Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:4.1.2.42 (DTA)
 1,693 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Presented is the case of a group exposure to lead occurring during the removal of lead-based paint from an older home. One patient had symptoms from the time of exposure to the time of presentation, when he was acutely ill and encephalopathic. The patient was treated successfully with an initial course of British Anti-Lewisite agent and calcium disodium versenate (CaEDTA) chelation, and two subsequent chelations with CaE-DTA alone. The other two patients had elevated lead levels but were asymptomatic. They were followed closely, and their lead levels steadily declined over several months. The evaluation and treatment of lead poisoning and excessive lead levels in adults is discussed, as is the need for physicians and the lay public to become aware of the hazards of renovating older homes.
 ...
PMID:Lead poisoning in adults from renovation of an older home. 210 95

The role of charged sites on the permeability characteristics of the pulmonary microvascular barrier were investigated using chronically instrumented unanesthetized sheep. In one series of experiments we studied the effects of the cationic amphiphile, dodecyl trimethylamine (DTA; 297 mol wt), and the anionic amphiphile, SDS (288 mol wt), on lung lymph flow rates (Ql), lung lymph to plasma protein ratios (L/P), pulmonary hemodynamics, and systemic hemodynamics. DTA significantly increased both Ql and L/P, whereas SDS had a more modest and transient effect on these variables. In a second series of experiments the polycations polybrene and poly-l-lysine were found to have very similar effects as those of DTA. In another series of experiments we tested the pretreatment inhibition potential of chlorpheniramine (an H1 receptor antagonist), dibutyryl-cyclic AMP (db-cAMP), and the calcium channel antagonists verapamil and nifedipine on polybrene-induced lung injury. We found that only verapamil and db-cAMP significantly attenuated the permeability effects of polybrene. We conclude that both cationic amphiphiles and polycations cause hemodynamic and permeability alterations in the pulmonary circulation of unanesthetized sheep. In addition, the permeability alterations induced by polybrene can be modulated by intracellular calcium and/or cAMP levels.
 ...
PMID:Effects of polycations on pulmonary vascular permeability in conscious sheep. 254 80

This study examined the thermal behavior of cast gypsum specimens, with and without additives, by means of simultaneous differential thermal analysis-thermogravimetry (DTA-TG) and dilatometry. Specimens were prepared from wet-calcined hemihydrates (Hydrocal and Densite). The additives studied were boric acid (H3BO3) and sodium chloride (NaCl), and these were added to the hemihydrate powders in concentrations of 2 wt% (in the case of H3BO3) and 0.5 wt% (in the case of NaCl). A large shrinkage was observed in the range of 300 to 500 degrees C, and this was greatly reduced when either H3BO3 or NaCl was present. The dehydration of gypsum (calcium sulfate dihydrate) was not completed until the initial stage of this large shrinkage was reached, but the phase transition of calcium sulfate anhydrite (III-CaSO4 to II-CaSO4) was the major cause for the large shrinkage. This phase transition occurred over a much wider temperature range than that suggested by the DTA-TG results. Dehydration conditions similar to those employed in wet calcination of gypsum appeared to be produced under atmospheric pressure when NaCl was present.
 ...
PMID:Thermal behavior of the gypsum binder in dental casting investments. 345 38

Decomposition of gypsum bonded investments was investigated by means of TG-DTA and X-ray diffraction. The decomposition began at about 900 degrees C and led to the formation of CaSiO3 as a major product and Ca2SiO4 as a minor one. CaO was not formed during the decomposition of any of the investments. The decomposition process followed Jander's equation, [1-(1-alpha)1/3]2 = kt, and the Ca2+ ion diffusion in CaSiO3 was concluded to be a rate-determining step.
 ...
PMID:Decomposition of gypsum bonded investments. 626 14

In this work we present the features and the properties of natural and synthetic apatites, which we use in an experimental study of various commercial products composed by calcium phosphate. After having considered the general concepts of biomaterials and biocompatibility, we describe non biological tests used for the characterization of these products. Biomaterials used in this study are: reabsorbable Dac Blu, non reabsorbable Dac Blu, non reabsorbable atomized Dac Blu, non reabsorbable thin Dac Blu, reabsorbable Biocoral 450, Calcitite 2040-12, Orthogel, Apagen, BTF 65, Calcitite 4060-2 Osprogel, Bio-oss, Biostite, Osprovit, Merck Hydroxiapatite. Tests used are: X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and thermodifferential analysis (TG, DTG, DTA), scanner-ing electron microscopy (SEM) morphological analysis. Last but not least, we underline the particular features of these tests whose interpretation allows a more precise definition of the bioactivity of a biocompatible material.
 ...
PMID:[The characteristics and properties of calcium phosphates in biomaterial formulations used in dentistry. 1]. 778 9

In order to develop analytical methods for identifying plaster or dental stone (calcium sulphate hemihydrate) and quantifying its content in gypsum-bonded dental casting investments, six dental gypsum products were studied by means of simultaneous differential thermal analysis-thermogravimetry (DTA-TG). Under the same analytical conditions employed in the present study, a phase change in calcium sulphate anhydrite (III-CaSO4 to II-CaSO4) was shown to occur at about 220 degrees C for four dental stones manufactured by various wet methods and at about 350 degrees C for two plasters manufactured by dry methods. This confirms the general view that the two types of calcium sulphate hemihydrate manufactured by dry or wet method could be identified by the DTA method. A reasonable estimate of chemically bound water could be made from the TG results at 300 degrees C. The present DTA-TG method can be used to identify the plaster or dental stone and calculate its content in gypsum-bonded casting investments.
 ...
PMID:Study of gypsum-bonded casting investments. Part 1. 837 96

Glass-ceramic powders with the oxide batch formulation 50wt%SiO2, 20wt%P2O5 and 30wt%CaO were prepared by the sol-gel process using tetraethoxysilane, calcium nitrate and phosphoric acid as raw materials. The obtained gels and powders were characterized by TG-DTA thermal analysis, FTIR analyses and XRD measurements. The results indicated that (1) heating to more than 600 degrees C brought about elimination of -OC2H5 side chains from gels, and formation of a SiO2-based glass network, (2) crystallization such as Ca3(PO4)2 notably occurred in the SiO2-based glass matrix when heated to more than 900 degrees C, (3) -OH groups existed on SiO2-based glass-ceramic surfaces in the temperature region less than 900 degrees C, and (4) the melting point of this composition was more than 1400 degrees C. This study suggests that sol-gel-derived SiO2-based glass-ceramic powder containing P and Ca might be useful as bioactive implant materials.
 ...
PMID:Characterization of 50wt%SiO2-20wt%P2O5-30wt%CaO glass-ceramic powders prepared by the sol-gel process. 955 50

Isocyanate group has been reported as a coupling agent of hydroxyapatite and polymers. The studies showed that the isocyanate would react with hydroxyl groups of hydroxyapatite and form a covalent bond between isocyanate and hydroxyapatite. In the study, hexamethlene diisocyanate (HMDI) was used as coupling agent. Calcium hydrogen-phosphate (CaHPO4, CHP) powders was the candidate ceramic due to higher content of hydroxyl group, which would react with HMDI at the temperature of 30, 40, 50, 60, and 70 degrees C for 4 hours. Dibutyltin dilaurate and hydroquinone were used as catalyst and inhibitor, respectively. The product was analyzed by DTA, TGA, FTIR, XRD, 13C solid state NMR and 31P, 13C liquid state NMR. From the results, we could prove the surface of calcium hydrogen-phosphate has been successfully modified. The largest amount (5.6 wt%) of HMDI could be grafted on the surface of CHP when reacted at 50 degrees C for 4 hours. Some chain extension could be observed and their structure would also be described in the research.
 ...
PMID:Preparation and characterization of surface-modified calcium hydrogenphosphate by hexamethylene diisocyanates. 1083 17

Galvanic sludge is classified as a hazardous waste and incineration is one of the techniques used for its treatment. The aim of this work is to study the thermal behavior of a galvanic sludge which contains only chromium as a restriction metal. Simultaneous DTA/TG coupled with mass spectrometer tests were performed to characterize the thermal behavior of the sludge. Besides thermal analysis, sludge samples were heated in a specially designed furnace and these samples were submitted to X-ray diffraction. Vapor from the heated sludge was condensed and the particles were analyzed by EDS microprobe coupled in a scanning electron microscope. The slag formed after the calcination of the galvanic sludge was mainly composed of a mixture of calcium phosphate and fluoride. and minor concentrations of metals. A total weight loss of 34% was observed. The greatest part of this weight loss corresponds to CO2, H2O and SO2. H2O is liberated in the temperature range of 500-1,250 degrees C. CO2 in the range of 500-750 degrees C and SO2 near 1,000 degrees C. Chromium evaporation was not observed in relevant quantities, about 99.6% of the Cr remained incorporated in the slag.
 ...
PMID:Thermal behaviour of chromium electroplating sludge. 1130 May 40

It is known that the organic molecules can provide an effective means to manipulate the surface properties of the biodegradable ceramic. There are two ways to modify the surface of the biodegradable ceramic by organic molecules. The first one is through surface adsorption but organic molecules will easily be washed out in the physiological environment. The second approach is to graft organic molecules through covalent bond to the hydroxyl groups that are available on the surface of the ceramics. Isocyanate group has been reported as a coupling agent for hydroxyapatite and organic molecule. The studies showed that the isocyanate could react with hydroxyl groups of hydroxyapatite and form a covalent bond between isocyanate and hydroxyapatite. In the study, hexamethylene diisocyanate (HMDI) was used as coupling agent and calcium hydrogenphosphate (CaHPO4, CHP) was the candidate ceramic. CHP will react with HMDI at the temperature of 20 degrees C, 30 degrees C, 40 degrees C, 50 degrees C, 60 degrees C, and 70 degrees C for 4h. Dibutyltin dilaurate and hydroquinone were used as catalyst and inhibitor, respectively. The effect of reaction temperature on the grafted yield will be described. The linkage between CHP and HMDI will be characterized by DTA, TGA, FTIR, XRD, and 31P, 13C liquid state NMR. From the results, we successfully modified the surface of CHP with coupling agent of HMDI. The grafted yield of HMDI on CHP was increasing with the reaction temperature. The best temperature for CHP modified by HMDI is around 50 degrees C. The linkage between HMDI and the surface of CHP is a urethane linkage as CHP-O-CO-NH-(CH2)6-N=C=O. After further treatment, the terminal group of CHP treated with HMDI (MCHP) will be converted into a primary amine group as the formula of CHP-O-CO-NH-(CH2)6-NH2. If reaction temperature is 60 degrees C, long extension chain will occur with a urea linkage between the isocyanate groups as the formula of CHP-O-CO-NH-(CH2)6-(NH-CO-NH-(CH2)6)n-NH2. At reaction temperature higher than 60 degrees C, the HMDI will become prepolymerized forms in solution. The prepolymerized forms such as allophanate, biuret, uretidione and urea linkage will turn the solution into gel type mixture, which will lead to low grafted yield of HMDI on CHP. When MCHP prepared at the temperature 20 degrees C, there is no evidence of long extension but the grafted yield is the lowest only 0.9 wt% around.
 ...
PMID:A study on grafting and characterization of HMDI-modified calcium hydrogenphosphate. 1160 90


1 2 3 4 5 6 7 Next >>