Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.4.24.27 (thermolysin)
 1,894 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

We reported that several aquaporin-2 (AQP2) point mutants that cause nephrogenic diabetes insipidus (NDI) are retained in the endoplasmic reticulum (ER) of transfected mammalian cells and degraded but can be rescued by chemical chaperones to function as plasma membrane water channels (Tamarappoo, B. K., and Verkman, A. S. (1998) J. Clin. Invest. 101, 2257-2267). To test whether mutant AQP2 proteins are misfolded, AQP2 folding was assessed by comparative detergent extractability and limited proteolysis, and AQP2 degradation kinetics was measured by label-pulse-chase and immunoprecipitation. In ER membranes from transfected CHO cells containing [(35)S]methionine-labeled AQP2, mutants T126M and A147T were remarkably detergent-resistant; for example wild-type AQP2 was >95% solubilized by 0.5% CHAPS whereas T126M was <10% solubilized. E258K, an NDI-causing AQP2 mutant which is retained in the Golgi, is highly detergent soluble like wild-type AQP2. The mutants and wild-type AQP2 were equally susceptible to digestion by trypsin, thermolysin, and proteinase K. Stopped-flow light scattering measurements indicated that T126M AQP2 at the ER was fully functional as a water channel. Pulse-chase studies indicated that the increased degradation rates for T126M (t((1)/(2)) 2.5 h) and A147T (2 h) compared with wild-type AQP2 (4 h) involve a brefeldin A-resistant, ER-dependent degradation mechanism. After growth of cells for 48 h in the chemical chaperone glycerol, AQP2 mutants T126M and A147T became properly targeted and relatively detergent-soluble. These results provide evidence that NDI-causing mutant AQP2 proteins are misfolded, but functional, and that chemical chaperones both correct the trafficking and folding defects. Strategies to facilitate protein folding might thus have therapeutic efficacy in NDI.
 ...
PMID:Misfolding of mutant aquaporin-2 water channels in nephrogenic diabetes insipidus. 1057 54

This is a comparative study of the performance of thermolysin for enzymatic peptide synthesis by reversed hydrolysis in several different reaction systems. Z-Gln-Leu-NH(2) was synthesized in acetonitrile containing 5% water (with various catalyst preparation methods) as well as by the "solid-to-solid" and frozen aqueous methods. Reaction rates (values in nanomoles per minute per milligram) in acetonitrile depended significantly on the method of addition of enzyme: (a) direct suspension in the reaction mixture as freeze-dried powders gave 60 to 95; (b) addition as an aqueous solution, so that enzyme precipitates on mixing with acetonitrile, gave 230; (c) addition as an aqueous suspension gave a remarkable increase in reaction rates (up to 780); (d) immobilized enzymes (adsorbed at saturating loading on celite, silica, Amberlite XAD-7, or polypropylene, then dried by propanol rinsing) all gave <230. It is postulated that, starting with the enzyme already in the form of solid particles in aqueous buffer, there is a minimum chance of alteration of its optimal conformation during transfer to the organic medium. For solid-to-solid synthesis with 10% water content we found initial rates of 670 under optimized conditions. In frozen aqueous synthesis, rates were <10. Equilibrium yields were always around 60% in low water organic solvent, whereas they were found to >80% in the aqueous systems studied.
 ...
PMID:Comparison of methods for thermolysin-catalyzed peptide synthesis including a novel more active catalyst. 1091 38

Enzymatic peptide synthesis can be carried out efficiently in solid-to-solid reaction mixtures with 10% (w/w) water added to a mixture of substrates. The final reaction mass contains >/=80% (by weight) of product. This article deals with acid-base effects in such reaction mixtures and the consequences for the enzyme. In the Thermoase-catalyzed synthesis of Z-Asp-Phe-OMe, the reaction rate is strongly dependent on the amount of basic salts added to the system. The rate increases 20 times, as the KHCO(3) or K(2)CO(3) added is raised 2.25-fold from an amount equimolar to the Phe-OMe. HCL starting material. With further increases in KHCO(3) addition, the initial rate remains at the maximum, but with K(2)CO(3) it drops sharply. Addition of NaHCO(3) is less effective, but rates are faster if more water is used. With >1.5 equivalents of basic salt, the final yield of the reaction decreases. Similar effects are observed when thermolysin catalyzes the same reaction, or Z-Gln-Leu-NH(2) synthesis. These effects can be rationalized using a model estimating the pH of these systems, taking into account the possible formation of up to ten different solid phases.
 ...
PMID:Kinetics of enzymatic solid-to-solid peptide synthesis: synthesis of Z-aspartame and control of acid-base conditions by using inorganic salts. 1108 96

Dipeptidyl peptidase III (DPP III) (EC 3.4.14.4), which has a HELLGH-E (residues 450-455, 508) motif as the zinc binding site, is classified as a zinc metallopeptidase. The zinc dissociation constants of the wild type, Leu(453)-deleted, and E508D mutant of DPP III at pH 7.4 were 4.5 (+/-0.7) x 10(-13), 5.8 (+/-0.7) x 10(-12), and 3.2 (+/-0.9) x 10(-10) M, respectively. The recoveries of the enzyme activities by the addition of various metal ions to apo-DPP III were also measured, and Co(2+), Ni(2+), and Cu(2+) ions completely recovered the enzyme activities as did Zn(2+). The dissociation constants of Co(2+), Ni(2+), and Cu(2+) ions for apo-DPP III at pH 7.4 were 8.2 (+/-0.9) x 10(-13), 2.7 (+/-0.3) x 10(-12), and 1.1 (+/-0.1) x 10(-14) M, respectively. The shape of the absorption spectrum of Co(2+)-DPP III was very similar to that of Co(2+)-carboxypeptidase A or Co(2+)-thermolysin, in which the Co(2+) is bound to two histidyl nitrogens, a water molecule, and a glutamate residue. The absorption spectrum of Cu(2+)-DPP III is also very similar to that of Cu(2+)-thermolysin. The EPR spectrum and the EPR parameters of Cu(2+)-DPP III were very similar to those of Cu(2+)-thermolysin but slightly different from those of Cu(2+)-carboxypeptidase A. The five lines of the superfine structure in the perpendicular region of the EPR spectrum in Cu(2+)-DPP III suggest that nitrogen atoms should coordinate to the cupric ion in Cu(2+)-DPP III. All of these data suggest that the donor set and the coordination geometry of the metal ions in DPP III, which has the HExxxH motif as the metal binding site, are very similar to those of the metal ions in thermolysin, which has the HExxH motif.
 ...
PMID:Characterization of the metal-substituted dipeptidyl peptidase III (rat liver). 1157 Aug 86

The botulinum neurotoxin type A (BoNT/A) light chain (LC) acts as zinc endopeptidase. The X-ray structure of the toxin demonstrated that Zn(2+) is coordinated by His(222) and His(226) of the Zn(2+) binding motif HisGluXXHis and Glu(261), whereas Glu(223) coordinates the water molecule required for hydrolysis as the fourth ligand. Recent analysis of a cocrystal of the BoNT/B LC and its substrate synaptobrevin 2 suggested that Arg(362) and Tyr(365) of the homologous BoNT/A may be directly involved in catalysis. Their role and that of Glu(350) which is also found in the vicinity to the active site were analyzed by site-directed mutagenesis. Various replacements of Arg(362) and substitution of Tyr(365) with Phe resulted in 79- and 34-fold lower k(cat)/K(m) values, respectively. These changes were provoked by decreased catalytic rates (k(cat)) and not by alterations of ground state substrate binding as evidenced by largely unchanged K(d) and K(m) values. None of these mutations affected the overall secondary structure or zinc content of the LC. These findings suggest that the guanidino group of Arg(362) and the hydroxyl group of Tyr(365) together accomplish transition state stabilization as was proposed for thermolysin, being the prototypical member of the gluzincin superfamily of metalloproteases. Mutation of Glu(350) dramatically diminished the hydrolytic activity which must partly be attributed to an altered active site fine structure as demonstrated by an increased sensitivity toward heat-induced denaturing and a lower Zn(2+) binding affinity. Glu(350) apparently occupies a central position in the active site and presumably positions His(222) and Arg(362).
 ...
PMID:Arg(362) and Tyr(365) of the botulinum neurotoxin type a light chain are involved in transition state stabilization. 1182 15

The catalytic mechanism for peptide hydrolysis by thermolysin has been investigated using the B3LYP hybrid density functional method. The starting structure for the calculations was based on the X-ray crystal structure of the enzyme inhibited with the ZF (p)LA phosphonamidate transition-state analogue. Besides the three Zn ligands His142, His146 and Glu166, a few additional residues were also included in the model. Following the order of importance, the outer-sphere ligands Glu143, His231 and Asp226 were shown to play significant catalytic roles, well correlated with results from site-directed mutagenesis experiments. A single-step reaction mechanism was obtained starting from the initial enzyme-substrate complex with a pentacoordinated metal center and proceeding to the enzyme-carboxylate complex as a final product, following a proposal by Matthews and co-workers. The transition state combines a nucleophilic water oxygen attack on the peptide carbon and a proton transfer from the water to the peptide nitrogen, mediated by the Glu143 carboxylate. A free activation energy of 15.2 kcal/mol was obtained, compared to the experimental 12.4-16.3 kcal/mol range for various peptide substrates. An interesting aspect of the present single-step mechanism is that the Glu143 carboxylate moves a significant distance of ~1.0 A. Different chemical models were examined, both related to the system size and proper side-chain modeling. The significance of the protein frame rigidity around the active site was estimated by fixing and subsequently releasing the edge atom positions. Finally, alternative mechanistic proposals are briefly summarized.
 ...
PMID:A theoretical study of the mechanism for peptide hydrolysis by thermolysin. 1193 52

The hydrophobic component to the binding affinities of one acyclic phosphinate (4) and three macrocyclic phosphonamidate inhibitors (1-3) to the zinc peptidase thermolysin was probed by varying the solvent composition. Increasing the percentage of ethanol in the buffer solution over the range 0-9% increases the inhibition constants, K(i), by up to an order of magnitude. This approach represents an experimental method for distinguishing solvation from conformational or other effects on protein-ligand binding. The size of the "antihydrophobic effect" is correlated with the amount of hydrophobic surface area sequestered from solvent on association of the inhibitor and enzyme, although it is attenuated from that calculated from the surface tension of ethanol-water mixtures. The results are consistent with the Lum-Chandler-Weeks explanation for the size dependence of the hydrophobic effect.
 ...
PMID:Antihydrophobic solvent effects: an experimental probe for the hydrophobic contribution to enzyme-inhibitor binding. 1194 21

Attaining higher levels of catalytic activity of enzymes in organic solvents is one of the major challenges in nonaqueous enzymology. One of the most successful strategies for enhancing enzyme activity in organic solvents involves tuning the enzyme active site by molecular imprinting with substrates or their analogues. Unfortunately, numerous imprinters of potential importance are poorly soluble in water, which significantly limits the utility of this method. In the present study, we have developed strategies that overcome this limitation of the molecular-imprinting technique and that thus expand its applicability beyond water-soluble ligands. The solubility problem can be addressed either by converting the ligands into a water-soluble form or by adding relatively high concentrations of organic cosolvents, such as tert-butyl alcohol and 1,4-dioxane, to increase their solubility in the lyophilization medium. We have succeeded in applying both of these strategies to produce imprinted thermolysin, subtilisin, and lipase TL possessing up to 26-fold higher catalytic activity in the acylation of paclitaxel and 17beta-estradiol compared to nonimprinted enzymes. Furthermore, we have demonstrated for the first time that molecular imprinting and salt activation, applied in combination, produce a strong additive activation effect (up to 110-fold), suggesting different mechanisms of action involved in these enzyme activation techniques.
 ...
PMID:Molecular imprinting of enzymes with water-insoluble ligands for nonaqueous biocatalysis. 1199 51

Proteolytic digestion of dried bonito muscle with thermolysin produces a hydrolysate with strong angiotensin-converting enzyme (ACE) inhibitory activity and is the basis of a dietary supplement with antihypertensive activity. A major portion of the ACE activity was shown previously to arise from the peptide Leu-Lys-Pro-Asn-Met (LKPNM). A straightforward method to quantify this peptide was developed using one-step C18 solid-phase extraction (SPE) followed by LC-MS/MS quantification. The SPE step resulted in a hydrolysate that was still crude, as illustrated by combined size-exclusion chromatography/multi-angle laser light scattering detection that showed that a major fraction of oligopeptides were in the 2-20 kDa range. This fraction has a weight-average molecular weight (M(w)) of approximately 5.0 kDa. Method validation for specificity, linearity, accuracy, precision, and reproducibility showed that standard additions of synthetic LKPNM to bonito extract with SPE enrichment followed by LC-MS/MS is a suitably robust procedure for the determination of LKPNM content. The method was also successful for encapsulated powders in which the excipients used are insoluble in water and could be removed by centrifugation.
 ...
PMID:Determination of angiotensin-converting enzyme inhibitory peptide Leu-Lys-Pro-Asn-Met (LKPNM) in bonito muscle hydrolysates by LC-MS/MS. 1208 59

In the last few years, an increasing number of biotechnological techniques have been applied to the restoration and conservation of works of art, paintings, old maps, and papers or books. Enzymes can solve problems that give restorers difficulties, although for many applications it is not possible to use soluble enzymes; therefore, it is necessary to look for suitable carriers for immobilization. Different methods for covalent immobilization of enzymes to polyamide nonwovens were tested, using thermolysin as an example. Two distinct strategies were pursued: (1). controlled, partial hydrolysis of the polymer and subsequent binding of the enzyme to the released amino and carboxy groups; and (2). attachment of reactive groups directly to the polyamide without disintegrating the polymeric structure (O-alkylation). Different spacers were used for covalent fixation of the enzyme in both cases. The enzyme was fixed to the released amino groups by glutaraldehyde, either with or without a spacer. Either way, active enzyme could be immobilized to the matrix. However, intense treatment caused severe damage to the stability of the nonwoven fabric, and reduced the mechanical strength. Conditions were investigated to conserve the nonwoven fabric structure while obtaining near-maximum immobilized enzyme activity. Immobilization of the enzyme to the released carboxy group after acid hydrolysis was performed using dicyclohexylcarbodiimide. In comparison to the enzyme bound via the amino group, the yield of immobilized enzyme activity was slightly lower when benzidine was taken as spacer and still lower with a 1,6-hexanediamine spacer. O-alkylation performed with dimethylsulfate caused severe damage to the nonwoven fabric structure. Considerably better results were obtained with triethyloxonium tetrafluoroborate. As the spacers 1,6-hexanediamine and adipic acid dihydrazide were used, activation for immobilizing thermolysin was performed with glutaraldehyde, adipimidate, and azide. With the exception of azide, all combinations of spacers and activation reagents gave high yields of immobilized enzyme activity. Thermolysin immobilized by this technique showed a remarkably improved stability with respect to elevated temperature, extreme pH values, and reduced polarity. The nonwoven fabric can be stored for weeks without loss of enzyme activity by washing with distilled water and drying.
 ...
PMID:Immobilization of thermolysin to polyamide nonwoven materials. 1258 60


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>