Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.2.1.17 (lysozyme)
 21,489 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Lysozyme solubilized in reverse micelles of bis(2-ethylhexyl) sodium sulfosuccinate in isooctane containing as little as 0.8% water (v/v) has been shown to be active. The amount of enzymatic activity depends on the water content and the pH of the reverse micellar system and under optimum conditions (i.e. pH 7.7 with 1.2% water) is 90% of the activity in water. The dependence of lysozyme activity on pH in reverse micelles is different than that in water, with the entire pH profile shifted 2 to 3 pH units higher in reverse micelles. Moreover, maximum enzyme activity is not found at the highest water contents tested (i.e. 1.6% and 2.0% water), but instead at 1.2% water. The Km for the N-acetylglucosamine oligomers used as substrate is 0.1 mM in reverse micelles (compared to 0.01 mM in water) when the concentration of substrate is referred to the water pools. Spectroscopic studies (CD, fluorescence, and UV absorbance) indicate that the conformation of lysozyme is significantly different in reverse micelles compared to water. In particular, CD studies indicate that the helical content of lysozyme changes from approximately 34% in water to approximately 48% in reverse micelles. Conformation and activity data are qualitatively correlated to the anomalous character of water in the reverse micelles. In particular, this may induce a stronger hydrogen bonding within the lysozyme which would in turn increase both the pKa of certain amino acid residues and the helical content of the macromolecule.
 ...
PMID:Micellar solubilization of biopolymers in organic solvents. Activity and conformation of lysozyme in isooctane reverse micelles. 719 10

The partial specific volume and adiabatic compressibility of proteins reflect the hydration properties of the solvent-exposed protein surface, as well as changes in conformational states. Reverse micelles, or water-in-oil microemulsions, are protein-sized, optically-clear microassemblies in which hydration can be experimentally controlled. We explore, by densimetry and ultrasound velocimetry, three basic proteins: cytochrome c, lysozyme, and myelin basic protein in reverse micelles made of sodium bis (2-ethylhexyl) sulfosuccinate, water, and isooctane and in aqueous solvents. For comparison, we use beta-lactoglobulin (pI = 5.1) as a reference protein. We examine the partial specific volume and adiabatic compressibility of the proteins at increasing levels of micellar hydration. For the lowest water content compatible with complete solubilization, all proteins display their highest compressibility values, independent of their amino acid sequence and charge. These values lie within the range of empirical intrinsic protein compressibility estimates. In addition, we obtain volumetric data for the transition of myelin basic protein from its initially unfolded state in water free of denaturants, to a folded, compact conformation within the water-controlled microenvironment of reverse micelles. These results disclose yet another aspect of the protein structural properties observed in membrane-mimetic molecular assemblies.
 ...
PMID:Hydration and protein folding in water and in reverse micelles: compressibility and volume changes. 1137 50

Sodium di(2-ethylhexyl) sulfosuccinate, referred to as Aerosol-OT or AOT, was used to remove lysozyme from an aqueous phase via reverse micellar extraction and precipitation method. For both methods, when the surfactant was in excess, a complete removal of lysozyme from the aqueous phase was obtained at the values of pH below the pI of lysozyme. However, for the reverse micellar method, a solubilization limit of lysozyme in the organic phase was observed, and a white precipitate was formed at the aqueous-organic interface. This observation suggested using AOT directly as a precipitating ligand. The lysozyme precipitated with AOT was fully recovered, with its original enzymatic activity, using acetone as a recovery solvent. A mechanism is suggested to explain the solubilization of lysozyme in an AOT reverse micellar system. It is shown that a direct precipitation method can be used with advantage instead of using the reverse micellar extraction method to recover lysozyme from an aqueous phase.
 ...
PMID:Reverse micellar extraction and precipitation of lysozyme using sodium di(2-ethylhexyl) sulfosuccinate. 2967 66

The higher order structure of proteins solubilized in an bis(2-ethylhexyl) sulfosuccinate sodium (AOT) reverse micellar system was investigated. From circular dichroic (CD) measurement, CD spectra of cytochrome c, which is solubilized at the interface of reverse micelles, markedly changed on going from buffer solution to the reverse micellar solution, and the ellipticity values in the far- and near-UV regions decreased with decreasing the water content (W0: molar ratio of water to AOT), indicating that the secondary and tertiary structures of cytochrome c changed with the water content. The ellipticity of ribonuclease A, which is solubilized in the center of micellar water pool, in the near-UV region was dependent on W0 and became minimum when W0 of ca. 8 while the ellipticity in the far-UV region was almost constant, indicating that the tertiary structure of ribonuclease A was affected by the water content, but the secondary structure was conserved. The degree of curvature of the micellar interface appears to influence the protein structure because the reverse micelle size is linearly proportional to the W0 value. As evidence of this, when the micelle size was comparable to the protein's dimensions, the structures were more affected by the water content. Judging from the dependence of the factor influencing the protein structure on the protein species, the location of solubilized protein in reverse micelles is significantly related to whether the protein structure in the system is affected by the micellar interface. In the cases of cytochrome c and lysozyme, the ellipticity against W0 was dependent on the AOT concentration. In contrast, ribonuclease A gave very similar ellipticity values whatever the AOT concentration. In the n-hexane micellar system, cytochrome c exhibited lower ellipticity values and ribonuclease A in the lower W0 range (W0<ca. 8) higher ellipticity values. These results indicated that the interaction between the protein and the micellar interface is a dominant factor influencing the protein structure in reverse micelles, and that it is governed by the location of solubilized proteins and the state of the micellar interface.
 ...
PMID:Higher order structure of proteins solubilized in AOT reverse micelles. 1554 22

The refolding kinetics of the reduced, denatured hen egg white lysozyme in sodium bis(2-ethylhexyl)sulfosuccinate (AOT)-isooctane-water reverse micelles at different water-to-surfactant molar ratios has been investigated by fluorescence spectroscopy and UV spectroscopy. The oxidative refolding of the confined lysozyme is biphasic in AOT reverse micelles. When the water-to-surfactant molar ratio (omega 0) is 12.6, the relative activity of encapsulated lysozyme after refolding for 24 h in AOT reverse micelles increases 46% compared with that in bulk water. Furthermore, aggregation of lysozyme at a higher concentration (0.2 mM) in AOT reverse micelles at omega 0 of 6.3 or 12.6 is not observed; in contrast, the oxidative refolding of lysozyme in bulk water must be at a lower protein concentration (5 microM) in order to avoid a serious aggregation of the protein. For comparison, we have also investigated the effect of AOT on lysozyme activity and found that the residual activity of lysozyme decreases with increasing the concentration of AOT from 1 to 5 mM. When AOT concentration is larger than 2 mM, lysozyme is almost completely inactivated by AOT and most of lysozyme activity is lost. Together, our data demonstrate that AOT reverse micelles with suitable water-to-surfactant molar ratios are favorable to the oxidative refolding of reduced, denatured lysozyme at a higher concentration, compared with bulk water.
 ...
PMID:Oxidative refolding of reduced, denatured lysozyme in AOT reverse micelles. 1837 20

Experiments are reported here on the equilibrium partitioning of lysozyme and ribonuclease-a between aqueous and reversed micellar phases comprised of an anionic surfactant, sodium di-2-ethylhexyl sulfosuccinate (AOT), in isooctane. A distinct maximum, [P](rm,max) was found for the quantity of a given protein that can be solubilized in the reverse micelle phase by the phase-transfer method. This upper limit depended upon the size of the protein, the surfactant concentration, and the aqueous phase ionic strength, and was determined by complex formation between protein and surfactant molecules to form an insoluble interfacial precipitate at high values of [P](rm). In this work, it was found to be possible to dissociate the protein-surfactant complex and recover the precipitated protein. The kinetics of protein-surfactant complex formation depended upon the nature and concentration of the solubilized protein and on the surfactant concentration. Calculations of micellar occupancy and the relative surface areas of protein molecules and surfactant head-groups suggested that it was the exposure of the solubilized protein to the bulk organic solvent which promoted protein-surfactant complex formation as [P](rm) --> [P](rm,max). In the light of the experimental results and calculations described above, a mechanistic model is proposed to account for the observed phenomena. This is based upon the competing effects of increasing the solubilized protein concentration and the corresponding increase in the rate of protein-surfactant complex formation. The dynamic nature of the reverse micelles is inherent in the model, explaining the formation of the interfacial precipitate with time and its dependence on the internal phase volume of the micellar phase. Experiments on the co-partitioning of water and measurement ofthe AOT concentration in both phases verified the loss of protein, water, and surfactant from the organic phase at high values of [P](rm). (c) 1995 John Wiley & Sons Inc.
 ...
PMID:Extraction of lysozyme and ribonuclease-a using reverse micelles: Limits to protein solubilization. 1862 29

A new nonionic reverse micellar system is developed by blending two nonionic surfactants, Triton X-45 and Span 80. At total surfactant concentrations lower than 60 mmol/L and molar fractions of Triton X-45 less than 0.6, thermodynamically stable reverse micelles of water content (W(0)) up to 30 are formed. Di(2-ethylhexyl) phosphoric acid (HDEHP; 1-2 mmol/L) is introduced into the system for chelating transition metal ions that have binding affinity for histidine-rich proteins. HDEHP exists in a dimeric form in organic solvents and a dimer associated with one transition metal ion, including copper, zinc, and nickel. The copper-chelate reverse micelles (Cu-RM) are characterized for their W(0), hydrodynamic radius (R(h)), and aggregation number (N(ag)). Similar with reverse micelles of bis-2-ethylhexyl sodium sulfosuccinate (AOT), R(h) of the Cu-RM is also linearly related to W(0). However, N(ag) is determined to be 30-90 at W(0) of 5-30, only quarter to half of the AOT reverse micelles. Then, selective metal-chelate extraction of histidine-rich protein (myoglobin) by the Cu-RM is successfully performed with pure and mixed protein systems (myoglobin and lysozyme). The solubilized protein can be recovered by stripping with imidazole or ethylinediaminetetraacetic acid (EDTA) solution. Because various transition metal ions can be chelated to the reverse micelles, it is convinced that the system would be useful for application in protein purification as well as simultaneous isolation and refolding of recombinant histidine-tagged proteins expressed as inclusion bodies.
 ...
PMID:A metal-chelate affinity reverse micellar system for protein extraction. 1983 Aug 21

Voltammetric behaviors of various globular proteins, including cytochrome c, ribonuclease A, lysozyme, albumin, myoglobin, and alpha-lactalbumin, were studied at the polarized 1,2-dichloroethane/water (DCE/W) interface in the presence of four different anionic surfactants, that is, dinonylnaphthalenesulfonate (DNNS), bis(2-ethylhexyl)sulfosuccinate (Aerosol-OT; AOT), bis(2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl)sulfosuccinate (BDFHS), and bis(2-ethylhexyl)phosphate (BEHP). When the W phase was acidic (pH = approximately 3.4), the surfactants (except for BEHP) added to DCE facilitated the adsorption of the above proteins to the DCE/W interface and gave a well-developed voltammetric wave due to the adsorption/desorption of the proteins. This voltammetric wave, which we here call "protein wave", is promising for direct label-free electrochemical detection of proteins. The current for the adsorption of a protein to the interface showed a linear dependence on the protein concentration in the presence of excess surfactant. The foot potential at which the protein wave appeared in cyclic voltammetry showed different values depending on the natures of the protein and surfactant. Multivariate analysis for the foot potentials determined for different proteins with different surfactants revealed that the protein selectivity should depend on the charged, polar, and nonpolar surface areas of a protein molecule. On the basis of these voltammetric studies, it was shown in principle that online electrochemical separation/determination of proteins could be performed using a two-step oil/water-type flow-cell system.
 ...
PMID:Direct label-free electrochemical detection of proteins using the polarized oil/water interface. 2046 45

The recovery of lysozyme from an aqueous solution containing precipitated lysozyme-AOT complexes formed by the direct addition of sodium bis-(2-ethylhexyl) sulfosuccinate (AOT) to a lysozyme solution was studied using both solvents, and a counterionic surfactant. Ethanol,methanol and solvent mixtures dissolved the surfactant precipitate and recovered lysozyme as a solid. Recovery efficiency and protein stability varied with the type of solvent used. An entirely different method of recovery was also evaluated using a counterionic surfactant: tri-octylmethylammonium chloride (TOMAC) which bound to AOT releasing lysozyme into solution.Complete recovery (100%) of lysozyme was achieved at a molar ratio of 2:1(TOMAC:AOT), and the original protein activity was maintained in the final aqueous phase.The recovered lysozyme retained its secondary structure as observed in circular dichroism(CD) spectra. Specific activity studies show that counterionic surfactant extraction does not alter the biological activity of the enzyme.
 ...
PMID:Protein recovery from surfactant precipitation. 2223 87

Catanionic vesicles were prepared by mixing nonstoichiometric amounts of sodium bis(2-ethylhexyl) sulfosuccinate and dioctyldimethylammonium bromide in water. Depending on the concentration and mole ratios between the surfactants, catanionic vesicular aggregates are formed. They have either negative or positive charges in excess and are endowed with significant thermodynamic and kinetic stability. Vesicle characterization was performed by dynamic light scattering and electrophoretic mobility. It was inferred that vesicle size scales in inverse proportion with its surface charge density and diverges as the latter quantity approaches zero and/or the mole ratio equals unity. Therefore, both variables are controlled by the anionic/cationic mole ratio. Small-angle X-ray scattering, in addition, indicates that vesicles are unilamellar. Selected anionic vesicular systems were reacted with poly-L-lysine hydrobromide or lysozyme. Polymer binding continues until complete neutralization of the negatively charged sites on the vesicles surface is attained, as inferred by electrophoretic mobility. Lipoplexes are formed as a result of significant electrostatic interactions between cationic polyelectrolytes and negatively charged vesicles.
 ...
PMID:Binding of a protein or a small polyelectrolyte onto synthetic vesicles. 2456 53


1 2 Next >>