Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.4.23.16 (HIV-1 protease)
 2,107 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The structure of a crystal complex of recombinant human immunodeficiency virus type 1 (HIV-1) protease with a peptide-mimetic inhibitor containing a dihydroxyethylene isostere insert replacing the scissile bond has been determined. The inhibitor is Noa-His-Hch psi [CH(OH)CH(OH)]Vam-Ile-Amp (U-75875), and its Ki for inhibition of the HIV-1 protease is < 1.0 nM (Noa = 1-naphthoxyacetyl, Hch = a hydroxy-modified form of cyclohexylalanine, Vam = a hydroxy-modified form of valine, Amp = 2-pyridylmethylamine). The structure of the complex has been refined to a crystallographic R factor of 0.169 at 2.0 A resolution by using restrained least-squares procedures. Root mean square deviations from ideality are 0.02 A and 2.4 degrees, for bond lengths and angles, respectively. The bound inhibitor diastereomer has the R configurations at both of the hydroxyl chiral carbon atoms. One of the diol hydroxyl groups is positioned such that it forms hydrogen bonds with both the active site aspartates, whereas the other interacts with only one of them. Comparison of this X-ray structure with a model-built structure of the inhibitor, published earlier, reveals similar positioning of the backbone atoms and of the side-chain atoms in the P2-P2' region, where the interaction with the protein is strongest. However, the X-ray structure and the model differ considerably in the location of the P3 and P3' end groups, and also in the positioning of the second of the two central hydroxyl groups. Reconstruction of the central portion of the model revealed the source of the hydroxyl discrepancy, which, when corrected, provided a P1-P1' geometry very close to that seen in the X-ray structure.
 ...
PMID:Crystal structure of a complex of HIV-1 protease with a dihydroxyethylene-containing inhibitor: comparisons with molecular modeling. 130 83

The activity of the avian myeloblastosis virus (AMV) or the human immunodeficiency virus type 1 (HIV-1) protease on peptide substrates which represent cleavage sites found in the gag and gag-pol polyproteins of Rous sarcoma virus (RSV) and HIV-1 has been analyzed. Each protease efficiently processed cleavage site substrates found in their cognate polyprotein precursors. Additionally, in some instances heterologous activity was detected. The catalytic efficiency of the RSV protease on cognate substrates varied by as much as 30-fold. The least efficiently processed substrate, p2-p10, represents the cleavage site between the RSV p2 and p10 proteins. This peptide was inhibitory to the AMV as well as the HIV-1 and HIV-2 protease cleavage of other substrate peptides with Ki values in the 5-20 microM range. Molecular modeling of the RSV protease with the p2-p10 peptide docked in the substrate binding pocket and analysis of a series of single-amino acid-substituted p2-p10 peptide analogues suggested that this peptide is inhibitory because of the potential of a serine residue in the P1' position to interact with one of the catalytic aspartic acid residues. To open the binding pocket and allow rotational freedom for the serine in P1', there is a further requirement for either a glycine or a polar residue in P2' and/or a large amino acid residue in P3'. The amino acid residues in P1-P4 provide interactions for tight binding of the peptide in the substrate binding pocket.
 ...
PMID:Mechanism of inhibition of the retroviral protease by a Rous sarcoma virus peptide substrate representing the cleavage site between the gag p2 and p10 proteins. 133 Oct 99

The specificity of the proteinase of myeloblastosis-associated virus (MAV) was studied with (a) 21 substrate-based inhibitors, (b) 9 inhibitors with pseudopalindrome sequences, (c) 8 chimeric inhibitors, and (d) 3 compounds designed as human immunodeficiency virus 1 (HIV-1) proteinase inhibitors. The central inhibitory unit (transition state or cleaved bond analog) and the role of the inhibitor side chains from P4 to P4' were investigated. MAV proteinase prefers an aromatic side chain in P1 and a small aliphatic nonpolar chain in P2 and P2'. Residues in P5 and P4 positions are outside of the short catalytic cleft of the enzyme, but still influence binding considerably. The data obtained provide evidence that the MAV proteinase has generally lower specificity and poorer binding than the HIV proteinase.
 ...
PMID:15gag proteinase of myeloblastosis-associated virus: specificity studies with substrate-based inhibitors. 141 1

The muscle and heart lactate dehydrogenase (LDHs) of rabbit and pig are specifically cleaved at a single position by HIV-1 protease, resulting in the conversion of 36-kDa subunits of the oligomeric enzymes into 21- and 15-kDa protein bands as analyzed by SDS-PAGE. While the proteolysis was observed at neutral pH, it became more pronounced at pH 6.0 and 5.0. The time courses of the cleavage of the 36-kDa subunits were commensurate with the time-dependent loss of both quaternary structure and enzymatic activity. These results demonstrated that deoligomerization of rabbit muscle LDH at acidic pH rendered its subunits more susceptible to proteolysis, suggesting that a partially denatured form of the enzyme was the actual substrate. Proteolytic cleavage of the rabbit muscle enzyme occurred at a decapeptide sequence, His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp (scissile bond denoted throughout by an asterisk), which constitutes a "strand-loop" element in the muscle and heart LDH structures and contains the active site histidyl residue His-193. The kinetic parameters Km, Vmax/KmEt, and Vmax/Et for rabbit muscle LDH and the synthetic decapeptide Ac-His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp-NH2 were nearly identical, suggesting that the decapeptide within the protein substrate is conformationally mobile, as would be expected for the peptide substrate in solution. Insertion of part of this decapeptide sequence into bacterial galactokinase likewise rendered this protein susceptible to proteolysis by HIV-1 protease, and site-directed mutagenesis of this peptide in galactokinase revealed that the Glu residue at the P2' was important to binding to HIV-1 protease. Crystallographic analysis of HIV-1 protease complexed with a tight-binding peptide analogue inhibitor derived from this decapeptide sequence revealed that the "strand-loop" structure of the protein substrate must adopt a beta-sheet structure upon binding to the protease. The Glu residue in the P2' position of the inhibitor likely forms hydrogen-bonding interactions with both the alpha-amide and gamma-carboxylic groups of Asp-30 in the substrate binding site.
 ...
PMID:Proteolysis of an active site peptide of lactate dehydrogenase by human immunodeficiency virus type 1 protease. 142 Jan 38

Truncation of a peptide substrate in the N-terminus and replacement of its scissile amide bond with a non-cleavable reduced bond results in a potent inhibitor of HIV-1 protease. A series of such inhibitors has been synthesized, and S2-S3' subsites of the protease binding cleft mapped. The S2 pocket requires bulky Boc or PIV groups, large aromatic Phe residues are preferred in P1 and P1' and Glu in P2'. The S3' pocket prefers Phe over small Ala or Val. Introduction of a Glu residue into the P2' position yields a tight-binding inhibitor of HIV-1 protease, Boc-Phe-[CH2-NH]-Phe-Glu-Phe-OMe, with a subnanomolar inhibition constant. The relevant peptide derived from the same amino acid sequence binds to the protease with a Ki of 110 nM, thus still demonstrating a good fit of the amino acid residues into the protease binding pockets and also the importance of the flexibility of P1-P1' linkage for proper binding. A new type of peptide bond mimetic, N-hydroxylamine -CH2-N(OH)-, has been synthesized. Binding of hydroxylamino inhibitor of HIV-1 protease is further improved with respect to reduced-bond inhibitor.
 ...
PMID:Reduced-bond tight-binding inhibitors of HIV-1 protease. Fine tuning of the enzyme subsite specificity. 154 26

Statistical analysis of an expanded data base of regions in viral polyproteins and in non-viral proteins that are sensitive to hydrolysis by the protease from human immunodeficiency virus (HIV) type 1 has generated a model which characterizes the substrate specificity of this retroviral enzyme. The model leads to an algorithm for predicting protease-susceptible sites from primary structure. Amino acids in each of the sites from P4 to P4' are tabulated for 40 protein substrates, and the frequency of occurrence for each residue is compared to the natural abundance of that amino acid in a selected data set of globular proteins. The results suggest that the highest stringency for particular amino acid residues is at the P2, P1, and P2' positions of the substrate. The broad specificity of the HIV-1 protease appears to be a consequence of its being able to bind productively substrates in which interactions with only a few Pi or Pi' side-chains need be optimized. The analysis, extended to 22 protein segments cleaved by the HIV-2 protease, delineates marked differences in specificity from that of the HIV-1 enzyme.
 ...
PMID:A cumulative specificity model for proteases from human immunodeficiency virus types 1 and 2, inferred from statistical analysis of an extended substrate data base. 186 Aug 61

We show here for the first time that actin, troponin C, Alzheimer amyloid precursor protein (AAP), and pro-interleukin 1 beta (pro-IL-1 beta), are substrates of the protease encoded by the human immunodeficiency virus (HIV) type-1. As has been seen in other non-viral protein substrates of the HIV protease, the presence of Glu residues in the P2' position appears to play an important role in substrate recognition. Three of the four bonds cleaved in actin, two of the three in troponin C, and all of the bonds hydrolyzed in AAP and pro-IL-1 beta have a P2' Glu residue. In fact, Glu residues are accommodated in all positions from P4 to P4' surrounding the scissile bond in substrates of the HIV proteases, and as many as 4 adjacent Glu residues were seen in one of the bonds cleaved in AAP. This study of non-viral protein substrates has also revealed unexpected amino acids such as Gly, Arg, and Glu in the scissile bond itself rather than the more conventional hydrophobic amino acids. The HIV-2 protease hydrolyzed actin in a manner similar to that of the HIV-1 enzyme, but its cleavage of troponin C was distinct in that it split a bond adjacent to a triplet of Glu residues in P2, P3, and P4 that was refractory to the HIV-1 enzyme. Documentation of cleavage sites in the several important cellular proteins noted above has extended our understanding of the features in a substrate that are recognized by these multi sub-site proteases of retroviral maturation. Moreover, the present work adds to an accumulating body of evidence which demonstrates that these enzymes can damage crucial structural and regulatory cellular proteins if ever their activity is expressed outside the viral particle itself.
 ...
PMID:Actin, troponin C, Alzheimer amyloid precursor protein and pro-interleukin 1 beta as substrates of the protease from human immunodeficiency virus. 190 79

Substrates of HIV-1 protease are classified into three groups (A, B and C) based on the amino acid residues present at P1' and P2' sites. Replacement of the scissile amide bond by phenylnorstatine in representative substrate analog sequences from class A, B and C, yielded inhibitors of HIV-1 protease. Of the twelve inhibitors synthesized in this series, class C substrate analog inhibitors are more potent inhibitors (Ki's 3.3-24 microM) than either class A or class B inhibitors. In this series of inhibitors, the (2S,3S) isomer of phenylnorstatine is preferred over the other isomers as a "transition state element" for design of inhibitors of HIV-1 protease.
 ...
PMID:Substrate analog inhibitors of HIV-1 protease containing phenylnorstatine as a transition state element. 193 Feb 14

We have observed a high correlation between the intermolecular interaction energy (Einter) calculated for HIV-1 protease inhibitor complexes and the observed in vitro enzyme inhibition. A training set of 33 inhibitors containing modifications in the P1' and P2' positions was used to develop a regression equation which relates Einter and pIC50. This correlation was subsequently employed to successfully predict the activity of proposed HIV-1 protease inhibitors in advance of synthesis in a structure-based design program. This included a precursor, 47, to the current phase II clinical candidate, L-735,524 (51). The development of the correlation, its applications, and its limitations are discussed, and the force field (MM2X) and host molecular mechanics program (OPTIMOL) used in this work are described.
 ...
PMID:A priori prediction of activity for HIV-1 protease inhibitors employing energy minimization in the active site. 783 Feb 73

The rational design and synthesis of a highly potent inhibitor of HIV-1 protease have been accomplished. The inhibitor, SB 206343, is based on a model derived from the structure of the MVT-101/HIV-1 protease complex and contains a 4(5)-acylimidazole ring as an isosteric replacement for the P1'--P2' amide bond. It is a competitive inhibitor with an apparent inhibition constant of 0.6 nM at pH 6.0. The three-dimensional structure of SB 206343 bound in the active site of HIV-1 protease has been determined at 2.3 A resolution by X-ray diffraction techniques and refined to a crystallographic discrepancy factor, R (= sigma parallel Fo magnitude of/Fc parallel/sigma magnitude of), of 0.194. The inhibitor is held in the enzyme by a set of hydrophobic and polar interactions. N-3 of the imidazole ring participates in a novel hydrogen-bonding interaction with the bound water molecule, demonstrating the effectiveness of the imidazole ring as an isosteric replacement for the P1'--P2' amide bond in hydroxyethylene-based HIV-1 protease inhibitors. Also present are hydrogen-bonding interactions between N-1 of the imidazole ring and the carbonyl of Gly-127 as well as between the imidazole acyl carbonyl oxygen and the amide nitrogen of Asp-129, exemplifying the peptidomimetic nature of the 4(5)-acylimidazole isostere. All of these interactions are in qualitative agreement with those predicted by the model.
 ...
PMID:Rational design, synthesis, and crystallographic analysis of a hydroxyethylene-based HIV-1 protease inhibitor containing a heterocyclic P1'--P2' amide bond isostere. 793 33


1 2 3 4 5 6 7 8 Next >>