Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:4.1.1.6 (CAD)
 4,420 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The aim of this study was to determine the machinability of new silica-doped Y-TZP by CAD/CAM and the resistance to low temperature degradation of the milled sample by comparing with a commercial HIP type Y-TZP material. The copings could be milled from silica-doped Y-TZP blocks without chipping, and there was no significant difference between the two types of Y-TZP materials in either the marginal or the inner gap between the abutment and the coping. After aging, the monoclinic content in the commercial Y-TZP copings increased from 25% before testing to 65%, while that of silica-doped Y-TZP copings slightly increased from 23% to 30%. The silica-doped Y-TZP copings did not have any significant difference in fracture load in a comparison between the control group and the aging group, while the commercial Y-TZP copings had a significantly lower fracture load for the aging group than for the control group.
 ...
PMID:The relationship between milling a new silica-doped zirconia and its resistance to low-temperature degradation (LTD): a pilot study. 2227 13

The effect of ceramic veneering on the passivity of fit of cast metal and CAD/CAM-fabricated zirconia ceramic implant-supported three-unit cement-retained restorations was investigated, as well as the effect of misfit stress on the marginal integrity of ceramic veneers. Superstructures were fabricated using cast metal or by CAD/CAM milling of presintered or HIP zirconia ceramic (n=10). Before and after veneering, strain gages were used to measure in vitro the strain developed in all the restorations as a result of superstructure fixation. Fluorescent penetrant method was used to detect microcracks developed in ceramic veneers. Cast frameworks showed significantly higher strain values than CAD/CAM frameworks (p=0.000). Veneering significantly increased strain development in all CAD/CAM frameworks (p=0.000). Compared to zirconia ceramic restorations, significantly more microcracks were observed in cast restorations (p=0.000) both before and after superstructure fixation.
 ...
PMID:Microfractures in metal-ceramic and all-ceramic implant-supported fixed dental prostheses caused by superstructure fixation. 2267 63