Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:3.2.1.17 (lysozyme)
21,489 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Increases in phenylalanine ammonia lyase activity and pisatin synthesis were induced in excised pea pods (a) by basic polypeptides such as protamine, histone, lysozyme, cytochrome c, and ribonuclease; (b) by the polyamines spermine, spermidine, cadaverine, and putrescine, and (c) by the synthetic oligopeptides poly-l-lysine, poly-dl-ornithine, and poly-l-arginine.Poly-l-lysine (1 milligram per milliliter, molecular weight 7,200) was utilized as a model inducer of pisatin and phenylalanine ammonia lyase. The poly-l-lysine-induced responses could be inhibited by adding the RNA synthesis inhibitors cordycepin or alpha-amanitin to the pods prior to or at the time of inducer application. Cordycepin added 1.5 hours after inducer no longer completely inhibited induction. The application of poly-l-lysine was shown to characteristically change the rate of RNA synthesis within 30 minutes. Ultrastructural changes in pea nuclei were detected within 3 hours, and gross changes in nuclear morphology were apparent at 14 hours after inducer application. The physical appearance of uranyl acetate-stained chromatin isolated from poly-l-lysine 2 hours after inducer application differed from that of water-treated tissues. The template properties of chromatin extracted from pods 3 hours after inducer application were consistently superior to control chromatin when assayed with Escherichia coli RNA polymerase (without sigma factor). Chromatin from poly-l-lysine-induced tissue also bound 49% more actinomycin D-(3)H.The DNA-complexing properties of inducer compounds and the induced changes in the template and dye-binding properties of pea chromatin formed the basis for a proposed mode of action for phytoalexin induction.
...
PMID:Mode of Pisatin Induction: Increased Template Activity and Dye-binding Capacity of Chromatin Isolated from Polypeptide-treated Pea Pods. 1665 52

A disulfide-carrying random telomer with pendent D-glucosylurea groups (Cys-poly(glucosylureaethyl methacrylate-r-ureaethyl methacrylate), Cys-Poly(GUMA-r-UMA)) was obtained by UV-irradiation of GUMA and UMA in the presence of benzyl N,N-diethyldithiocarbamoyl (BDC) derivative which shows the abilities of initiation, transfer, and termination (iniferter). The disulfide-carrying telomer was accumulated on a gold electrode and colloidal gold-immobilized glass substrate, and the binding of various proteins to the surface of the polymer brush was examined by both cyclic voltammetry (CV) with hydroquinone as a probe, and localized surface plasmon resonance (LSPR) absorption method. The Cys-Poly(GUMA-r-UMA) brush did not show a significant non-specific adsorption of proteins such as bovine serum albumin and egg white lysozyme. Furthermore, sugar binding proteins, concanavalin A (with an affinity for mannose and glucose) and wheat germ agglutinin (with an affinity for N-acetylglucosamine), were only slightly adsorbed to the GUMA-carrying brush, which is in contrast with the prompt and distinct binding of these proteins to the brushes composed of 2-methacryloyloxyethyl D-glucopyranoside and 1-(6'-methacrylamido)hexyl-2-N-acetoamido-2-deoxy-D-glucopyranoside, respectively. The glucosylurea group-carrying telomer brush prepared here might be useful to provide a "bio-inert" surface in bio-medical fields.
...
PMID:Resistance of surface-confined telomers with pendent glucosylurea groups against non-specific adsorption of proteins. 1696 44

Herein we report a new strategy for protein refolding by taking advantage of the unique surface and pore characteristics of ethylene-bridged periodic mesoporous organosilica (PMO), which can effectively entrap unfolded proteins and assist refolding by controlled release into the refolding buffer. Hen egg white lysozyme was used as a model protein to demonstrate the new method of protein refolding. Through loading of denatured proteins inside uniform mesoporous channels tailored to accommodate individual protein, protein aggregation was minimized, and the folding rate was increased. Poly(ethyleneglycol) (PEG)-triggered continuous release of entrapped denatured lysozyme allowed high-yield refolding with high cumulative protein concentrations. The new method enhances the oxidative refolding of lysozyme (e.g., over 80% refolding yield at about 0.6 mg/mL).
...
PMID:Protein refolding assisted by periodic mesoporous organosilicas. 1740 59

The chemical composition of the surface of anionic PLG microparticles before and after adsorption of vaccine antigens was measured using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The interfacial distributions of components will reflect underlying interactions that govern properties such as adsorption, release, and stability of proteins in microparticle vaccine delivery systems. Poly(lactide-co-glycolide) microparticles were prepared by a w/o/w emulsification method in the presence of the anionic surfactant dioctyl sodium sulfosuccinate (DSS). Ovalbumin, lysozyme, a recombinant HIV envelope glyocoprotein and a Neisseria meningitidis B protein were adsorbed to the PLG microparticles, with XPS and time-of-flight secondary mass used to analyze elemental and molecular distributions of components of the surface of lyophilized products. Protein (antigen) binding to PLG microparticles was measured directly by distinct elemental and molecular spectroscopic signatures consistent with amino acids and excipient species. The surface sensitive composition of proteins also included counter ions that support the importance of electrostatic interactions being crucial in the mechanism of adsorptions. The protein binding capacity was consistent with the available surface area and the interpretation of previous electron and atomic force microscope images strengthened by the quantification possible by XPS and the qualitative identification possible with TOF-SIMS. Protein antigens were detected and quantified on the surface of anionic PLG microparticles with varying degrees of efficiency under different adsorption conditions such as surfactant level, pH, and ionic strength. Observable changes in elemental and molecular composition suggest an efficient electrostatic interaction creating a composite surface layer that mediates antigen binding and release.
...
PMID:Characterization of antigens adsorbed to anionic PLG microparticles by XPS and TOF-SIMS. 1772 59

A straightforward approach to generate a stable and protein-resistant poly(dimethylsiloxane) (PDMS) surface using self-assembled hydrophilic polymers is demonstrated in this work. Epoxy-modified polymers were directly adsorbed from aqueous solution onto plasma oxidized PDMS based on H-bond interaction, and epoxies of polymer and silanols on oxidized PDMS surface were crosslinked by heating at 110 degrees C. The coating process could be completed within half hour. Poly(dimethylacrylamide-co-glycidyl methacrylate) (PDMA-co-GMA), poly(vinyl pyrrolidone)-g-glycidyl methacrylate (PVP-g-GMA) and poly(vinyl alcohol)-g-glycidyl methacrylate (PVA-g-GMA) (D. P. Wu, B. X. Zhao, Z. P. Dai, J. H. Qin and B. C. Lin, Lab Chip, 2006, 6, 942) were employed as examples here. Unlike PDMA, PVP, and PVA themselves, these epoxy-modified hydrophilic polymers could be directly used as static surface coatings on oxidized PDMS, and inhibited electroosmotic flow (EOF) within pH 3-11. It was also found that hard baking of PDMS at 150 degrees C for 24 hours before surface coating could greatly retard surface hydrophobicity recovery after oxygen plasma exposure, which strengthened epoxy-modified polymer coatings on oxidized PDMS surface, and resulted in EOF less than 0.2 x 10(-4) cm(2) V(-1) s(-1) (pH 9.0) within two weeks. On epoxy-modified polymer coated PDMS microchips, basic proteins, peptides and DNA fragments could be separated satisfactorily, in which more than 2 x 10(4) plates per 2 cm and less than 3% RSD (>8 runs) for migration time were obtained for lysozyme.
...
PMID:Self-assembled epoxy-modified polymer coating on a poly(dimethylsiloxane) microchip for EOF inhibition and biopolymers separation. 1796 Feb 76

Novel polyelectrolyte multilayer (PEM) coatings for enhanced protein separations in open tubular CEC (OT-CEC) are reported. Use of four cationic polymers (poly-L-lysine, poly-L-ornithine, poly-L-lysine-serine, and poly-L-glutamic acid-lysine), and three anionic molecular micelles, sodium poly(N-undecanoyl-L-leucyl-alaninate) (poly-L-SULA), sodium poly(N-undecanoyl-L-leucyl-valinate) (poly-L-SULV), and sodium poly(undecylenic sulfate) (poly-SUS) were investigated in PEM coatings for protein separations. The simultaneous effects of cationic polymer concentration, number of bilayers, temperature, applied voltage, and pH of the BGE on the separation of four basic proteins (alpha-chymotrypsinogen A, lysozyme, ribonuclease A, and cytochrome c) were analyzed using a Box Behnken experimental design. The influence of NaCl on the run-to-run reproducibility was investigated for PEM coatings containing each cationic polymer. All coatings exhibited excellent reproducibilities with a %RSD of the EOF less than 1% in the presence of NaCl. Optimal conditions were dependent on both the cationic and anionic polymers used in the PEM coatings. Poly-L-glutamic acid-lysine produced the highest resolution and longest migration time. The use of molecular micelles to form PEM coatings resulted in better separations than single cationic coatings. Chiral poly-L-SULA and poly-L-SULV resulted in higher protein resolutions as compared to the achiral, poly-SUS. Furthermore, the use of poly-L-SULV reversed the elution order of lysozyme and cytochrome c when compared to poly-L-SULA and poly-SUS.
...
PMID:Protein separations using polyelectrolyte multilayer coatings with molecular micelles in open tubular capillary electrochromatography. 1821 48

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) was investigated for possible application in repairing damaged nerves. Porous nerve conduits with both uniform wall porosity and non-uniform wall porosity were prepared using a particle leaching method. Adult Sprague-Dawley (SD) rats weighing 200-250 g were used as the animal model. The conduits were employed to bridge the 10mm defects in the sciatic nerve of the Sprague-Dawley (SD) rats. Mechanical tests showed that the PHBHHx nerve conduits had proper mechanical properties including maximal loads of 3.1N and 1.3N for the conduits with non-uniform wall porosity and with uniform wall porosity, respectively, and maximal stresses of 2.3 MPa and 0.94 MPa for the conduits with non-uniform wall porosity and with uniform wall porosity, respectively. At the same time, both types of conduits were permeable to three compounds tested including glucose, lysozyme and bovine serum albumin, indicating the suitability of the conduits for free exchanges of nutrients. Compound Muscle Action Potentials (CMAPs) were clearly observed in both types of the PHBHHx nerve conduits after 1 month of implantation, indicating a rapid functional recovery for the disrupted nerves. The results of histological sections demonstrated that the internal sides of the conduits with non-uniform wall porosity were compact enough to prevent the connective tissues from ingrowth penetration. After implantation for 3 months in the rats, the conduits with uniform wall porosity and those with non-uniform wall porosity lost 24% and 20% of their original weight average molecular weights, respectively. Combined with the strong mechanical properties, good nerve regeneration ability and non-toxicity of its degradation products, PHBHHx nerve conduits can be developed into a useful material to repair nerve damage.
...
PMID:Evaluation of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) conduits for peripheral nerve regeneration. 1884 69

We report a new process of making highly-porous large polymeric microparticles for local drug delivery to the lungs by inhalation. Poly(lactic-co-glycolic acid) (PLGA) microparticles (average diameter, 10-20 microm) were made by the double-emulsion method. To impart favorable aerodynamic properties, an effervescent salt ammonium bicarbonate (ABC) was included in the internal aqueous phase. ABC produced highly-porous structures in the PLGA particles as it escaped as ammonia and carbon dioxide. The fine-particle fraction (FPF) of the microparticles increased as a function of the ratio of ABC to PLGA. Microparticles prepared with 7.5%w/w (ABC/PLGA) had a mass median aerodynamic diameter (MMAD) of 4.0 +/- 1.2 microm and FPF of 32.0 +/- 9.1% when tested with Anderson Cascade Impactor (ACI) and Rotahaler. The highly-porous large particles deposited at the ACI stages corresponding to the trachea and below. The highly-porous large particles avoided phagocytosis by macrophages, while non-porous small particles were quickly taken up by the macrophages. Unlike other encapsulation methods which employ osmogens or extractable porogens, this method could encapsulate lysozyme and doxorubicin.HCl, with high encapsulation efficiency ( approximately 100% for both lysozyme and doxorubicin), in the PLGA microparticles characterized by desirable MMAD (4.5 +/- 0.6 microm lysozyme; 4.6 +/- 0.4 microm doxorubicin) and FPF (29.1 +/- 12.2% lysozyme; 33.8+/-3.6% doxorubicin). Fifty-two percent of encapsulated doxorubicin was released over 4 days from the highly-porous microparticles. This method is an efficient way of making polymeric microparticles for sustained local drug delivery by inhalation.
...
PMID:Development of highly porous large PLGA microparticles for pulmonary drug delivery. 1913 45

Nonspecific adsorption of proteins is a crucial problem in the detection of analytes in complex biological media by affinity sensors operating with label-free detection. We modified the gold surface of surface plasmon resonance (SPR) sensors with three types of promising antifouling coatings: self-assembled monolayers (SAM)s of alkanethiolates terminated with diethylene glycol and carboxylic groups, poly(ethylene glycol) (PEG) grafted onto the SAMs, and zwitterionic polymer brushes of poly(carboxybetaine methacrylate), poly(sulfobetaine methacrylate), and poly(phosphorylcholine methacrylate). Using SPR, we compared the efficacy of the coatings to reduce nonspecific adsorption from human blood plasma and from single-protein solutions of human serum albumin, immunoglobulin G, fibrinogen, and lysozyme. There was no direct relationship between values of water contact angles and plasma deposition on the coated surfaces. A rather high plasma deposition on SAMs was decreased by grafting PEG chains. Fouling on PEG was observed only from plasma fractions containing proteins with molecular mass higher than 350 000 Da. The adsorption kinetics from plasma collected from different healthy donors differed. Poly(carboxybetaine methacrylate) completely prevented the deposition from plasma, but the other more hydrophilic zwitterionic polymers prevented single-protein adsorption but did not prevent plasma deposition. The results suggest that neither wettability nor adsorption of the main plasma proteins was the main indicator of deposition from blood plasma.
...
PMID:Interaction of blood plasma with antifouling surfaces. 1940 3

In this study, microchip free flow planar RP electrochromatography (microFF-PRPEC) was developed by in situ polymerization of monolithic materials in microchamber, and successfully applied for the separation of dyes and proteins. Poly(butyle methyacrylate-co-ethylene dimethacrylate) was prepared by UV-initiated polymerization in a glass microchamber (42 mm long, 23 mm wide, and 28 microm deep). A mixture of 1-propanol, 1,4-butanediol, and water was chosen as porogens, and 1.2% (wt%) 2-acrylamide-2-methyl-propanesulfonic acid (AMPS) was added into the polymerization solution to generate EOF. With 30% v/v ACN-15 mM Tris-HCl as the mobile phase, rhodamine B and methyl green were separated from each other with 400 V transverse voltage applied, and resolution as high as 4.6 was obtained, much higher than that obtained by microFFE under optimal conditions. Furthermore, microFF-PRPEC was also successfully applied into the separation of lysozyme and ribonuclease B, and resolution as high as 9.4 was obtained. All these results demonstrate that microFF-RPPEC might have great potential in the microscale continuous preparation of samples with improved resolution compared to microFFE.
...
PMID:Microchip free flow planar reversed phase electrochromatography with monolithic stationary phase. 1958 31


<< Previous 1 2 3 4 5 6 7 Next >>

---