Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.2.1.17 (lysozyme)
 21,489 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A simple and rapid method using capillary zone electrophoresis (CZE) for the determination of milt protein (MP), which contains mainly protamine, and polylysine (PL) in food additive preparations and processed foods was developed. CZE separation was performed on poly(vinyl alcohol)-coated capillaries at a column temperature of 20 degrees C with 120 mmol/L phosphate buffer (pH 2.5) as the running buffer. The influence of various components in food additive preparations on CZE analysis of MP and PL was examined. Egg white lysozyme, glycine, sodium acetate, glycerol, fumaric acid, calcium carbonate, dextrin, emulsifiers and sodium polyphosphate and pyrophosphate had no effect. No peak of protamine was detected in preparations containing metaphosphate. The analysis method for processed foods was composed of extraction with 4% formic acid, precipitation of macromolecular compounds with ethanol, concentration in a water bath and determination by CZE. The average recoveries were 108.4% for protamine sulfate (PS) in red bean sticky rice, and 81.3% for PL in white rice, 118% in egg sandwiches, and 115% in shiraae. The limits of detection of PS in red bean sticky rice and PL in white rice were both 50 ppm.
 ...
PMID:Methods for determination of milt protein and epsilon-polylysine in food additive preparations and processed foods by capillary zone electrophoresis. 1148 87

The inflammatory response resulting from the implantation of a medical device may compromise its performance and efficiency leading, in certain cases, to the failure of the implant. Thus, the assessment of the behavior of inflammatory cells in vitro, constitutes a key feature in the evaluation of the adverse potential, or not, of new promising biomaterials. The objectives of this study were to determine whether starch-based polymers and composites activated human neutrophils. Blends of starch with ethylene-vinyl alcohol, with cellulose acetate and polycaprolactone, as well as composites based on all these materials filled with hydroxyapatite have been studied. A lysozyme assay was adapted to examine enzyme secretion from human neutrophils incubated with different starch-based materials. Changes in the free radical and degranulation activity of the neutrophil were also determined by measuring the luminescent response of Pholasin, a photoprotein that emits light after excitation by reactive oxygen species. The amount of lysozyme secreted by neutrophils incubated with the polymers did not exhibit significant differences between the tested materials. Results were in all cases similar to those obtained for the control (polypropylene) except for one of the starch blends (corn starch with polycaprolactone reinforced with 30% (w/w) of HA). The chemiluminescence experiments showed that polymers reduce the signal produced by activated neutrophils. Furthermore, for some polymers it was demonstrated that the phenomenon was due to an effect of the surface of the materials in cell adhesion or a simultaneous competition for the photoprotein in solution, which results in the decrease of the intensity of light emitted and detected.
 ...
PMID:Evaluation of the potential of starch-based biodegradable polymers in the activation of human inflammatory cells. 1534 89

A poly(dimethylsiloxane) (PDMS) microfluidic chip surface was modified by multilayer-adsorbed and heat-immobilized poly(vinyl alcohol) (PVA) after oxygen plasma treatment. The reflection absorption infrared spectrum (RAIRS) showed that 88% hydrolyzed PVA adsorbed more strongly than 100% hydrolyzed one on the oxygen plasma-pretreated PDMS surface, and they all had little adsorption on original PDMS surface. Repeating the coating procedure three times was found to produce the most robust and effective coating. PVA coating converted the original PDMS surface from a hydrophobic one into a hydrophilic surface, and suppressed electroosmotic flow (EOF) in the range of pH 3-11. More than 1,000,000 plates/m and baseline resolution were obtained for separation of fluorescently labeled basic proteins (lysozyme, ribonuclease B). Fluorescently labeled acidic proteins (bovine serum albumin, beta-lactoglobulin) and fragments of dsDNA phiX174 RF/HaeIII were also separated satisfactorily in the three-layer 88% PVA-coated PDMS microchip. Good separation of basic proteins was obtained for about 70 consecutive runs.
 ...
PMID:Multilayer poly(vinyl alcohol)-adsorbed coating on poly(dimethylsiloxane) microfluidic chips for biopolymer separation. 1562 73

A butyl methacrylate-co-ethylene dimethacrylate (BuMA-co-EDMA) monolith was synthesized by UV initiated polymerization at the inlet end of a 75 microm I.D. fused silica capillary that had been previously coated with a protein compatible polymer, poly(vinyl)alcohol. The monolith was used for on-line preconcentration of proteins followed by capillary electrophoresis (CE) separation. For the analysis of standard proteins (cytochrome c, lysozyme and trypsinogen A) this system proved reproducible. The run-to-run %RSD values for migration time and corrected peak area were less than 5%, which is typical of CE. As measured by frontal analysis using lysozyme as solute, saturation of a 1cm monolith was reached after loading 48 ng of protein. Finally, the BuMA-co-EDMA monolithic preconcentrator was coupled to a protein G monolithic column via a zero dead volume union. The coupled system was used for on-line removal of IgG, preconcentration of standard proteins and CE separation. This system could be a valuable sample preparation tool for the analysis of low abundance proteins in complex samples such as human serum, in which high abundance proteins, e.g., human serum albumin (HSA) and immunoglobulin G (IgG), hinder identification and quantification of low abundance proteins.
 ...
PMID:Coupled affinity-hydrophobic monolithic column for on-line removal of immunoglobulin G, preconcentration of low abundance proteins and separation by capillary zone electrophoresis. 1737 32

This paper describes the preparation, characterization, and enzymatic activity of complex coacervate core micelles (C3Ms) composed of poly(acrylic acid) (PAA) and poly(N-methyl-2-vinyl pyridinium iodide)-b-poly(ethylene oxide) (PQ2VP-PEO) to which the antibacterial enzyme lysozyme is end-attached. C3Ms were prepared by polyelectrolyte complex formation between PAA and mixtures containing different ratios of aldehyde and hydroxyl end-functionalized PQ2VP-PEO. This resulted in the formation of C3Ms containing 0-40% (w/w) of the aldehyde end-functionalized PQ2VP-PEO block copolymer (PQ2VP-PEO-CHO). Chemical conjugation of lysozyme was achieved via reductive amination of the aldehyde groups, which are exposed at the surface of the C3M, with the amine groups present in the side chains of the lysine residues of the protein. Dynamic and static light scattering indicated that the conjugation of lysozyme to C3Ms prepared using 10 and 20% (w/w) PQ2VP-PEO-CHO resulted in the formation of unimicellar particles. Multimicellar aggregates, in contrast, were obtained when lysozyme was conjugated to C3Ms prepared using 30 or 40% (w/w) PQ2VP-PEO-CHO. The enzymatic activity of the unimicellar lysozyme-C3M conjugates toward the hydrolysis of the bacterial substrate Micrococcus lysodeikticus was comparable to that of free lysozyme. For the multimicellar particles, in contrast, significantly reduced enzymatic rates of hydrolysis, altered circular dichroism, and red-shifted tryptophan fluorescence spectra were measured. These results are attributed to the occlusion of lysozyme in the interior of the multimicellar conjugates.
 ...
PMID:Complex coacervate core micelles with a lysozyme-modified corona. 1758 20

The complex formation between the basic protein lysozyme and anionic polyelectrolytes: poly acrylic acid and poly vinyl sulfonic acid was studied by turbidimetric and isothermal calorimetric titrations. The thermodynamic stability of the protein in the presence of these polymers was also studied by differential scanning calorimetry. The lysozyme-polymer complex was insoluble at pH lower than 6, with a stoichiometric ratio (polymer per protein mol) of 0.025-0.060 for lysozyme-poly vinyl sulfonic acid and around 0.003-0.001 for the lysozyme-poly acrylic acid. NaCl 0.1M inhibited the complex precipitation in agreement with the proposed coulombic mechanism of complex formation. Enthalpic and entropic changes associated to the complex formation showed highly negative values in accordance with a coulombic interaction mechanism. The protein tertiary structure and its thermodynamic stability were not affected by the presence of polyelectrolyte.
 ...
PMID:Interaction of lysozyme with negatively charged flexible chain polymers. 1764 99

Our previous studies showed that degradable dextran hydrogels are rapidly formed in situ upon mixing aqueous solutions of dextran vinyl sulfone (dex-VS) conjugates and tetrafunctional mercapto poly(ethylene glycol) (PEG-4-SH) by Michael addition. The hydrogel degradation time and storage modulus could be controlled by the degree of vinyl sulfone substitution (DS) and dextran molecular weight. The degradation time could further be adjusted by the spacer between the thioether and the ester bond of the dex-VS conjugates (ethyl vs. propyl, denoted as dex-Et-VS and dex-Pr-VS, respectively). In this paper, the release of three model proteins, i.e. immunoglobulin G (d(h)=10.7 nm, IgG), bovine serum albumin (BSA, d(h)=7.2 nm) and lysozyme (d(h)=4.1 nm), as well as basic fibroblast growth factor (bFGF) from these in situ forming dextran hydrogels is studied. Proteins could be easily loaded into the hydrogels by mixing protein containing solutions of dex-VS and PEG-4-SH. The release of IgG from dex-Et-VS hydrogels followed biphasic release kinetics, with a slow, close to first order release for the first 9 days followed by an accelerated release and over 80% of IgG was released in 12 to 25 days. Interestingly, the release of IgG from dex-Pr-VS hydrogels followed close to zero order kinetics, wherein approximately 95% was released in 21 days. The release of BSA from dex-Pr-VS hydrogels followed biphasic kinetics, with almost first order release followed by close to zero order release. Approximately 75% of the entrapped BSA could be released from dex-Pr-VS hydrogels in 16 days. Dex-Pr-VS hydrogels released 40% of lysozyme in 14 days, with full preservation of the enzymatic activity of the released lysozyme, as determined by bacteria lysis experiments. The release of basic fibroblast growth factor (bFGF) from dex-Pr-VS hydrogels showed first order kinetics, with quantitative release in 28 days. These results show that the in situ forming degradable dextran hydrogels can be used for the controlled release of proteins.
 ...
PMID:Release of model proteins and basic fibroblast growth factor from in situ forming degradable dextran hydrogels. 1765 51

A straightforward approach to generate a stable and protein-resistant poly(dimethylsiloxane) (PDMS) surface using self-assembled hydrophilic polymers is demonstrated in this work. Epoxy-modified polymers were directly adsorbed from aqueous solution onto plasma oxidized PDMS based on H-bond interaction, and epoxies of polymer and silanols on oxidized PDMS surface were crosslinked by heating at 110 degrees C. The coating process could be completed within half hour. Poly(dimethylacrylamide-co-glycidyl methacrylate) (PDMA-co-GMA), poly(vinyl pyrrolidone)-g-glycidyl methacrylate (PVP-g-GMA) and poly(vinyl alcohol)-g-glycidyl methacrylate (PVA-g-GMA) (D. P. Wu, B. X. Zhao, Z. P. Dai, J. H. Qin and B. C. Lin, Lab Chip, 2006, 6, 942) were employed as examples here. Unlike PDMA, PVP, and PVA themselves, these epoxy-modified hydrophilic polymers could be directly used as static surface coatings on oxidized PDMS, and inhibited electroosmotic flow (EOF) within pH 3-11. It was also found that hard baking of PDMS at 150 degrees C for 24 hours before surface coating could greatly retard surface hydrophobicity recovery after oxygen plasma exposure, which strengthened epoxy-modified polymer coatings on oxidized PDMS surface, and resulted in EOF less than 0.2 x 10(-4) cm(2) V(-1) s(-1) (pH 9.0) within two weeks. On epoxy-modified polymer coated PDMS microchips, basic proteins, peptides and DNA fragments could be separated satisfactorily, in which more than 2 x 10(4) plates per 2 cm and less than 3% RSD (>8 runs) for migration time were obtained for lysozyme.
 ...
PMID:Self-assembled epoxy-modified polymer coating on a poly(dimethylsiloxane) microchip for EOF inhibition and biopolymers separation. 1796 Feb 76

In this study, the influence of some factors on the heterogeneous nucleation of hen egg-white lysozyme (E.C. 3.2.1.17) on a series of chemically modified surfaces has been investigated. Microbatch crystallization experiments were conducted on the microscope glass slides that were treated with poly-L-glutamic acid (PLG), poly(2-hydroxyethyl methacrylate) (P2HEMA), poly(methyl methacrylate) (PMMA), poly(4-vinyl pyridine) (P4VP), and (3-aminopropyl)triethoxysilane (APTES). An optical microscope with a heating/cooling stage was employed to measure the induction time of heterogeneous nucleation. The surface topography and roughness were characterized by atomic force microscopy. Contact angles for crystallization solution on the investigated surfaces were measured by a contact angle meter. From the theoretical analysis, the energetic barrier to heterogeneous nucleation was found to increase at higher contact angles and to decrease at higher roughness. Experimentally, a qualitative increase of the induction time of the heterogeneous nucleation on P2HEMA, APTES, and PMMA surfaces with the contact angle was observed. Such surfaces as P2HEMA, PLG, and APTES, which were of higher roughness, were shown to promote the heterogeneous nucleation. In addition, the surface with specific topography is expected to increase the possibility of the formation of a critical nucleus. Finally, the P4VP surface appeared to suppress the heterogeneous nucleation as a result of the electrostatic interaction between the lysozyme and P4VP molecules.
 ...
PMID:Influence of the roughness, topography, and physicochemical properties of chemically modified surfaces on the heterogeneous nucleation of protein crystals. 1804 62

This study investigated the effect of ion-pairing of anionic polyelectrolytes: our novel poly(ethylene glycol)-block-oligo(vinyl sulfadimethoxine) (PEG-OVSDM) and poly(ethylene glycol)-block-poly(l-aspartic acid) (PEG-PAA) with cationic lysozyme on retention of protein stability during emulsification. Soluble lysozyme recovery after exposure to the deleterious interface was 42-88% (when ion-paired with PEG-OVSDM, PEG-OVSDM concentration dependent) compared to only 30% for free lysozyme. PEG-OVSDM provided a higher stabilization of lysozyme than PEG-PAA (36-60%). Lysozyme when recovered in the aqueous phase and analyzed by chromatography, enzymatic assay, fluorescence, and mass spectrometry showed no significant physicochemical change when compared with a lysozyme standard. Lysozyme was incorporated into poly(lactide-co-glycolide) (PLGA) microspheres via the typical double emulsion method. Incorporation of lysozyme complexes led to a higher encapsulation efficiency and loading amount, and a lower incidence of insoluble lysozyme aggregates compared to the control microspheres containing lysozyme only. More significantly, ion-pairing was able to dramatically reduce the initial lysozyme release to 18% compared with 50% from control microspheres and provided an overall better control of protein release. PEG-PAA was less effective than PEG-OVSDM in controlling the release probably due to weaker interactions between this polyelectrolyte and lysozyme. Manipulation of such polyelectrolyte-protein complexation may play a role in protein-controlled delivery.
 ...
PMID:Role of a novel multifunctional excipient poly(ethylene glycol)-block-oligo(vinyl sulfadimethoxine) in controlled release of lysozyme from PLGA microspheres. 1839 74


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>