Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.6.1.3 (ATPase)
 65,361 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Myosin V is a two-headed molecular motor that binds six light chains per heavy chain, which creates unusually long lever arms. This motor moves processively along its actin track in discrete 36-nm steps. Our model is that one head of the two-headed myosin V tightly binds to actin and swings its long lever arm through a large angle, providing a stroke. We created single-headed constructs with different-size lever arms and show that stroke size is proportional to lever arm length. In a two-headed molecule, the stroke provides the directional bias, after which the unbound head diffuses to find its binding site, 36 nm forward. Our two-headed construct with all six light chains per head reconstitutes the 36-nm processive step seen in tissue-purified myosin V. Two-headed myosin V molecules with only four light chains per head are still processive, but their step size is reduced to 24 nm. A further reduction in the length of the lever arms to one light chain per head results in a motor that is unable to walk processively. This motor produces single small approximately 6-nm strokes, and ATPase and pyrene actin quench measurements show that only one of the heads of this dimer rapidly binds to actin for a given binding event. These data show that for myosin V with its normal proximal tail domain, both heads and a long lever arm are required for large, processive steps.
 ...
PMID:Role of the lever arm in the processive stepping of myosin V. 1238 39

Myosin V is molecular motor that is capable of moving processively along actin filaments. The kinetics of monomeric myosin V containing a single IQ domain (MV 1IQ) differ from nonprocessive myosin II in that actin affinity is higher, phosphate release is extremely rapid, and ADP release is rate-limiting. We generated two mutants of myosin V by altering loop 2, a surface loop in the actin-binding region thought to alter actin affinity and phosphate release in myosin II, to determine the role that this loop plays in the kinetic tuning of myosin V. The loop 2 mutants altered the apparent affinity for actin (K(ATPase)) without altering the maximum ATPase rate (V(MAX)). Transient kinetic analysis determined that the rate of binding to actin, as well as the affinity for actin, was dependent on the net positive charge of loop 2, while other steps in the ATPase cycle were unchanged. The maximum rate of phosphate release was unchanged, but the affinity for actin in the M.ADP.Pi-state was dramatically altered by the mutations in loop 2. Thus, loop 2 is important for allowing myosin V to bind to actin with a relatively high affinity in the weak binding states but does not play a direct role in the product release steps. The ability to maintain a high affinity for actin in the weak binding states may prevent diffusion away from the actin filament and increase the degree of processive motion of myosin V.
 ...
PMID:Functional role of loop 2 in myosin V. 1499 98

Calcium activates the ATPase activity of tissue-purified myosin V, but not that of shorter expressed constructs. Here, we resolve this discrepancy by comparing an expressed full-length myosin V (dFull) to three shorter constructs. Only dFull has low ATPase activity in EGTA, and significantly higher activity in calcium. Based on hydrodynamic data and electron microscopic images, the inhibited state is due to a compact conformation that is possible only with the whole molecule. The paradoxical finding that dFull moved actin in EGTA suggests that binding of the molecule to the substratum turns it on, perhaps mimicking cargo activation. Calcium slows, but does not stop the rate of actin movement if excess calmodulin (CaM) is present. Without excess CaM, calcium binding to the high affinity sites dissociates CaM and stops motility. We propose that a folded-to-extended conformational change that is controlled by calcium and CaM, and probably by cargo binding itself, regulates myosin V's ability to transport cargo in the cell.
 ...
PMID:Myosin V: regulation by calcium, calmodulin, and the tail domain. 1500 63

Processivity in myosin V is mediated through the mechanical strain that results when both heads bind strongly to an actin filament, and this strain regulates the timing of ADP release. However, what is not known is which steps that lead to ADP release are affected by this mechanical strain. Answering this question will require determining which of the several potential pathways myosin V takes in the process of ADP release and how actin influences the kinetics of these pathways. We have addressed this issue by examining how magnesium regulates the kinetics of ADP release from myosin V and actomyosin V. Our data support a model in which actin accelerates the release of ADP from myosin V by reducing the magnesium affinity of a myosin V-MgADP intermediate. This is likely a consequence of the structural changes that actin induces in myosin to release phosphate. This effect on magnesium affinity provides a plausible explanation for how mechanical strain can alter this actin-induced acceleration. For actomyosin V, magnesium release follows phosphate release and precedes ADP release. Increasing magnesium concentration to within the physiological range would thus slow both the ATPase activity and the velocity of movement of this motor.
 ...
PMID:Magnesium regulates ADP dissociation from myosin V. 1557 1

We have performed a detailed biochemical kinetic and spectroscopic study on a recombinant myosin X head construct to establish a quantitative model of the enzymatic mechanism of this membrane-bound myosin. Our model shows that during steady-state ATP hydrolysis, myosin X exhibits a duty ratio (i.e. the fraction of the cycle time spent strongly bound to actin) of around 16%, but most of the remaining myosin heads are also actin-attached even at moderate actin concentrations in the so-called "weak" actin-binding states. Contrary to the high duty ratio motors myosin V and VI, the ADP release rate constant from actomyosin X is around five times greater than the maximal steady-state ATPase activity, and the kinetic partitioning between different weak actin-binding states is a major contributor to the rate limitation of the enzymatic cycle. Two different ADP states of myosin X are populated in the absence of actin, one of which shows very similar kinetic properties to actomyosin.ADP. The nucleotide-free complex of myosin X with actin shows unique spectral and biochemical characteristics, indicating a special mode of actomyosin interaction.
 ...
PMID:Mechanism of action of myosin X, a membrane-associated molecular motor. 1570 68

The processive motor myosin V has a relatively high affinity for actin in the presence of ATP and, thus, offers the unique opportunity to visualize some of the weaker, hitherto inaccessible, actin bound states of the ATPase cycle. Here, electron cryomicroscopy together with computer-based docking of crystal structures into three-dimensional (3D) reconstructions provide the atomic models of myosin V in both weak and strong actin bound states. One structure shows that ATP binding opens the long cleft dividing the actin binding region of the motor domain, thus destroying the strong binding actomyosin interface while rearranging loop 2 as a tether. Nucleotide analogs showed a second new state in which the lever arm points upward, in a prepower-stroke configuration (lever arm up) bound to actin before phosphate release. Our findings reveal how the structural elements of myosin V work together to allow myosin V to step along actin for multiple ATPase cycles without dissociating.
 ...
PMID:The structural basis of myosin V processive movement as revealed by electron cryomicroscopy. 1613 17

Unconventional myosin V takes many 36-nm steps along an actin filament before it dissociates, thus ensuring its ability to move cargo intracellularly over long distances. In the present study we assessed the structural features that affect processive run length by analyzing the properties of chimeras of mouse myosin V and a non-processive class V myosin from yeast (Myo4p) (Reck-Peterson, S. L., Tyska, M. J., Novick, P. J., and Mooseker, M. S. (2001) J. Cell Biol. 153, 1121-1126). Surprisingly a chimera containing the yeast motor domain on the neck and rod of mouse myosin V (Y-MD) showed longer run lengths than mouse wild type at low salt. Run lengths of mouse myosin V showed little salt dependence, whereas those of Y-MD decreased steeply with ionic strength, similar to a chimera containing yeast loop 2 in the mouse myosin V backbone. Loop 2 binds to acidic patches on actin in the weak binding states of the cycle (Volkmann, N., Liu, H., Hazelwood, L., Krementsova, E. B., Lowey, S., Trybus, K. M., and Hanein, D. (2005) Mol. Cell 19, 595-605). Constructs containing yeast loop 2, which has no net charge compared with +6 for wild type, showed a higher K(m) for actin in steady-state ATPase assays. The results imply that a positively charged loop 2 and a high affinity for actin are important to maintain processivity near physiologic ionic strength.
 ...
PMID:Processivity of chimeric class V myosins. 1637 34

There are three isoforms of class V myosin in mammals. While myosin Va has been studied well, little is known about the function of other myosin V isoforms (Vb and Vc) at a molecular level. Here we report the mechanoenzymatic function of human myosin Vb (HuM5B) for the first time. Electron microscopic observation showed that HuM5B has a double-headed structure with a long neck like myosin Va. V(max) and K(actin) of the actin-activated ATPase activity of HuM5B were 9.7 +/- 0.4 s(-)(1) and 8.5 +/- 0.1 microM, respectively. K(actin) and K(ATP) of the actin-activated ATPase activity were significantly higher than those of myosin Va. ADP markedly inhibited the ATPase activity. The rate of release of ADP from acto-HuM5B was 12.2 +/- 0.5 s(-)(1), which was comparable to the V(max) of the actin-activated ATPase activity. These results suggest that ADP release is the rate-limiting step for the actin-activated ATPase cycle; thus, HuM5B is a high duty ratio myosin. Consistently, the actin gliding velocity (0.22 +/- 0.03 microm/s) remained constant at a low motor density. The actin filament landing assay revealed that a single HuM5B molecule is sufficient to move the actin filament continuously, indicating that HuM5b is a processive motor.
 ...
PMID:Mechanoenzymatic characterization of human myosin Vb. 1648 66

The molecular mechanism of processive movement of single myosin molecules from classes V and VI along their actin tracks has recently attracted extraordinary attention. Another member of the myosin superfamily, myosin VII, plays vital roles in the sensory function of Drosophila and mammals. We studied the molecular mechanism of Drosophila myosin VIIa, using transient kinetics and single-molecule motility assays. Myosin VIIa moves along actin filaments as a processive, double-headed single molecule when dimerized by the inclusion of a leucine zipper at the C terminus of the coiled-coil domain. Its motility is approximately 8-10 times slower than that of myosin V, and its step size is 30 nm, which is consistent with the presence of five IQ motifs in its neck region. The kinetic basis for the processive motility of myosin VIIa is the relative magnitude of the release rate constants of phosphate (fast) and ADP (slow) as in myosins V and VI. The ATPase pathway is rate-limited by a reversible interconversion between two distinct ADP-bound actomyosin states, which results in high steady-state occupancy of a strongly actin-bound myosin species. The distinctive features of myosin VIIa (long run lengths, slow motility) will be very useful in video-based single-molecule applications. In cells, this kinetic behavior would allow myosin VIIa to exert and hold tension on actin filaments and, if dimerized, to function as a processive cargo transporter.
 ...
PMID:Dimerized Drosophila myosin VIIa: a processive motor. 1658 15

Unconventional myosin V (myoV) is an actin-based molecular motor that has a key function in organelle and mRNA transport, as well as in membrane trafficking. MyoV was the first member of the myosin superfamily shown to be processive, meaning that a single motor protein can 'walk' hand-over-hand along an actin filament for many steps before detaching. Full-length myoV has a low actin-activated MgATPase activity at low [Ca2+], whereas expressed constructs lacking the cargo-binding domain have a high activity regardless of [Ca2+] (refs 5-7). Hydrodynamic data and electron micrographs indicate that the active state is extended, whereas the inactive state is compact. Here we show the first three-dimensional structure of the myoV inactive state. Each myoV molecule consists of two heads that contain an amino-terminal motor domain followed by a lever arm that binds six calmodulins. The heads are followed by a coiled-coil dimerization domain (S2) and a carboxy-terminal globular cargo-binding domain. In the inactive structure, bending of myoV at the head-S2 junction places the cargo-binding domain near the motor domain's ATP-binding pocket, indicating that ATPase inhibition might occur through decreased rates of nucleotide exchange. The actin-binding interfaces are unobstructed, and the lever arm is oriented in a position typical of strong actin-binding states. This structure indicates that motor recycling after cargo delivery might occur through transport on actively treadmilling actin filaments rather than by diffusion.
 ...
PMID:Three-dimensional structure of the myosin V inhibited state by cryoelectron tomography. 1662 8


<< Previous 1 2 3 4 5 Next >>