Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.4.23.16 (HIV-1 protease)
 2,107 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Site-directed mutagenesis of autolysis sites in the human immunodeficiency virus type 1 (HIV-1) protease was applied in an analysis of enzyme specificity; the protease served, therefore, as both enzyme and substrate in this study. Inspection of natural substrates of all retroviral proteases revealed the absence of beta-branched amino acids at the P1 site and of Lys anywhere from P2 through P2'. Accordingly, several mutants of the HIV-1 protease were engineered in which these excluded amino acids were substituted at their respective P positions at the three major sites of autolysis in the wild-type protease (Leu5-Trp6, Leu33-Glu34, and Leu63-Ile64), and the mutant enzymes were evaluated in terms of their resistance to autodegradation. All of the mutant HIV-1 proteases, expressed as inclusion bodies in Escherichia coli, were enzymatically active after refolding, and all showed greatly diminished rates of cleavage at the altered autolysis sites. Some, however, were not viable enzymatically because of poor physical characteristics. This was the case for mutants having Lys replacements of Glu residues at P2' and for another in which all three P1 leucines were replaced by Ile. However, one of the mutant proteases, Q7K/L33I/L63I, was highly resistant to autolysis, while retaining the physical properties, specificity, and susceptibility to inhibition of the wild-type enzyme. Q7K/L33I/L63I should find useful application as a stable surrogate of the HIV-1 protease. Overall, our results can be interpreted relative to a model in which the active HIV-1 protease dimer is in equilibrium with monomeric, disordered species which serve as the substrates for autolysis.
 ...
PMID:The HIV-1 protease as enzyme and substrate: mutagenesis of autolysis sites and generation of a stable mutant with retained kinetic properties. 806 16

The crystal structure of HIV-2 protease in complex with a reduced amide inhibitor [BI-LA-398; Phe-Val-Phe-psi (CH2NH)-Leu-Glu-Ile-amide] has been determined at 2.2-A resolution and refined to a crystallographic R factor of 17.6%. The rms deviation from ideality in bond lengths is 0.018 A and in bond angles is 2.8 degrees. The largest structural differences between HIV-1 and HIV-2 proteases are located at residues 15-20, 34-40, and 65-73, away from the flap region and the substrate binding sites. The rms distance between equivalent C alpha atoms of HIV-1 and HIV-2 protease structures excluding these residues is 0.5 A. The shapes of the S1 and S2 pockets in the presence of this inhibitor are essentially unperturbed by the amino acid differences between HIV-1 and HIV-2 proteases. The interaction of the inhibitor with HIV-2 protease is similar to that observed in HIV-1 protease structures. The unprotected N terminus of the inhibitor interacts with the side chains of Asp-29 and Asp-30. The glutamate side chain of the inhibitor forms hydrogen bonds with the main-chain amido groups of residues 129 and 130.
 ...
PMID:Crystal structure of human immunodeficiency virus (HIV) type 2 protease in complex with a reduced amide inhibitor and comparison with HIV-1 protease structures. 837 11

We showed previously that a commercially available synthetic tetradecapeptide, Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser, produces authentic angiotensin I (Ang I) upon incubation with the HIV-1 protease (S. K. Sharma et al., Anal. Biochem. 198:363, 1991). Therefore, we developed an Ang-I based activity assay for HIV protease inhibitors based on the technology developed earlier (M. J. Ruwart et al., Pharm. Res. 7:407, 1990; S. K. Sharma et al., Anal. Biochem. 186:24, 1990) for tracking renin inhibitors in rat sera. Ditekiren was either extracted from sera with ethyl acetate or assayed after the interfering substances in sera were precipitated with acetonitrile. Purified recombinant HIV-1 protease was added to extracted rat serum and the enzymatic reaction was initiated in the presence of the tetradecapeptide substrate. The inhibition of Ang I production was measured by a commercially available RIA kit. The cleanup methodology also enabled a commercially available Proteinase Scintillation Proximity Assay (SPA, Amersham) to quantify ditekiren in rat serum through the addition of recombinant HIV-1 protease and cleavage of substrate from SPA beads. Results were confirmed by HPLC or by the renin assay for ditekiren, which inhibits both aspartyl proteases. These technologies should prove useful for assessing serum levels of HIV protease inhibitors in rat.
 ...
PMID:Development of activity assays for high-volume evaluation of human immunodeficiency virus (HIV) protease inhibitors in rat serum: results with ditekiren. 848 39

The crystal structure of human immunodeficiency virus (HIV) type 2 protease has been determined in complexes with peptidic inhibitors Noa-His-Cha psi [CH(OH)CH(OH)]Val-Ile-Amp (U75875) and Qnc-Asn-Cha psi [CH(OH)CH2]Val-Npt(U92163) (where Noa is naphthyloxyacetyl, Cha is cyclohexylalanine, Amp is 2-aminomethylpyridine, Qnc is quinoline-2-carbonyl, and Npt is neopentylamine), which have dihydroxyethylene and hydroxyethylene moieties, respectively, in place of the normal scissile bond of the natural ligand. The complexes crystallize in space group P2(1)2(1)2(1), with one dimer-inhibitor complex per asymmetric unit and average cell dimensions of a = 33.28 A, b = 45.35 A, c = 135.84 A. Data were collected to approximately 2.5-A resolution. The model structures were refined with resulting R-factors of around 0.19. As expected, the HIV-2 protease structure is approximately C2-symmetric with a gross structure very similar to that of the HIV-1 enzyme. The inhibitors bind in an extended conformation positioned lengthwise in the binding cleft in a manner similar to that found in the HIV-1 protease-inhibitor complexes previously reported. The substitution of the bulkier Ile82 side chain in the HIV-2 protease may help explain the better ability of HIV-2 protease to bind and hydrolyze ligands with small P1 and P1' side groups. It appears that differences in specificity between the proteases of HIV-1 and HIV-2 are not merely a result of simple side chain substitutions, but may be complicated by differences in main chain flexibility as well.
 ...
PMID:The crystallographic structure of the protease from human immunodeficiency virus type 2 with two synthetic peptidic transition state analog inhibitors. 851 51

A rapid and semiquantitative method is described for determining the relative kcat/Km for individual peptides in defined substrate mixtures. The method utilizes electrospray ionization/mass spectrometry alone to semiquantitatively determine relative peptide substrate turnover rates. Unlike previous studies, in which chromatographic separation of individual peptide species was required, this mass spectrometric-based method relies strictly on the ability to ionize and detect simultaneously all peptide species in a defined mixture. Differences in the ion intensities of the individual components before and after incubation with protease are used to semiquantitatively determine preferred substrates. This method was used to the identify preferred peptide substrates for HIV-1 protease. Optimal substrates were identified from a defined synthetic peptide substrate mixture based on Ser-Gln-Asn-Tyr-Pro-Ile-Val, where the P1' proline was substituted with 20 naturally occurring amino acids. The hydrophobic residues Leu, Ile, Val, Phe, and Tyr were preferred in addition to Pro at the P1' site. The results were corroborated by performing the more laborious HPLC/Frit-fast atom bombardment/MS analyses.
 ...
PMID:HIV-1 protease specificity derived from a complex mixture of synthetic substrates. 857 4

The HIV-1 protease (PR) is essential for the production of mature virions. As such, it has become a target for the development of anti-HIV chemotherapeutics. Multiple passages of virus in cell culture in the presence of PR inhibitors have resulted in the selection of variants with decreased sensitivity to inhibitors of the PR. The most common alteration observed is a single amino acid change at position 82. This particular position has been well characterized by several laboratories as being important for the susceptibility of the virus to inhibitors of PR function. Mutations which result in the substitution of the wild-type valine with alanine, phenylalanine, threonine or isoleucine at position 82 of the PR have been associated with decreased sensitivity to several PR inhibitors. We describe here a clinical strain of HIV-1 that contains an isoleucine at position 82 of the PR instead of the usual valine. This strain is unique in that it was isolated from a patient that was anti-retroviral naive, and in the past, variants at position 82 of the PR have only been found after treatment of patients or cell culture with PR inhibitors. Moreover, this virus remains sensitive to PR inhibitors of the cyclic urea and C-2 symmetrical diol classes.
 ...
PMID:Identification of a clinical isolate of HIV-1 with an isoleucine at position 82 of the protease which retains susceptibility to protease inhibitors. 858 57

Inhibitors of HIV-1 protease represent a new class of antiretroviral compounds. Here, we report the design and synthesis of two novel C2 symmetry-based inhibitors, MP-134 and MP-167, specifically targeted against HIV-1 variants with reduced sensitivity to another related protease inhibitor, A-77003. In addition, we describe the in vitro selection of viral variants with reduced sensitivity of these two protease inhibitors. An isoleucine-to-valine substitution at residue 84 (I84V) of the HIV-1 protease confers resistance to MP-134, whereas a glycine-to-valine substitution at residue 48 (G48V) confers resistance to MP-167. Testing other protease inhibitors against these variants has revealed specific overlapping patterns of resistance among these agents. These findings have important implications in the design of combination regimens using multiple protease inhibitors and underscore the need to develop non-cross-resistant compounds to be used toward this goal.
 ...
PMID:Design, synthesis, and resistance patterns of MP-134 and MP-167, two novel inhibitors of HIV type 1 protease. 882 19

AG1343 ([3S-(3R*,4aR*,8aR*,2'S*,3'S*)]-2-[2' hydroxy-3'-phenylthiomethyl-4'-aza-5'-oxo-5'-(2''-methyl-3''-hydro xy-phenyl) pentyl]-decahydroiso-quinoline-3-N-t-butylcarboxamide methanesulfonic acid) is a selective, nonpeptidic inhibitor of human immunodeficiency virus (HIV) protease (Ki = 2 nM) that was discovered by protein structure-based drug design methodologies. AG1343 was effective against the replication of several laboratory and clinical HIV type 1 (HIV-1) or HIV-2 isolates including pyridinone- and zidovudine-resistant strains, with 50% effective concentrations ranging from 9 to 60 nM. In reversibility studies, inhibition of gag (p55) proteolytic processing in HIV-1 particles from cells treated with AG1343 was maintained for up to 36 h after drug removal. The ability of virus to develop resistance to AG1343 was studied by serial passage of HIV-1 NL4.3 in the presence of increasing concentrations of drug. After 28 passages, a variant with a 30-fold reduction in susceptibility to AG1343 was isolated. Molecular analysis of the protease from this variant indicated a double change from a Met to Ile at residue 46 and an Ile to Val or Ala at residue 84 (M46I+I84V, A). Consistent with these findings, reductions in susceptibility were observed for recombinant viruses constructed to contain the single I84V change or the double M46I+I84V substitutions. Resistance, however, was not detected for recombinant viruses containing other key mutations in HIV-1 protease, including a Val to Ile change at residue 32 or a Val to Ala or Phe at residue 82. The potent anti-HIV activity of AG1343 against several isolates suggests that AG1343 should perform well during ongoing human phase II clinical trials.
 ...
PMID:Antiviral and resistance studies of AG1343, an orally bioavailable inhibitor of human immunodeficiency virus protease. 883 68

The human immunodeficiency virus type-1 (HIV-1) encodes a protease which is essential for the production of infectious virus. The protease prefers substrates that contain glutamic acid or glutamine at the P2' position. The catalytic role of these residues has been studied by using a highly specific fluorogen substrate, 2-aminobenzoyl-Thr-Ile-Nle-Phe(NO2)-Gln-Arg (substrate QR), and its counterpart (substrate ER) containing Glu in place of Gln. The newly designed substrate ER that contains a pair of charged residues at P2' and P3' sites is the most specific substrate described so far for HIV-1 protease. The specificity rate constant (kcat/Km = 2.1 x 10(7) M-1 s-1) approaches, but does not reach, the diffusion limit. This follows from the appreciable solvent kinetic deuterium isotope effects on the rate constants, indicating that, independent of the salt concentration, the rate-limiting step of the catalysis is a chemical process rather than a physical one. The reaction also has positive entropy of activation. On the other hand, the rate-limiting step for substrate QR changes with increasing salt concentration from a physical to chemical step, while the negative activation entropy becomes positive. The rate increase with substrate ER is 50-fold with respect to substrate QR in the presence of 0.1 M NaCl and diminishes to 3.5-fold at 2.0 M NaCl concentration, as a consequence of a considerable rate increase at high salt concentration with substrate QR but not with substrate ER. The Km value is much lower for the substrate ER (0.8 microM) than for substrate QR (15 microM), indicating a more effective binding for substrate ER at 0.1 M NaCl. Unexpectedly, the strong binding appears to be achieved by the unionized form of Glu in P2', as follows from the remarkably different pH-rate profiles for substrates QR and ER. The effective binding elicited by the glutamic acid may be utilized in designing inhibitors for therapeutic purposes.
 ...
PMID:Rate-determining steps in HIV-1 protease catalysis. The hydrolysis of the most specific substrate. 894 73

To evaluate the available peptidic and pseudopeptidic inhibitors of HIV protease for their possible in vivo activity, a screening test using Escherichia coli was established. E. coli cells carrying the plasmid pET9c-PR containing the gene for HIV-1 protease under the control of a T7-promotor are grown in the absence and in the presence of inhibitors. The action of the toxic protease produced by the cells is counteracted by the inhibitors. Provided sufficient membrane permeability of the inhibitors exists, this results in accelerated cell growth. From the peptides known to be active in an in-vitro enzyme test, most compounds inhibit HIV protease only to a limited degree in this test. However, two short peptides (Ac-Ser-Tyr-Glu-Leu and Lys-Ile-Ser-Tyr-Asp-Tyr) protect cell growth to an considerabe extent, thus indicating that they reach the E. coli cytosol and there block HIV protease. Two pseudopeptides known to be very potent in the enzyme test (SDZ PRI 053 and CIBA 61755) also inhibit HIV-1 protease strongly in this cell growth test.
 ...
PMID:Screening of inhibitors of HIV-1 protease using an Escherichia coli cell assay. 914 91


<< Previous 1 2 3 4 5 6 Next >>