Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.4.23.16 (HIV-1 protease)
 2,107 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The structure of a crystal complex of recombinant human immunodeficiency virus type 1 (HIV-1) protease with a peptide-mimetic inhibitor containing a dihydroxyethylene isostere insert replacing the scissile bond has been determined. The inhibitor is Noa-His-Hch psi [CH(OH)CH(OH)]Vam-Ile-Amp (U-75875), and its Ki for inhibition of the HIV-1 protease is < 1.0 nM (Noa = 1-naphthoxyacetyl, Hch = a hydroxy-modified form of cyclohexylalanine, Vam = a hydroxy-modified form of valine, Amp = 2-pyridylmethylamine). The structure of the complex has been refined to a crystallographic R factor of 0.169 at 2.0 A resolution by using restrained least-squares procedures. Root mean square deviations from ideality are 0.02 A and 2.4 degrees, for bond lengths and angles, respectively. The bound inhibitor diastereomer has the R configurations at both of the hydroxyl chiral carbon atoms. One of the diol hydroxyl groups is positioned such that it forms hydrogen bonds with both the active site aspartates, whereas the other interacts with only one of them. Comparison of this X-ray structure with a model-built structure of the inhibitor, published earlier, reveals similar positioning of the backbone atoms and of the side-chain atoms in the P2-P2' region, where the interaction with the protein is strongest. However, the X-ray structure and the model differ considerably in the location of the P3 and P3' end groups, and also in the positioning of the second of the two central hydroxyl groups. Reconstruction of the central portion of the model revealed the source of the hydroxyl discrepancy, which, when corrected, provided a P1-P1' geometry very close to that seen in the X-ray structure.
 ...
PMID:Crystal structure of a complex of HIV-1 protease with a dihydroxyethylene-containing inhibitor: comparisons with molecular modeling. 130 83

The muscle and heart lactate dehydrogenase (LDHs) of rabbit and pig are specifically cleaved at a single position by HIV-1 protease, resulting in the conversion of 36-kDa subunits of the oligomeric enzymes into 21- and 15-kDa protein bands as analyzed by SDS-PAGE. While the proteolysis was observed at neutral pH, it became more pronounced at pH 6.0 and 5.0. The time courses of the cleavage of the 36-kDa subunits were commensurate with the time-dependent loss of both quaternary structure and enzymatic activity. These results demonstrated that deoligomerization of rabbit muscle LDH at acidic pH rendered its subunits more susceptible to proteolysis, suggesting that a partially denatured form of the enzyme was the actual substrate. Proteolytic cleavage of the rabbit muscle enzyme occurred at a decapeptide sequence, His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp (scissile bond denoted throughout by an asterisk), which constitutes a "strand-loop" element in the muscle and heart LDH structures and contains the active site histidyl residue His-193. The kinetic parameters Km, Vmax/KmEt, and Vmax/Et for rabbit muscle LDH and the synthetic decapeptide Ac-His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp-NH2 were nearly identical, suggesting that the decapeptide within the protein substrate is conformationally mobile, as would be expected for the peptide substrate in solution. Insertion of part of this decapeptide sequence into bacterial galactokinase likewise rendered this protein susceptible to proteolysis by HIV-1 protease, and site-directed mutagenesis of this peptide in galactokinase revealed that the Glu residue at the P2' was important to binding to HIV-1 protease. Crystallographic analysis of HIV-1 protease complexed with a tight-binding peptide analogue inhibitor derived from this decapeptide sequence revealed that the "strand-loop" structure of the protein substrate must adopt a beta-sheet structure upon binding to the protease. The Glu residue in the P2' position of the inhibitor likely forms hydrogen-bonding interactions with both the alpha-amide and gamma-carboxylic groups of Asp-30 in the substrate binding site.
 ...
PMID:Proteolysis of an active site peptide of lactate dehydrogenase by human immunodeficiency virus type 1 protease. 142 Jan 38

The angiotensin I-based peptide Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Glu-Glu-Ser yields angiotensin I (Ang I) and Leu-Glu-Glu-Ser upon hydrolysis by the human immunodeficiency virus type 1 (HIV-1) protease, but not by human renin. N-terminal sequencing of the reaction products showed that the HIV-1 protease cleaved exclusively at the Leu-Leu bond. The rate of Ang I formation can be measured by a radioimmunoassay, since the parent peptide has minimal cross reactivity in this assay. The rate of enzymatic hydrolysis is maximal at pH 4.5-5.0 and at an ionic strength of 1 M. At 37 degrees C, 0.1 M Na acetate buffer, pH 5.0, 1 M NaCl, 10% glycerol, 5% ethylene glycol, 1 mg/ml bovine serum albumin, and 3 mM EDTA, the reaction obeys Michaelis-Menten type kinetics with Km = 17.2 +/- 3.5 microM and kcat = 2.30 +/- 0.33 min-1. The activity assay readily quantitates as little as 0.25 nM of HIV-1 protease. The production of Ang I by the HIV-1 protease is inhibited in the presence of a HIV-1 protease inhibitor. The newly discovered substrate is relatively insensitive to human or monkey serum. Therefore, the effect of sera from 20 patients with advanced acquired immunodeficiency disease syndrome (AIDS) on Ang I production in the above assay system was examined. Results of this study indicate that it may be possible to adapt the above Ang I-based system to determine blood levels of HIV-1 protease inhibitors in AIDS patients during clinical trials.
 ...
PMID:An ultrasensitive human immunodeficiency virus type 1 protease radioimmuno rate assay with a potential for monitoring blood levels of protease inhibitors in acquired immunodeficiency disease syndrome patients. 144 99

A critical step in the replicative cycle of the human immunodeficiency virus HIV-1 involves the proteolytic processing of the polyprotein products Prgag and Prgag-pol that are encoded by the gag and pol genes in the viral genome. Inhibitors of this processing step have the potential to be important therapeutic agents in the management of acquired immunodeficiency syndrome. Current assays for inhibitors of HIV-1 protease are slow, cumbersome, or susceptible to interference by test compounds. An approach to the generation of a rapid, sensitive assay for HIV-1 protease inhibitors that is devoid of interference problems is to use a capture system which allows for isolation of the products from the reaction mixture prior to signal quantitation. In this paper, we describe a novel method for the detection of HIV-1 protease inhibitors utilizing the concept of particle concentration fluorescence. Our approach involves the use of the HIV-1 protease peptide substrate Ser-Gln-Asn-Tyr-Pro-Ile-Val which has been modified to contain a biotin moiety on one side and a fluorescein reporter molecule on the other side of the scissile Tyr-Pro bond. This substrate is efficiently cleaved by the HIV-1 protease and the reaction can be readily quantitated. Known inhibitors of the protease were readily detected using this new assay. In addition, this approach is compatible with existing instrumentation in use for broad screening and is highly sensitive, accurate, and reproducible.
 ...
PMID:Design and implementation of a particle concentration fluorescence method for the detection of HIV-1 protease inhibitors. 162 70

The standard angiotensin I (Ang I) radioimmunoassay for renin activity determination is a useful clinical tool for the diagnosis of high renin levels in certain cases of hypertension. It depends upon the liberation of Ang I from human plasma angiotensinogen. We considered whether a commercially available synthetic tetradecapeptide (TDP), Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser, would produce authentic Ang I upon incubation with protease from human immunodeficiency virus type 1 (HIV-1). This peptide is also known to be cleaved by renin at the Leu-Leu bond to yield the decapeptide Ang I. When the TDP is incubated with the HIV-1 protease, the peptide is readily hydrolyzed. Product formation is linear with respect to time and enzyme concentration. HPLC analysis of reaction products showed two new peaks, as one would expect from the cleavage of a TDP into a decapeptide and a tetrapeptide. Amino acid analysis of HPLC-purified peaks confirmed that the HIV-1 protease cleaves TDP at the Leu10-Leu11 site to produce the desired decapeptide, Ang I. Production of Ang I by the HIV-1 protease, like human renin, is inhibited in the presence of a protease inhibitor. Implications of the discovery of an HIV-1 protease substrate that produces authentic Ang I are discussed in light of a screening assay for soluble HIV-1 protease inhibitors.
 ...
PMID:Could angiotensin I be produced from a renin substrate by the HIV-1 protease? 179 23

Two protected peptides Boc-Val-Ser(Bzl)-Gln-Asn-Tyr(BrZ)OH and Boc-Val-Ser(Bzl)-Gln-Asn-Tyr(BrZ)-ProOH were synthesized on a resin substituted by 9-(hydroxymethyl)-2-fluoreneacetic acid. After cleavage with piperidine/DMF, desalting, and activation, these peptides were used for the synthesis of 11 analogs of an HIV proteinase nonapeptide substrate Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val-Gln-NH2 using fragment condensation in solid phase. The fragment condensation was made in an ultrasonic bath. Using only 2 equivalents of the activated peptide in a DMF solution, this reaction was complete in 2 h. All nonapeptides were assayed as substrates for HIV-1 and HIV-2 proteinases.
 ...
PMID:Synthesis of homologous peptides using fragment condensation: analogs of an HIV proteinase substrate. 180 63

The peptidolytic reaction of HIV-1 protease has been investigated by using four oligopeptide substrates, Ac-Ser-Gln-Asn-Tyr-Pro-Val-Val-NH2, Ac-Arg-Ala-Ser-Gln-Asn-Tyr-Pro-Val-Val-NH2, Ac-Ser-Gln-Ser-Tyr-Pro-Val-Val-NH2, and Ac-Arg-Lys-Ile-Leu-Phe-Leu-Asp-Gly-NH2, that resemble two cleavage sites found within the naturally occurring polyprotein substrates Pr55gag and Pr160gag-pol. The values for the kinetic parameters V/KEt and V/Et were 0.16-7.5 mM-1 s-1 and 0.24-29 s-1, respectively, at pH 6.0, 0.2 M NaCl, and 37 degrees C. By use of a variety of inorganic salts, it was concluded that the peptidolytic reaction is nonspecifically activated by increasing ionic strength. V/K increased in an apparently parabolic fashion with increasing ionic strength, while V was either increased or decreased slightly. From product inhibition studies, the kinetic mechanism of the protease is either random or ordered uni-bi, depending on the substrate studied. The reverse reaction or a partial reverse reaction (as measured by isotope exchange of the carboxylic product into substrate) was negligible for most of the oligopeptide substrates, but the enzyme catalyzed the formation of Ac-Ser-Gln-Asn-Tyr-Phe-Leu-Asp-Gly-NH2 from the products Ac-Ser-Gln-Asn-Tyr and Phe-Leu-Asp-Gly-NH2. The protease-catalyzed exchange of an atom of 18O from H2 18O into the re-formed substrates occurred at a rate which was 0.01-0.12 times that of the forward peptidolytic reaction. The results of these studies are in accord with the formation of a kinetically competent enzyme-bound amide hydrate intermediate, the collapse of which is the rate-limiting chemical step in the reaction pathway.
 ...
PMID:Human immunodeficiency virus-1 protease. 1. Initial velocity studies and kinetic characterization of reaction intermediates by 18O isotope exchange. 188 30

We have demonstrated the use of a radioimmunoassay to quantitate the peptidolytic activity of human immunodeficiency virus, type 1 (HIV-1) protease using a tetradecapeptide substrate of porcine renin, Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser. HIV-1 protease catalyzes cleavage of this substrate at the same Leu-Leu bond as does porcine renin, resulting in the formation of authentic angiotensin-I. The angiotensin-I product is then detected by use of a commercially available renin plasma assay kit, which constitutes the basis of the RIA. The radioimmunoassay provides detection of the protease-catalyzed formation of angiotensin-I at picomolar concentrations in vitro. We demonstrate the use of this assay in determining IC50 values for two HIV-1 protease inhibitors present in cell culture media and in standard assay buffer. An example of the potential development of this assay for the quantitation of these inhibitors present in ex vivo plasma samples is also presented.
 ...
PMID:Adaptation of the plasma renin radioimmunoassay for use with HIV-1 protease. 195 69

The crystal structure of a complex between chemically synthesized human immunodeficiency virus type 1 (HIV-1) protease and an octapeptide inhibitor has been refined to an R factor of 0.138 at 2.5-A resolution. The substrate-based inhibitor, H-Val-Ser-Gln-Asn-Leu psi [CH(OH)CH2]Val-Ile-Val-OH (U-85548e) contains a hydroxyethylene isostere replacement at the scissile bond that is believed to mimic the tetrahedral transition state of the proteolytic reaction. This potent inhibitor has Ki less than 1 nM and was developed as an active-site titrant of the HIV-1 protease. The inhibitor binds in an extended conformation and is involved in beta-sheet interactions with the active-site floor and flaps of the enzyme, which form the substrate/inhibitor cavity. The inhibitor diastereomer has the S configuration at the chiral carbon atom of the hydroxyethylene insert, and the hydroxyl group is within H-bonding distance of the two active-site carboxyl groups in the enzyme dimer. The two subunits of the enzyme are related by a pseudodyad, which superposes them at a 178 degrees rotation. The main difference between the subunits is in the beta turns of the flaps, which have different conformations in the two monomers. The inhibitor has a clear preferred orientation in the active site and the alternative conformation, if any, is a minor one (occupancy of less than 30%). A new model of the enzymatic mechanism is proposed in which the proteolytic reaction is viewed as a one-step process during which the nucleophile (water molecule) and electrophile (an acidic proton) attack the scissile bond in a concerted manner.
 ...
PMID:Structure at 2.5-A resolution of chemically synthesized human immunodeficiency virus type 1 protease complexed with a hydroxyethylene-based inhibitor. 199 77

The nonapeptide Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val-Gln has been reported as a model substrate for an aspartyl protease produced by the human immunodeficiency virus (HIV-1). Cleavage of this peptide at the Tyr-Pro linkage to produce tetra- and pentapeptide fragments is the basis of high-performance liquid chromatographic assays to detect HIV-1 protease activity. Confirmation of the cleavage site has been proved by using microbore liquid chromatography coupled to a dynamic fast atom bombardment interface. Comparison with fortified control incubates indicates that an approximate stoichiometric amount of the tetrapeptide was formed from the nonapeptide, confirming that the cleavage of the substrate by HIV-1 protease is both specific and quantitative.
 ...
PMID:Microbore liquid chromatography coupled to a flow fast atom bombardment probe for the on-line detection of the Tyr-Pro cleavage of a nonapeptide by recombinant HIV-1 protease. 202 29


1 2 3 4 5 6 Next >>