Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.4.23.16 (HIV-1 protease)
 2,107 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The activity of the avian myeloblastosis virus (AMV) or the human immunodeficiency virus type 1 (HIV-1) protease on peptide substrates which represent cleavage sites found in the gag and gag-pol polyproteins of Rous sarcoma virus (RSV) and HIV-1 has been analyzed. Each protease efficiently processed cleavage site substrates found in their cognate polyprotein precursors. Additionally, in some instances heterologous activity was detected. The catalytic efficiency of the RSV protease on cognate substrates varied by as much as 30-fold. The least efficiently processed substrate, p2-p10, represents the cleavage site between the RSV p2 and p10 proteins. This peptide was inhibitory to the AMV as well as the HIV-1 and HIV-2 protease cleavage of other substrate peptides with Ki values in the 5-20 microM range. Molecular modeling of the RSV protease with the p2-p10 peptide docked in the substrate binding pocket and analysis of a series of single-amino acid-substituted p2-p10 peptide analogues suggested that this peptide is inhibitory because of the potential of a serine residue in the P1' position to interact with one of the catalytic aspartic acid residues. To open the binding pocket and allow rotational freedom for the serine in P1', there is a further requirement for either a glycine or a polar residue in P2' and/or a large amino acid residue in P3'. The amino acid residues in P1-P4 provide interactions for tight binding of the peptide in the substrate binding pocket.
 ...
PMID:Mechanism of inhibition of the retroviral protease by a Rous sarcoma virus peptide substrate representing the cleavage site between the gag p2 and p10 proteins. 133 Oct 99

The muscle and heart lactate dehydrogenase (LDHs) of rabbit and pig are specifically cleaved at a single position by HIV-1 protease, resulting in the conversion of 36-kDa subunits of the oligomeric enzymes into 21- and 15-kDa protein bands as analyzed by SDS-PAGE. While the proteolysis was observed at neutral pH, it became more pronounced at pH 6.0 and 5.0. The time courses of the cleavage of the 36-kDa subunits were commensurate with the time-dependent loss of both quaternary structure and enzymatic activity. These results demonstrated that deoligomerization of rabbit muscle LDH at acidic pH rendered its subunits more susceptible to proteolysis, suggesting that a partially denatured form of the enzyme was the actual substrate. Proteolytic cleavage of the rabbit muscle enzyme occurred at a decapeptide sequence, His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp (scissile bond denoted throughout by an asterisk), which constitutes a "strand-loop" element in the muscle and heart LDH structures and contains the active site histidyl residue His-193. The kinetic parameters Km, Vmax/KmEt, and Vmax/Et for rabbit muscle LDH and the synthetic decapeptide Ac-His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp-NH2 were nearly identical, suggesting that the decapeptide within the protein substrate is conformationally mobile, as would be expected for the peptide substrate in solution. Insertion of part of this decapeptide sequence into bacterial galactokinase likewise rendered this protein susceptible to proteolysis by HIV-1 protease, and site-directed mutagenesis of this peptide in galactokinase revealed that the Glu residue at the P2' was important to binding to HIV-1 protease. Crystallographic analysis of HIV-1 protease complexed with a tight-binding peptide analogue inhibitor derived from this decapeptide sequence revealed that the "strand-loop" structure of the protein substrate must adopt a beta-sheet structure upon binding to the protease. The Glu residue in the P2' position of the inhibitor likely forms hydrogen-bonding interactions with both the alpha-amide and gamma-carboxylic groups of Asp-30 in the substrate binding site.
 ...
PMID:Proteolysis of an active site peptide of lactate dehydrogenase by human immunodeficiency virus type 1 protease. 142 Jan 38

The angiotensin I-based peptide Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Glu-Glu-Ser yields angiotensin I (Ang I) and Leu-Glu-Glu-Ser upon hydrolysis by the human immunodeficiency virus type 1 (HIV-1) protease, but not by human renin. N-terminal sequencing of the reaction products showed that the HIV-1 protease cleaved exclusively at the Leu-Leu bond. The rate of Ang I formation can be measured by a radioimmunoassay, since the parent peptide has minimal cross reactivity in this assay. The rate of enzymatic hydrolysis is maximal at pH 4.5-5.0 and at an ionic strength of 1 M. At 37 degrees C, 0.1 M Na acetate buffer, pH 5.0, 1 M NaCl, 10% glycerol, 5% ethylene glycol, 1 mg/ml bovine serum albumin, and 3 mM EDTA, the reaction obeys Michaelis-Menten type kinetics with Km = 17.2 +/- 3.5 microM and kcat = 2.30 +/- 0.33 min-1. The activity assay readily quantitates as little as 0.25 nM of HIV-1 protease. The production of Ang I by the HIV-1 protease is inhibited in the presence of a HIV-1 protease inhibitor. The newly discovered substrate is relatively insensitive to human or monkey serum. Therefore, the effect of sera from 20 patients with advanced acquired immunodeficiency disease syndrome (AIDS) on Ang I production in the above assay system was examined. Results of this study indicate that it may be possible to adapt the above Ang I-based system to determine blood levels of HIV-1 protease inhibitors in AIDS patients during clinical trials.
 ...
PMID:An ultrasensitive human immunodeficiency virus type 1 protease radioimmuno rate assay with a potential for monitoring blood levels of protease inhibitors in acquired immunodeficiency disease syndrome patients. 144 99

The protease from simian immunodeficiency virus (SIV) was chemically synthesized by automated solid-phase technology as an NH2-terminally extended derivative, capped with biotin. Biotin-linker-(SIV protease (1-99)): the linker segment, Gly-Gly-Asp-Arg-Gly-Phe-Ala-Ala, corresponds to the amino acid sequence preceding that of the protease in the SIV gag/pol precursor polyprotein. Accordingly, the Ala-Pro bond joining the octapeptide linker to the protease constitutes a site naturally cleaved by the protease during viral maturation. This strategy for synthesis was designed to facilitate purification of the biotinylated protein derivative from a complex mixture of reaction products by avidin/agarose-affinity chromatography and to provide the means for autocatalytic removal of the biotin-linker segment. As anticipated, folding of the full-length construct leads to activation of the enzyme and excision of the desired 99-residue SIV protease (overall yield, approximately). The specificity of the synthetic SIV protease toward a number of well characterized protein substrates was the same as observed for the nearly identical enzyme from human immunodeficiency virus type 2 (HIV-2 protease) and distinct from that of the more disparate HIV-1 protease. The same functional ordering with respect to the human retroviral proteases was reflected in Ki values observed with a number of protease inhibitors. Thus, the folded synthetic SIV protease shows patterns of specificity and susceptibility to inhibition that are in accord with what would be expected based upon its degree of structural similarity to proteases from HIV-1 and HIV-2.
 ...
PMID:Chemical synthesis of a biotinylated derivative of the simian immunodeficiency virus protease. Purification by avidin affinity chromatography and autocatalytic activation. 158 12

The standard angiotensin I (Ang I) radioimmunoassay for renin activity determination is a useful clinical tool for the diagnosis of high renin levels in certain cases of hypertension. It depends upon the liberation of Ang I from human plasma angiotensinogen. We considered whether a commercially available synthetic tetradecapeptide (TDP), Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser, would produce authentic Ang I upon incubation with protease from human immunodeficiency virus type 1 (HIV-1). This peptide is also known to be cleaved by renin at the Leu-Leu bond to yield the decapeptide Ang I. When the TDP is incubated with the HIV-1 protease, the peptide is readily hydrolyzed. Product formation is linear with respect to time and enzyme concentration. HPLC analysis of reaction products showed two new peaks, as one would expect from the cleavage of a TDP into a decapeptide and a tetrapeptide. Amino acid analysis of HPLC-purified peaks confirmed that the HIV-1 protease cleaves TDP at the Leu10-Leu11 site to produce the desired decapeptide, Ang I. Production of Ang I by the HIV-1 protease, like human renin, is inhibited in the presence of a protease inhibitor. Implications of the discovery of an HIV-1 protease substrate that produces authentic Ang I are discussed in light of a screening assay for soluble HIV-1 protease inhibitors.
 ...
PMID:Could angiotensin I be produced from a renin substrate by the HIV-1 protease? 179 23

The peptidolytic reaction of HIV-1 protease has been investigated by using four oligopeptide substrates, Ac-Ser-Gln-Asn-Tyr-Pro-Val-Val-NH2, Ac-Arg-Ala-Ser-Gln-Asn-Tyr-Pro-Val-Val-NH2, Ac-Ser-Gln-Ser-Tyr-Pro-Val-Val-NH2, and Ac-Arg-Lys-Ile-Leu-Phe-Leu-Asp-Gly-NH2, that resemble two cleavage sites found within the naturally occurring polyprotein substrates Pr55gag and Pr160gag-pol. The values for the kinetic parameters V/KEt and V/Et were 0.16-7.5 mM-1 s-1 and 0.24-29 s-1, respectively, at pH 6.0, 0.2 M NaCl, and 37 degrees C. By use of a variety of inorganic salts, it was concluded that the peptidolytic reaction is nonspecifically activated by increasing ionic strength. V/K increased in an apparently parabolic fashion with increasing ionic strength, while V was either increased or decreased slightly. From product inhibition studies, the kinetic mechanism of the protease is either random or ordered uni-bi, depending on the substrate studied. The reverse reaction or a partial reverse reaction (as measured by isotope exchange of the carboxylic product into substrate) was negligible for most of the oligopeptide substrates, but the enzyme catalyzed the formation of Ac-Ser-Gln-Asn-Tyr-Phe-Leu-Asp-Gly-NH2 from the products Ac-Ser-Gln-Asn-Tyr and Phe-Leu-Asp-Gly-NH2. The protease-catalyzed exchange of an atom of 18O from H2 18O into the re-formed substrates occurred at a rate which was 0.01-0.12 times that of the forward peptidolytic reaction. The results of these studies are in accord with the formation of a kinetically competent enzyme-bound amide hydrate intermediate, the collapse of which is the rate-limiting chemical step in the reaction pathway.
 ...
PMID:Human immunodeficiency virus-1 protease. 1. Initial velocity studies and kinetic characterization of reaction intermediates by 18O isotope exchange. 188 30

The pH dependence of the peptidolytic reaction of recombinant human immunodeficiency virus type 1 protease has been examined over a pH range of 3-7 for four oligopeptide substrates and two competitive inhibitors. The pK values obtained from the pKis vs pH profiles for the unprotonated and protonated active-site aspartyl groups, Asp-25 and Asp-25', in the monoprotonated enzyme form were 3.1 and 5.2, respectively. Profiles of log V/K vs pH for all four substrates were "bell-shaped" in which the pK values for the unprotonated and protonated aspartyl residues were 3.4-3.7 and 5.5-6.5, respectively. Profiles of log V vs pH for these substrates were "wave-shaped" in which V was shifted to a constant lower value upon protonation of a residue of pK = 4.2-5.2. These results indicate that substrates bind only to a form of HIV-1 protease in which one of the two catalytic aspartyl residues is protonated. Solvent kinetic isotope effects were measured over a pH (D) range of 3-7 for two oligopeptide substrates, Ac-Arg-Ala-Ser-Gln-Asn-Tyr-Pro-Val-Val-NH2 and Ac-Ser-Gln-Asn-Tyr-Pro-Val-Val-NH2. The pH-independent value for DV/K was 1.0 for both substrates, and DV = 1.5-1.7 and 2.2-3.2 at low and high pH (D), respectively. The attentuation of both V and DV at low pH (D) is consistent with a change in rate-limiting step from a chemical one at high pH (D) to one in which a product release step or an enzyme isomerization step becomes partly rate-limiting at low pH (D). Proton inventory data is in accord with the concerted transfer of two protons in the transition state of a rate-limiting chemical step in which the enzyme-bound amide hydrate adduct collapses to form the carboxylic acid and amine products.
 ...
PMID:Human immunodeficiency virus-1 protease. 2. Use of pH rate studies and solvent kinetic isotope effects to elucidate details of chemical mechanism. 188 31

We have demonstrated the use of a radioimmunoassay to quantitate the peptidolytic activity of human immunodeficiency virus, type 1 (HIV-1) protease using a tetradecapeptide substrate of porcine renin, Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser. HIV-1 protease catalyzes cleavage of this substrate at the same Leu-Leu bond as does porcine renin, resulting in the formation of authentic angiotensin-I. The angiotensin-I product is then detected by use of a commercially available renin plasma assay kit, which constitutes the basis of the RIA. The radioimmunoassay provides detection of the protease-catalyzed formation of angiotensin-I at picomolar concentrations in vitro. We demonstrate the use of this assay in determining IC50 values for two HIV-1 protease inhibitors present in cell culture media and in standard assay buffer. An example of the potential development of this assay for the quantitation of these inhibitors present in ex vivo plasma samples is also presented.
 ...
PMID:Adaptation of the plasma renin radioimmunoassay for use with HIV-1 protease. 195 69

Purified HIV-1 protease hydrolyzes H-Ser-Gln-Asn-Leu-Phe(NO2)-Leu-Asp-Gly-NH2 (Peptide 1) and acetyl-Arg-Lys-Ile-Leu-Phe(NO2)-Leu-Asp-Gly-NH2 (Peptide 2) between the (p-nitro)phenylalanyl and leucyl residues. The cleavage of Peptides 1 and 2 resulted in a decrease in uv absorbance at 310 nm. The HIV-1 protease-catalyzed peptidolysis of Peptides 1 and 2 was characterized by a linear time course at substrate turnover of less than 20%. The solubilities of these substrates at pH 5.0 were sufficient to provide initial rate measurements over a concentration range of 0.05-0.5 mM. Steady-state kinetic data and inhibition constants using both spectrophotometric and high performance liquid chromatography (HPLC) analysis of the peptidolysis of these substrates resulted in comparable values.
 ...
PMID:Chromophoric peptide substrates for the spectrophotometric assay of HIV-1 protease. 218 99

The pepsin-like aspartyl proteases consist of a single polypeptide chain with topologically similar amino- and carboxyl-terminal domains, each of which contributes 1 aspartic acid residue to the active site. This structure has been proposed to have evolved by gene duplication and fusion from a dimeric enzyme composed of two identical polypeptide chains, such as the aspartyl protease (PRT) of human immunodeficiency virus type 1 (HIV-1). To determine if a single polypeptide form of the HIV-1 protease would be enzymatically active, two protease coding regions were linked to form a dimeric gene (pFGGP). Expression of this gene in Escherichia coli yielded a protein with the expected molecular mass of 22 kDa. The in vitro kinetic parameters of PRT and FGGP (where FGGP is the single polypeptide form of the HIV-1 protease with 2 glycine residues connecting the two subunits) for three peptide substrates are similar. Construction and analysis of a CheY-GAG-FGGP fusion protein demonstrated that FGGP is capable of precursor processing in vivo. Mutation of one or both of the active site aspartates to either asparagine or glutamate rendered the enzyme inactive, demonstrating that both active site aspartate residues are required for enzymatic activity.
 ...
PMID:Characterization of an active single polypeptide form of the human immunodeficiency virus type 1 protease. 221 28


1 2 3 4 5 6 7 8 9 Next >>