Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.4.23.16 (HIV-1 protease)
 2,107 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The importance of each side chain of a cross-linked interfacial peptide inhibitor of HIV-1 protease was evaluated using an alanine scanning approach. Whereas the parent inhibitor has an IC50 value of 350 nM, values for the mutations reported here range from 280-9200 nM. The relative importance or each residue was thus assigned and correlated to the solvent accessible surface area (SASA) exposed upon mutation.
 ...
PMID:Probing the role of interfacial residues in a dimerization inhibitor of HIV-1 protease. 1047 82

The crystal structure of an actual HIV-1 protease-substrate complex is presented at 2.0 A resolution (R-value of 19.7 % (R(free) 23.3 %)) between an inactive variant (D25N) of HIV-1 protease and a long substrate peptide, Lys-Ala-Arg-Val-Leu-Ala-Glu-Ala-Met-Ser, which covers a full binding epitope of capsid(CA)-p2, cleavage site. The substrate peptide is asymmetric in both size and charge distribution. To accommodate this asymmetry the two protease monomers adopt different conformations burying a total of 1038 A(2) of surface area at the protease-substrate interface. The specificity for the CA-p2 substrate peptide is mainly hydrophobic, as most of the hydrogen bonds are made with the backbone of the peptide substrate. Two water molecules bridge the two monomers through the loops Gly49-Gly52 (Gly49'-Gly52') and Pro79'-Val82' (Pro79-Val82). When other complexes are compared, the mobility of these loops is correlated with the content of the P1 and P1' sites. Interdependence of the conformational changes allows the protease to exhibit its wide range of substrate specificity.
 ...
PMID:How does a symmetric dimer recognize an asymmetric substrate? A substrate complex of HIV-1 protease. 1096 16

The active site cleft of the HIV-1 protease (PR) is bound by two identical conformationally mobile loops known as flaps, which are important for substrate binding and catalysis. The present article reports, for the first time, an HIV-1 PR inhibitor, ATBI, from an extremophilic Bacillus sp. The inhibitor is found to be a hydrophilic peptide with Mr of 1147, and an amino acid sequence of Ala-Gly-Lys-Lys-Asp-Asp-Asp-Asp-Pro-Pro-Glu. Sequence homology exhibited no similarity with the reported peptidic inhibitors of HIV-1 PR. Investigation of the kinetics of the enzyme-inhibitor interactions revealed that ATBI is a noncompetitive and tight binding inhibitor with the IC(50) and K(i) values 18.0 and 17.8 nm, respectively. The binding of the inhibitor with the enzyme and the subsequent induction of the localized conformational changes in the flap region of the HIV-1 PR were monitored by exploiting the intrinsic fluorescence of the surface exposed Trp-42 residues, which are present at the proximity of the flaps. We have demonstrated by fluorescence and circular dichroism studies that ATBI binds in the active site of the HIV-1 PR and thereby leads to the inactivation of the enzyme. Based on our results, we propose that the inactivation is due to the reorganization of the flaps impairing its flexibility leading toward inaccessibility of the substrate to the active site of the enzyme.
 ...
PMID:Interactions of a novel inhibitor from an extremophilic Bacillus sp. with HIV-1 protease: implications for the mechanism of inactivation. 1104 2

HIV-1 encodes an aspartic protease, an enzyme crucial to viral maturation and infectivity. It is responsible for the cleavage of various protein precursors into viral proteins. Inhibition of this enzyme prevents the formation of mature, infective viral particles and therefore, it is a potential target for therapeutic intervention following infection. Several drugs that inhibit the action of this enzyme have been discovered. These include peptidomimetic inhibitors such as ABT-538 and saquinavir, and structure based inhibitors such as indinavir and nelfinavir. Several of these have been tested in human clinical trials and have demonstrated significant reduction in viral load. However, most of them have been found to be of limited clinical utility because of their poor pharmacological properties and also because the viral protease becomes rapidly resistant to these drugs on account of mutations in the enzyme. One way to overcome these limitations is to design an inhibitor that interacts mainly with the conserved residues of HIV-1 protease. By a rational drug design approach based on the high resolution X-ray crystal structure of the HIV-1 protease with--MVT 101 (a substrate based inhibitor) and the specific design principles of peptides containing dehydro-Alanine (delta Ala) derived from our earlier studies, we have designed a tetrapeptide with the sequence: NH2-Thr-delta Ala-delta Ala-Gln-COOH. Energy minimization and molecular modelling of the interaction of the designed tetrapeptide with the inhibitor binding site indicate that the inhibitor is in an extended conformation and makes excessive contacts with the viral enzyme at the interface between the protein subunits. The designed inhibitor has 33% of its interaction with the conserved region of HIV-1 protease which is of the same order as that of MVT 101 with the enzyme.
 ...
PMID:A peptide inhibitor of HIV-1 protease using alpha, beta- dehydro residues: a structure based computer model. 1156 39

Resistance to human immunodeficiency virus type 1 protease (HIV PR) inhibitors results primarily from the selection of multiple mutations in the protease region. Because many of these mutations are selected for the ability to decrease inhibitor binding in the active site, they also affect substrate binding and potentially substrate specificity. This work investigates the substrate specificity of a panel of clinically derived protease inhibitor-resistant HIV PR variants. To compare protease specificity, we have used positional-scanning, synthetic combinatorial peptide libraries as well as a select number of individual substrates. The subsite preferences of wild-type HIV PR determined by using the substrate libraries are consistent with prior reports, validating the use of these libraries to compare specificity among a panel of HIV PR variants. Five out of seven protease variants demonstrated subtle differences in specificity that may have significant impacts on their abilities to function in viral maturation. Of these, four variants demonstrated up to fourfold changes in the preference for valine relative to alanine at position P2 when tested on individual peptide substrates. This change correlated with a common mutation in the viral NC/p1 cleavage site. These mutations may represent a mechanism by which severely compromised, drug-resistant viral strains can increase fitness levels. Understanding the altered substrate specificity of drug-resistant HIV PR should be valuable in the design of future generations of protease inhibitors as well as in elucidating the molecular basis of regulation of proteolysis in HIV.
 ...
PMID:Altered substrate specificity of drug-resistant human immunodeficiency virus type 1 protease. 1177 10

Because, in vivo, the HIV-1 PR ( HIV-1 protease) present a high mutation rate we performed a comparative study of the energetic behaviors of the wild type HIV-1 PR and four type of mutants: Val82/Asn; Val82/Asp; Gln7/Lys, Leu33/Ile, Leu63/Ile; Ala71/Thr, Val82/Ala. We suggest that the energetic fluctuation (electrostatic, van der Waals and torsion energy) of the mutants and the solvent accessible surface (SAS) values can be useful to explain the viral resistance process developed by HIV-1 PR. The number and localization of enzyme mutations induce important modifications of the van der Waals and torsional energy, while the electrostatic energy has an insignificant fluctuation. We showed that the viral resistance can be explored if the solvent accessible surfaces of the active site for the mutant structures are calculated. In this paper we have obtained the solvent accessible surface for a group of 15 mutants (11 mutants obtained by Protein Data Bank (PDB) file, 4 mutants modeled by CHARMM software) and for the wild type HIV-1 PR). Our study try to show that the number and localization of the mutations are factors which induce the HIV-1 PR viral resistance. The larger solvent accessible surface could be recorded for the point mutant Val 82/Phe.
 ...
PMID:Comparative study of some energetic and steric parameters of the wild type and mutants HIV-1 protease: a way to explain the viral resistance. 1216 10

Folding studies on proteases by the conventional hydrogen exchange experiments are severely hampered because of interference from the autolytic reaction in the interpretation of the exchange data. We report here NMR identification of the hierarchy of early conformational transitions (folding propensities) in HIV-1 protease by systematic monitoring of the changes in the state of the protein as it is subjected to different degrees of denaturation by guanidine hydrochloride. Secondary chemical shifts, HN-Halpha coupling constants, 1H-15N nuclear Overhauser effects, and 15N transverse relaxation parameters have been used to report on the residual structural propensities, motional restrictions, conformational transitions, etc., and the data suggest that even under the strongest denaturing conditions (6 m guanidine) hydrophobic clusters as well as different native and non-native secondary structural elements are transiently formed. These constitute the folding nuclei, which include residues spanning the active site, the hinge region, and the dimerization domain. Interestingly, the proline residues influence the structural propensities, and the small amino acids, Gly and Ala, enhance the flexibility of the protein. On reducing the denaturing conditions, partially folded forms appear. The residues showing high folding propensities are contiguous along the sequence at many locations or are in close proximity on the native protein structure, suggesting a certain degree of local cooperativity in the conformational transitions. The dimerization domain, the flaps, and their hinges seem to exhibit the highest folding propensities. The data suggest that even the early folding events may involve many states near the surface of the folding funnel.
 ...
PMID:NMR elucidation of early folding hierarchy in HIV-1 protease. 1264 64

Maturation of human immunodeficiency virus (HIV) depends on the processing of Gag and Pol polyproteins by the viral protease, making this enzyme a prime target for anti-HIV therapy. Among the protease substrates, the nucleocapsid-p1 (NC-p1) sequence is the least homologous, and its cleavage is the rate-determining step in viral maturation. In the other substrates of HIV-1 protease, P1 is usually either a hydrophobic or an aromatic residue, and P2 is usually a branched residue. NC-p1, however, contains Asn at P1 and Ala at P2. In response to the V82A drug-resistant protease mutation, the P2 alanine of NC-p1 mutates to valine (AP2V). To provide a structural rationale for HIV-1 protease binding to the NC-p1 cleavage site, we solved the crystal structures of inactive (D25N) WT and V82A HIV-1 proteases in complex with their respective WT and AP2V mutant NC-p1 substrates. Overall, the WT NC-p1 peptide binds HIV-1 protease less optimally than the AP2V mutant, as indicated by the presence of fewer hydrogen bonds and fewer van der Waals contacts. AlaP2 does not fill the P2 pocket completely; PheP1' makes van der Waals interactions with Val82 that are lost with the V82A protease mutation. This loss is compensated by the AP2V mutation, which reorients the peptide to a conformation more similar to that observed in other substrate-protease complexes. Thus, the mutant substrate not only binds the mutant protease more optimally but also reveals the interdependency between the P1' and P2 substrate sites. This structural interdependency results from coevolution of the substrate with the viral protease.
 ...
PMID:Structural basis for coevolution of a human immunodeficiency virus type 1 nucleocapsid-p1 cleavage site with a V82A drug-resistant mutation in viral protease. 1550 31

HIV-1 protease is an effective target for the design of drugs against AIDS. To help this process of drug design, three-dimensional structures have been determined of complexes between HIV-1 protease and a variety of transition-state analogue inhibitors. The true transition state, however, has not been structurally characterized. The crystal structure of the C95M/C1095A HIV-1 protease tethered dimer shows a distinctive feature in which the two flaps of the enzyme are in a 'closed conformation' even in the unliganded state. This unique feature has been utilized here to study the structure of HIV-1 protease complexed to an oligopeptide substrate of amino acid sequence His-Lys-Ala-Arg-Val-Leu*NPhe-Glu-Ala-Nle-Ser (where * denotes the cleavage site, and NPhe and Nle denote p-nitrophenylalanine and norleucine residues respectively). The X-ray structure of the complex refined against 2.03 A (0.203 nm) resolution synchrotron data shows that the substrate is trapped as a tetrahedral reaction intermediate in the crystal. The hydrogen-bonding interactions between the reaction intermediate and the catalytic aspartates are different from those observed previously using transition-state analogues. The reaction intermediate did not dissociate to release the products, possibly due to the inflexibility introduced in the flaps when the enzyme is packed inside crystals.
 ...
PMID:Observation of a tetrahedral reaction intermediate in the HIV-1 protease-substrate complex. 1579 43

We have identified a rare HIV-1 protease (PR) mutation, I47A, associated with a high level of resistance to the protease inhibitor lopinavir (LPV) and with hypersusceptibility to the protease inhibitor saquinavir (SQV). The I47A mutation was found in 99 of 112,198 clinical specimens genotyped after LPV became available in late 2000, but in none of 24,426 clinical samples genotyped from 1998 to October 2000. Phenotypic data obtained for five I47A mutants showed unexpected resistance to LPV (86- to >110-fold) and hypersusceptibility to SQV (0.1- to 0.7-fold). Molecular modeling and energy calculations for these mutants using our structural phenotyping methodology showed an increase in the binding energy of LPV by 1.9-3.1 kcal/mol with respect to the wild type complex, corresponding to a 20- to >100-fold decrease in binding affinity, consistent with the observed high levels of LPV resistance. In the WT PR-LPV complex, the Ile 47 side chain is positioned close to the phenoxyacetyl moiety of LPV and its van der Waals interactions contribute significantly to the ligand binding. These interactions are lost for the smaller Ala 47 residue. Calculated binding energy changes for SQV ranged from -0.4 to -1.2 kcal/mol. In the mutant I47A PR-SQV complexes, the PR flaps are packed more tightly around SQV than in the WT complex, resulting in the formation of additional hydrogen bonds that increase binding affinity of SQV consistent with phenotypic hypersusceptibility. The emergence of mutations at PR residue 47 strongly correlates with increasing prescriptions of LPV (Spearman correlation r(s) = 0.96, P < .0001).
 ...
PMID:Structural analysis of an HIV-1 protease I47A mutant resistant to the protease inhibitor lopinavir. 1593 77


<< Previous 1 2 3 4 5 6 Next >>