Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:4.1.1.6 (CAD)
 4,420 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Urease was immobilized in a simple and effective way by physical aggregation using a precipitant-ammonium sulfate, followed by chemical cross-linking using a bifunctional reagent-glutaraldehyde to form insoluble Cross-linked urease aggregates (CLUAs). The optimum pH, optimum temperature and Km of CLUAs were 8.0, 70 degrees C and 0.021 mol/L respectively. Compared with that of free urease, the thermal stability, storage stability and resistance of cross-linked urease aggregates to the exogenous proteolysis were enhanced. The efficacy of CLUAs for the treatment of rats with chronic renal failure was also studies. The rats with chronic renal failure caused by adenine were divided into 3 groups randomly:the control group (fed with 10 mL water /kg per day), Coated Aldehyde Oxystarch (CAO) group (fed with 20 g CAO /kg and 10 mL water /kg per day) and CLUAs + CAO group (fed with 20 g CAO /kg and 10 mL CLUAs /kg per day) in which CAO was used to absorb the ammonia produced from urea. The contents of BUN and Scr in serum before and after 2 weeks treatment were determined. In three groups, the level of Scr decreased slightly (P = 0.922, 0.972 and 0.225 > 0.05 respectively) after treatment. The level of BUN was not changed (P = 0.211 > 0.05) in the control group, but decreased greatly BUN in both CAO group and CLUAs + CAO group (P = 0.004 < 0.05 and P < 0.001 respectively). Furthermore, the decrease of the BUN level after treatment in the CLUAs + CAO group was more remarkable than that in the CAO group (P = 0.016 < 0.05), which showed that the CLUAs + CAD system was more efficient than the CAO system for the removal of urea in serum.
 ...
PMID:[The preparation and application of cross-linked urease aggregates]. 1596 17

Satratoxin G (SG) is a macrocyclic trichothecene mycotoxin produced by Stachybotrys chartarum, the "black mold" suggested to contribute etiologically to illnesses associated with water-damaged buildings. Using an intranasal instillation model in mice, we found that acute SG exposure specifically induced apoptosis of olfactory sensory neurons (OSNs) in the olfactory epithelium. Dose-response analysis revealed that the no-effect and lowest-effect levels at 24 hr postinstillation (PI) were 5 and 25 microg/kg body weight (bw) SG, respectively, with severity increasing with dose. Apoptosis of OSNs was identified using immunohistochemistry for caspase-3 expression, electron microscopy for ultrastructural cellular morphology, and real-time polymerase chain reaction for elevated expression of the proapoptotic genes Fas, FasL, p75NGFR, p53, Bax, caspase-3, and CAD. Time-course studies with a single instillation of SG (500 microg/kg bw) indicated that maximum atrophy of the olfactory epithelium occurred at 3 days PI. Exposure to lower doses (100 microg/kg bw) for 5 consecutive days resulted in similar atrophy and apoptosis, suggesting that in the short term, these effects are cumulative. SG also induced an acute, neutrophilic rhinitis as early as 24 hr PI. Elevated mRNA expression for the proinflammatory cytokines tumor necrosis factor-alpha, interleukin-6 (IL-6) , and IL-1 and the chemokine macrophage-inflammatory protein-2 (MIP-2) were detected at 24 hr PI in both the ethmoid turbinates of the nasal airways and the adjacent olfactory bulb of the brain. Marked atrophy of the olfactory nerve and glomerular layers of the olfactory bulb was also detectable by 7 days PI along with mild neutrophilic encephalitis. These findings suggest that neurotoxicity and inflammation within the nose and brain are potential adverse health effects of exposure to satratoxins and Stachybotrys in the indoor air of water-damaged buildings.
 ...
PMID:Satratoxin G from the black mold Stachybotrys chartarum evokes olfactory sensory neuron loss and inflammation in the murine nose and brain. 1683 65

Three-dimensional printing (3DP) is a CAD/CAM built-up using ink-jet printing technique. Commercially available 3DP system can form only gypsum model and not for bioceramics. On the other hand, transformation of hardened gypsum into hydroxyapatite (HA) by treatment in ammonium phosphate solution was found lately. In the present study, transformation of the 3DP gypsum block to HA was attempted. However, the fabricated 3DP block was soluble in water. To insolubilize, it was heated at 300 degrees C for 10 min, and then, gypsum was transformed to calcium sulfate hemihydrate, CaSO(4) x 0.5H(2)O. The 3D block was immersed in 1M (NH(4))(3)PO(4) x 3H(2)O solution at 80 degrees C for 1-24 h, and the transformation into HA within 4 h was ascertained. A heat-treated plaster of Paris (POP) block was also investigated for comparison. The unheated POP block consisting of gypsum dihydrate took 24 h to complete the transformation, while the heat-treated POP consisting calcium sulfate hemihydrate promoted the transformation into HA; but the transformed thickness in the block was less than the 3DP block. This is probably due to higher solubility of the hemihydrate than gypsum dihydrate. Accelerated transformation of the 3DP block was also caused by its porous structure, which enabled an easy penetration of the phosphate solution. With the present method, it is possible to transform the fabricated gypsum by 3D printing that is adaptive to the osseous defect into HA prostheses or scaffold.
 ...
PMID:Transformation of 3DP gypsum model to HA by treating in ammonium phosphate solution. 1683 51

Kanamycin, an antibiotic complex produced by Streptomyces kanamycetius isolated from Japanese soil, was described by Okami and Umezawa as early as 1957 and consists of three components: Kanamycin A (the major component), B, and C. The disulfate salt of kanamycin A [4-O-(6-amino-6-deoxy-alpha-d-glucopyranosyl)-6-O-(3-amino-3-deoxy-alpha-d-glucopyranosyl)-2-deoxystreptamine] is a broad-spectrum antibiotic that is used to treat gonorrhea, salmonella, tuberculosis, and many other diseases. Crystals of kanamycin A monosulfate monohydrate obtained from water are triclinic, space group P1, with a=7.2294(14), b=12.4922(15), c=7.1168(9), alpha=94.74(1), beta=89.16(1), gamma=91.59(1), V=640.2(2)A(3), micro(CuKalpha)=18.4cm(-1), FW 600.6, D(calc)=1.558g/cm(3), CAD-4 diffractometric data (2693 reflections, 25543sigma(I)), structure by shelx-86 and refined by full-matrix least squares to a final R value of 0.038. The wrong conformer had an R value of 0.043. Both of the d-glucose moieties are attached to the deoxystreptamine by alpha linkages. This absolute configuration agrees with the earlier determination by both chemical and X-ray methods with photographic data. The (phi,psi) values for the glycosidic linkages are 101.6 degrees , -121.1 degrees , 106.3 degrees , and -140.4 degrees , respectively. Kanamycin interacts with the ribosomal S12 protein to stabilize the codon-anticodon binding between mRNA and the aminoacyl tRNA and inhibits the elongation of peptide chains through a series of reactions resulting in the prevention of ribosomes from moving along mRNA.
 ...
PMID:Crystal structure, conformation, and absolute configuration of kanamycin A. 1705 96

A hitherto unknown, isotope-exchange reaction is studied in ionized gaseous mixtures containing disulfur monoxide and water. The kinetics, mechanism, and intermediate of the reaction are investigated by experimental and theoretical methods. The reactivity of the S(2)O(*+) cation with water is investigated under a wide range of pressures ranging from 10(-7) to 10(-4) Torr, by FT-ICR, TQ, and high-resolution CAD mass spectrometry. In the high-pressure limit the reaction proves to be a route to strongly bound sulfur-containing species.
 ...
PMID:Isotope exchange in disulfur monoxide-water charged complexes: a mass spectrometric and computational study. 1766 13

Calcium aluminate decahydrate is hexagonal with the space group P6(3)/m and Z = 6. The compound has been named CaAl(2)O(4).10H(2)O (CAH(10)) for decades and is known as the product obtained by hydration of CaAl(2)O(4) (CA) in the temperature region 273-288 K - one of the main components in high-alumina cements. The lattice constants depend on the water content. Several sample preparations were used in this investigation: one CAH(10), three CAD(10) and one CA(D/H)(10), where the latter is a zero-matrix sample showing no coherent scattering contribution from the D/H atoms in a neutron diffraction powder pattern. The crystal structure including the positions of the H/D atoms was determined from analyses of four neutron diffraction powder patterns by means of the ab initio crystal structure determination program FOX and the FULLPROF crystal structure refinement program. Additionally, eight X-ray powder diffraction patterns (Cu Kalpha(1) and synchrotron X-rays) were used to establish phase purity. The analyses of these combined neutron and X-ray diffraction data clearly show that the previously published positions of the O atoms in the water molecules are in error. Thermogravimetric analysis of the CAD(10) sample preparation used for the neutron diffraction studies gave the composition CaAl(2)(OD)(8)(D(2)O)(2).2.42D(2)O. Neutron and X-ray powder diffraction data gave the structural formula CaAl(2)(OX)(8)(X(2)O)(2).gammaX(2)O (X = D, H and D/H), where the gamma values are sample dependent and lie between 2.3 and 3.3.
 ...
PMID:Structure of calcium aluminate decahydrate (CaAl2O4.10D2O) from neutron and X-ray powder diffraction data. 1800 40

Three dimensional grid phantoms offer a number of advantages for measuring imaging related spatial inaccuracies for image guided surgery and radiotherapy. The authors examined the use of rapid prototyping technology for directly fabricating 3D grid phantoms from CAD drawings. We tested three different fabrication process materials, photopolymer jet with acrylic resin (PJ/AR), selective laser sintering with polyamide (SLS/P), and fused deposition modeling with acrylonitrile butadiene styrene (FDM/ABS). The test objects consisted of rectangular arrays of control points formed by the intersections of posts and struts (2 mm rectangular cross section) and spaced 8 mm apart in the x, y, and z directions. The PJ/AR phantom expanded after immersion in water which resulted in permanent warping of the structure. The surface of the FDM/ABS grid exhibited a regular pattern of depressions and ridges from the extrusion process. SLS/P showed the best combination of build accuracy, surface finish, and stability. Based on these findings, a grid phantom for assessing machine-dependent and frame-induced MR spatial distortions was fabricated to be used for quality assurance in stereotactic neurosurgical and radiotherapy procedures. The spatial uniformity of the SLS/P grid control point array was determined by CT imaging (0.6 x 0.6 x 0.625 mm3 resolution) and found suitable for the application, with over 97.5% of the control points located within 0.3 mm of the position specified in CAD drawing and none of the points off by more than 0.4 mm. Rapid prototyping is a flexible and cost effective alternative for development of customized grid phantoms for medical physics quality assurance.
 ...
PMID:Technical note: rapid prototyping of 3D grid arrays for image guided therapy quality assurance. 1917 28

A simple, specific, and high throughput liquid chromatography tandem mass spectrometry method is developed for the determination of tenofovir, a nucleotide reverse transcriptase inhibitor, in human plasma using adefovir as internal standard. Plasma samples are prepared by solid-phase extraction of the analyte and internal standard using Waters Oasis MCX cartridges (1 cc, 30 mg). The chromatographic separation is achieved on a reversed-phase Chromolith, C18 analytical column (100 mmx4.6 mm, 5 microm) under isocratic conditions. The mobile phase consists of 0.5% formic acid in water and acetonitrile (90:10, v/v) to give a run time of 1.8 min. The protonated precursor-->product ion transitions for tenofovir and IS are monitored on a triple quadrupole mass spectrometer, operating in the multiple reaction monitoring and positive ion mode. The fragmentation pathways for tenofovir are studied by varying the collision energy (5-55 V) using nitrogen as CAD gas. A linear dynamic range of 3.1-1002.0 ng/mL is established using 0.2 mL plasma sample. The method is fully validated for its sensitivity, selectivity, accuracy and precision, matrix effect, recovery, stability, and dilution integrity. It is applied to a bioequivalence study in 43 human subjects after oral administration of 300 mg tablet formulation under fasting conditions.
 ...
PMID:Rapid and specific liquid chromatographic tandem mass spectrometric determination of tenofovir in human plasma and its fragmentation study. 1922 22

Cigarette smoking is the major cause of preventable morbidity and mortality in the United States and constitutes a major risk factor for atherosclerotic vascular disease, including coronary artery disease and stroke. Increasing evidence supports the hypothesis that oxidative stress and inflammation provide the pathophysiological link between cigarette smoking and CAD. Previous studies have shown that cigarette smoke activates leukocytes to release reactive oxygen and nitrogen species (ROS/RNS) and secrete pro-inflammatory cytokines, increases the adherence of monocytes to the endothelium and elicits airway inflammation. Here we present an overview of the direct effects of water-soluble cigarette smoke constituents on endothelial function, vascular ROS production and inflammatory gene expression. The potential pathogenetic role of peroxynitrite formation, and downstream mechanisms including poly(ADP-ribose) polymerase (PARP) activation in cardiovascular complications in smokers are also discussed.
 ...
PMID:Oxidative stress and accelerated vascular aging: implications for cigarette smoking. 1927 62

Clinically, zirconia-supported all-ceramic restorations are failing by veneer-chipping without exposing the zirconia interface. We hypothesized that mouth motion step-stress-accelerated fatigue testing of standardized dental crowns would permit this previously unrecognized failure mode to be investigated. Using CAD software, we imported the average dimensions of a mandibular first molar crown and modeled tooth preparation. The CAD-based tooth preparation was rapid-prototyped as a die for fabrication of zirconia core porcelain-veneered crowns. Crowns were bonded to aged composite reproductions of the preparation and aged 14 days in water. Crowns were single-cycle-loaded to failure or mouth-motion step-stress- fatigue-tested. Finite element analysis indicated high stress levels below the load and at margins, in agreement with only single-cycle fracture origins. As hypothesized, the mouth motion sliding contact fatigue resulted in veneer chipping, reproducing clinical findings allowing for investigations into the underlying causes of such failures.
 ...
PMID:Laboratory simulation of Y-TZP all-ceramic crown clinical failures. 1940 62


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>