Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.2.1.17 (lysozyme)
 21,489 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The objective of this study was designed to extend the application of poly(epsilon-caprolactone) (PCL) in delivery of macromolecular proteins. The strategy applied here is to create a porous structure in PCL films in order to control the diffusion rate of protein. Various amounts of both high-molecular-weight and low-molecular-weight poly(ethylene glycol) (PEG) were used as pore-forming agents. The porous films were prepared by a solvent-casting-leaching method. The thicknesses of the prepared films were controlled to be in the range of 75.3 +/- 0.6 similar 81.7 +/- 0.6 mum. The pore fraction of films was determined to be 27.7 +/- 1.0% similar 52.5 +/- 0.8% for PEG(10000) and 26.6 +/- 1.8% similar 48.8 +/- 1.4% for PEG(4000). The pore fraction initially increased with increasing amounts of PEG, independent of the molecular weight of PEG. In the permeation study, lysozyme was used as a model diffuser. The permeation rate of protein increased as the pore fraction of films increased, especially when 30 similar 40% of PEG was added initially, and this phenomenon was more prominent when low-molecular-weight PEG was used. This result was probably due to the highly porous structure creating interconnected channels in the films, further enhancing protein diffusion. In addition, the size of micropores formed by PEG(4000) was observed to be larger than by PEG(10000), which also accounted for faster permeation rate of lysozyme through PCL-PEG(4000) porous films.
 ...
PMID:Permeation of protein from porous poly(epsilon-caprolactone) films. 1187 Jun 57

A one-step, mild procedure based on coaxial electrospinning was developed for incorporation and controlled release of two model proteins, BSA and lysozyme, from biodegradable core-shell nanofibers with PCL as shell and protein-containing PEG as core. The thickness of the core and shell could be adjusted by the feed rate of the inner dope, which in turn affected the release profiles of the incorporated proteins. It was revealed that the released lysozyme maintained its structure and bioactivity. The current method may find wide applications for controlled release of proteins and tissue engineering.
 ...
PMID:A facile technique to prepare biodegradable coaxial electrospun nanofibers for controlled release of bioactive agents. 1615 37

Poly(epsilon-caprolactone) (PCL)/chitin and PCL/chitosan blend films with compositional gradients were successfully fabricated by a dissolution/diffusion method; that is, repeatedly pouring the PCL/chitin (or PCL/chitosan) blend solutions, with variable composition, onto polysaccharide layers. The compositional gradient structure in the resulting films was characterized by polarized optic microscopy, ATR-FT-IR and trans-FT-IR microscopic spectroscopy. Enzymatic degradability of the PCL/chitin and PCL/chitosan blend films with compositional gradients in the presence of lysozyme was compared with those of homogeneous films and two-layer films. It was found that the degradation rate of PCL/chitin blend films with a compositional gradient was far lower than that of the neat chitin film, whereas the degradation rate of PCL/chitosan blend films with a compositional gradient was close to that of the neat chitosan film. The suppression of the chitosan crystallization, which accelerates the enzymatic degradation, at the surface of PCL/chitosan films with a compositional gradient was much more severe than that for PCL/chitin films with a compositional gradient.
 ...
PMID:Poly(epsilon-caprolactone)/chitin and poly(epsilon-caprolactone)/chitosan blend films with compositional gradients: fabrication and their biodegradability. 1653 61

Chitosan is a well sought-after polysaccharide in biomedical applications and has been blended with various macromolecules to mitigate undesirable properties. However, the effects of blending on the unique antibacterial activity of chitosan as well as changes in fatigue and degradation properties are not well understood. The aim of this work was to evaluate the anti-bacterial properties and changes in physicochemical properties of chitosan upon blending with synthetic polyester poly(epsilon-caprolactone) (PCL). Chitosan and PCL were homogeneously dissolved in varying mass ratios in a unique 77% acetic acid in water mixture and processed into uniform membranes. When subjected to uniaxial cyclical loading in wet conditions, these membranes sustained 10 cycles of predetermined loads up to 1 MPa without break. Chitosan was anti-adhesive to Gram-positive Streptococcus mutans and Gram-negative Actinobacillus actinomycetemcomitans bacteria. Presence of PCL compromised the antibacterial property of chitosan. Four-week degradation studies in PBS/lysozyme at 37 degrees C showed initial weight loss due to chitosan after which no significant changes were observed. Molecular interactions between chitosan and PCL were investigated using Fourier transform infrared spectroscopy (FTIR) which showed no chemical bond formations in the prepared blends. Investigation by wide-angle X-ray diffraction (WAXD) indicated that the crystal structure of individual polymers was unchanged in the blends. Dynamic mechanical and thermal analysis (DMTA) indicated that the crystallinity of PCL was suppressed and its storage modulus increased with the addition of chitosan. Analysis of surface topography by atomic force microscopy (AFM) showed a significant increase in roughness of all blends relative to chitosan. Observed differences in biological and anti-bacterial properties of blends could be primarily attributed to surface topographical changes.
 ...
PMID:Blending chitosan with polycaprolactone: effects on physicochemical and antibacterial properties. 1660 30

A blend mixture of biodegradable poly(epsilon-caprolactone) (PCL) and poly(d,l-lactic-co-glycolic acid)-poly(ethylene glycol)-NH(2) (PLGA-b-PEG-NH(2)) block copolymer was electrospun to produce surface functionalized nanofibers. The resulting nanofibrous mesh with primary amine groups on the surface was applied for immobilization of biologically active molecules using lysozyme as a model enzyme. Lysozyme was immobilized via covalent conjugation by using a homobifunctional coupling agent. The nanofibrous mesh could immobilize a far greater amount of lysozyme on the surface with concomitantly increased activity, primarily due to its larger surface area, compared to that of the solvent casting film. It was also found that the enzyme immobilization process slightly altered thermal and pH-dependent catalytic activity profiles compared to those of native lysozyme. The results demonstrated the surface functionalized electrospun nanofibrous mesh could be used as a promising material for immobilizing a wide range of bioactive molecules.
 ...
PMID:Surface functionalized electrospun biodegradable nanofibers for immobilization of bioactive molecules. 1688 87

A blend mixture of poly(epsilon-caprolactone) (PCL) and poly(ethylene oxide) (PEO) was electrospun to produce fibrous meshes that could release a protein drug in a controlled manner. Various biodegradable polymers, such as poly(l-lactic acid) (PLLA), poly(epsilon-caprolactone) (PCL), and poly(d,l-lactic-co-glycolic acid) (PLGA) were dissolved, along with PEO and lysozyme, in a mixture of chloroform and dimethylsulfoxide (DMSO). The mixture was electrospun to produce lysozyme loaded fibrous meshes. Among the polymers, the PCL/PEO blend meshes showed good morphological stability upon incubation in the buffer solution, resulting in controlled release of lysozyme over an extended period with reduced initial bursts. With varying the PCL/PEO blending ratio, the release rate of lysozyme from the corresponding meshes could be readily modulated. The lysozyme release was facilitated by increasing the amount of PEO, indicating that entrapped lysozyme was mainly released out by controlled dissolution of PEO from the blend meshes. Lysozyme released from the electrospun fibers retained sufficient catalytic activity.
 ...
PMID:Controlled protein release from electrospun biodegradable fiber mesh composed of poly(epsilon-caprolactone) and poly(ethylene oxide). 1732 Oct 84

In this study, the concept of hydrophobic ion pairing was adopted for incorporating lysozyme into electrospun poly(epsilon-caprolactone) (PCL)/poly(ethylene glycol) (PEG) non-woven membranes. The solubility of lysozyme in organic solvent was enhanced through the formation of lysozyme-oleate complexes, which could be directly loaded into PCL/PEG membranes using electrospinning technique. The resultant PCL/PEG nanofibers have a compact structure with an average diameter ranged from about 0.4 microm to 0.9 microm. The addition of PEG into the PCL nanofibers not only improved the hydrophilicity of the membrane, but also played an important role on in vitro lysozyme release rate. It was found that the release rate of lysozyme was enhanced with the increase of PEG content. In addition, the increase of salt concentration in the release medium accelerated lysozyme release. It has also been shown that the released lysozyme retained most of its enzymatic activity.
 ...
PMID:Encapsulation and controlled release of lysozyme from electrospun poly(epsilon-caprolactone)/poly(ethylene glycol) non-woven membranes by formation of lysozyme-oleate complexes. 1766 13

Chitosan is a well sought-after polysaccharide in biomedical applications due to its biocompatibility, biodegradability to non-toxic substances, and ease of fabrication into various configurations. However, alterations in the anti-bacterial properties of chitosan in various forms is not completely understood. The objective of this study was to evaluate the anti-bacterial properties of chitosan matrices in different configurations against two pathogens-Gram-positive Streptococcus mutans and Gram-negative Actinobacillus actinomycetemcomitans. Two-dimensional (2-D) membranes and three-dimensional (3-D) porous scaffolds were synthesized by air drying and controlled-rate freeze drying. Matrices were suspended in bacterial broths with or without lysozyme (enzyme that degrades chitosan). Influences of pore size, blending with Polycaprolactone (PCL, a synthetic polymer), and neutralization process on bacterial proliferation were studied. Transient changes in optical density of the broth, adhesion characteristics, viability, and contact-dependent bacterial activity were assessed. 3-D porous scaffolds were more effective in reducing the proliferation of S. mutans in suspension than 2-D membranes. However, no significant differences were observed on the proliferation of A. actinomycetemcomitans. Presence of lysozyme significantly increased the antibacterial activity of chitosan against A. actinomycetemcomitans. Pore size did not affect the proliferation kinetics of either species, with or without lysozyme. NaOH neutralization of chitosan increased bacterial adhesion whereas ethanol neutralization inhibited adhesion without lowering proliferation. Mat culture tests indicated that chitosan does not allow proliferation on its surface and it loses antibacterial activity upon blending with PCL. Results suggest that the chemical and structural characteristics of chitosan-based matrices can be manipulated to influence the interaction of different bacterial species.
 ...
PMID:Antibacterial activity of chitosan-based matrices on oral pathogens. 1770 12

An efficient living ring-opening polymerization (ROP) of a permethoxylated epsilon-caprolactone [(OMe)CL] catalyzed by yttrium(III) isopropoxide was developed for the synthesis of degradable protein-resistant polymers [P(OMe)CL]. The lactone monomer was efficiently prepared from a reduced sugar, D-dulcitol. Kinetic studies of the ROP revealed a linear dependence of ln[M]0/[M] on polymerization time as well as a linear correlation between the number-averaged molecular weight (M(n)) and monomer conversion; both support it is a living polymerization. A series of block copolymers of our permethoxylated lactone with epsilon-caprolactone [P(OMe)CL-b-PCL] were synthesized and fully characterized. In thermal analyses only single T(g)s were observed in all the block copolymers, suggesting that P(OMe)CL and PCL blocks are fully miscible. Finally, surface plasmon resonance (SPR) sensograms demonstrated that both P(OMe)CL and the P(OMe)CL-b-PCL block copolymers exhibit excellent resistance to fibrinogen and lysozyme.
 ...
PMID:Living ring-opening polymerization of a carbohydrate-derived lactone for the synthesis of protein-resistant biomaterials. 1822 Mar 47

Nerve guides are cylindrical conduits of either biologically based or synthetic materials that are used to bridge nerve defects. While it is well known that a critical aspect of nerve regeneration is the delivery of oxygen and nutrients to the surviving nerve tissue, several guide parameters that determine the permeability of nerve guides to nutrients are often overlooked. We have reproducibly manufactured poly(caprolactone) (PCL) nerve guides of tailored porosity percentage, wall thickness and pore diameter through a dip-coating/salt-leaching technique. In this study, these three parameters were varied to measure the response of glucose and lysozyme diffusion through the guide wall. In addition, nerve guide permeability following protein fouling studies was examined. Based on the results from this study, it was determined that at high porosity percentages (80%), decreasing the pore diameter (10-38microm) was a measurable method of decreasing the lysozyme permeability of PCL nerve guides while not creating a loss of glucose permeability. PCL fouling studies were used to fine-tune the desirable nerve guide wall thickness. Results indicated that nerve guides 0.6mm thick decreased the loss of lysozyme to almost 10% without significantly diminishing glucose (nutrient) permeability. These results will be utilized to optimize nerve guide parameters for future in vivo applications.
 ...
PMID:Diffusion of soluble factors through degradable polymer nerve guides: Controlling manufacturing parameters. 1936 23


1 2 Next >>