conjugated polymer, P3HT, depending on its regioregularity, on solvent polarity, and on light irradiation. The resulting P3HT nanowires were investigated by means of AFM, UV-vis, and XRD and compared with films made by a conventional thermal annealing method. Obtained results indicate that ultrasonic agitation effectively generates P3HT nanowires, exemplifying a quick route to nanoscale morphology control which contributes to better organic photovoltaic cell performance.
ACS Nano 2010 Apr 27
PMID:Ultrasonic-assisted nanodimensional self-assembly of poly-3-hexylthiophene for organic photovoltaic cells. 2020 60

Polyindole (PIn) nanowires were formed on a lambda-DNA template by chemical oxidation of indole using aqueous FeCl3. The resulting nanowires are smooth, regular, conductive and had diameters in the range of 5-30 nm. These features allow them to be aligned by molecular combing and studied by scanned conductance microscopy, conductive AFM, and two-terminal I-V measurements. Using this combination of measurements, we find that the conductivity of PIn/DNA nanowires is between 2.5 and 40 S cm(-1) at room temperature, which is substantially greater than that in previous reports on the bulk polyindole conductivity (typically 10(-2)-10(-1) S cm(-1)). The conductance at zero bias shows an Arrhenius-type of dependence on temperature over the range of 233 to 373 K, and the values observed upon heating and cooling are repeatable within 5%; this behavior is consistent with a hopping mechanism of conductivity.
ACS Nano 2010 Apr 27
PMID:Preparation and characterization of conductive and photoluminescent DNA-templated polyindole nanowires. 2021 65

Current images of electromigration-induced common vapor-liquid-solid-grown GaN nanowires were obtained using a conductive atomic force microscope. Structural characterization indicated that these wurtzite (ZW) [0110] nanowires contained longitudinal zinc blende (ZB) defects as stacking faults. The current was attributed to tunneling current through the Schottky barrier between the AFM tip and a nanowire, which was dominated by the local nanowire surface work function. Due to the electromigration induced by large current densities around the defects, the axial splitting process of the nanowires was directly observed under continuous current scanning. The electromigration was likely enhanced by non-uniformly distributed electrostatic pressure around the axial ZW/ZB domain interfaces.
ACS Nano 2010 Apr 27
PMID:Current imaging and electromigration-induced splitting of GaN nanowires as revealed by conductive atomic force microscopy. 2023 13

Bacterial adhesion and spreading on biomaterials are considered key features of pathogenicity. Roughness and topography of the substrate have been reported to affect bacterial adhesion, but little is known about their effect on spreading. Submicron row and channel tuning with bacterial diameter (S2) were designed to test bacterial motility on these surfaces. Random nanometer-sized structures (S1) were used as controls. Optical microscopy and AFM were employed to detect biological and surface pattern details in the micro- and nanoscale, respectively. Results showed that motility strategies (flagella orientation, elongation, aggregation in rafts, formation of network structures, and development of a bacterial frontier) were affected by the presence of submicropatterns. Importantly, the rate of bacterial spreading on S2 was significantly reduced and influenced by the orientation of the submicropatterns. Consequently, submicroengineered substrates could be employed as a tool to downgrade bacterial colonization. Such patterns could impact on the design of proper engineered structures to control biofilm spreading on solid surfaces.
ACS Appl Mater Interfaces 2009 Jan
PMID:Submicron trenches reduce the Pseudomonas fluorescens colonization rate on solid surfaces. 2035 65

In this paper, we report the synthesis of a carboxyl-functionalized polypyrrole derivative, a poly(pyrrole-N-propanoic acid) (PPPA) film, by electrochemical polymerization, and the investigation of its basic properties via traditional characterization techniques such as confocal-Raman, FTIR, SEM, AFM, UV-vis, fluorescence microscopy, and contact-angle measurements. The experimental data show that the as-prepared PPPA film exhibits a hydrophilic nanoporous structure, abundant -COOH functional groups in the polymer backbone, and high fluorescent emission under laser excitation. On the basis of these unique properties, further experiments were conducted to demonstrate three potential applications of the PPPA film in chemical and biological sensors: a permeable and permselective membrane, a membrane with specific recognition sites for biomolecule immobilization, and a fluorescent conjugated polymer for amplification of fluorescence quenching. Specifically, the permeability and permselectivity of ion species through the PPPA film are detected by means of rotating-disk-electrode voltammetry; the specific recognition sites on the film surface are confirmed with protein immobilization, and the amplification of fluorescence quenching is measured by the addition of a quenching agent with fluorescence microscopy. The results are in good agreement with our expectations.
ACS Appl Mater Interfaces 2009 Jul
PMID:Functionalized polypyrrole film: synthesis, characterization, and potential applications in chemical and biological sensors. 2035 67


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>