Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:3.2.1.17 (lysozyme)
21,489 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The equilibrium unfolding and the kinetics of unfolding and refolding of equine lysozyme, a Ca2+-binding protein, were studied by means of circular dichroism spectra in the far and near-ultraviolet regions. The transition curves of the guanidine hydrochloride-induced unfolding measured at 230 nm and 292.5 nm, and for the apo and holo forms of the protein have shown that the unfolding is well represented by a three-state mechanism in which the molten globule state is populated as a stable intermediate. The molten globule state of this protein is more stable and more native-like than that of alpha-lactalbumin, a homologous protein of equine lysozyme. The kinetic unfolding and refolding of the protein were induced by concentration jumps of the denaturant and measured by stopped-flow circular dichroism. The observed unfolding and refolding curves both agreed well with a single-exponential function. However, in the kinetic refolding reactions below 3 M guanidine hydrochloride, a burst-phase change in the circular dichroism was present, and the burst-phase intermediate in the kinetic refolding is shown to be identical with the molten globule state observed in the equilibrium unfolding. Under a strongly native condition, virtually all the molecules of equine lysozyme transform the structure from the unfolded state into the molten globule, and the subsequent refolding takes place from the molten globule state. The transition state of folding, which may exist between the molten globule and the native states, was characterized by investigating the guanidine hydrochloride concentration-dependence of the rate constants of refolding and unfolding. More than 80% of the hydrophobic surface of the protein is buried in the transition state, so that it is much closer to the native state than to the molten globule in which only 36% of the surface is buried in the interior of the molecule. It is concluded that all the present results are best explained by a sequential model of protein folding, in which the molten globule state is an obligatory folding intermediate on the pathway of folding.
...
PMID:Equilibrium and kinetics of the folding of equine lysozyme studied by circular dichroism spectroscopy. 976 89

For echidna and canine milk lysozymes, which were presumed to be the calcium-binding lysozymes by their amino acid sequences, we have quantitated their calcium-binding strength and examined their guanidine unfolding profiles. The calcium-binding constants of echidna and canine lysozymes were determined to be 8.6 x 10(6) M(-1) and 8.9 x 10(6) M(-1) in 0.1 M KCl at pH 7.1 and 20 C, respectively. The unfolding of decalcified canine lysozyme proceeds in the same manner as that of alpha-lactalbumin, through a stable molten globule intermediate. However, neither calcium-bound nor decalcified echidna lysozyme shows a stable molten globule intermediate. This unfolding profile of echidna lysozyme is identical to that of conventional lysozymes and pigeon egg-white lysozyme, avian calcium-binding lysozyme. This result supports the suggestion of Prager and Jolles (Prager EM, Jolles P. 1996. Animal lysozymes c and g: An overview. In: Jolles P, ed. Lysozymes: Model enzymes in biochemistry and biology. Basel-Boston-Berlin: Birkhauzer Verlag. pp 9-31) that the lineage of avian and echidna calcium-binding lysozymes and that of eutherian calcium-binding lysozymes diverged separately from that of conventional lysozymes.
...
PMID:Calcium-binding and structural stability of echidna and canine milk lysozymes. 979 2

A new method for encapsulating a model protein, lysozyme into hydrophilic uncapped poly(d,l-lactic-co-glycolic acid) (PLGA) microspheres was developed using an oil/water (O/W) single emulsion technique. Lysozyme powder, which was prepared from lyophilization after adjusting a lysozyme solution pH at 3, was molecularly dissolved in a co-solvent system composed of dimethylsulfoxide (DMSO) and methylene chloride. The resulting organic solution containing PLGA was directly emulsified into an aqueous phase, and the organic solvent phase was extracted and evaporated. Various lysozyme-loaded PLGA microspheres having different morphologies were obtained depending on the relative mixing ratio of the two co-solvents used. In vitro release experiments indicated that an initial lysozyme release rate from the microspheres was mainly controlled by ionic interaction between basic amino acid residues in lysozyme and free carboxylate groups in PLGA polymer chain ends, which was probed by incubating the microspheres in a series of media having different NaCl concentrations. However, the protein release leveled off after about 15 days' incubation. To determine the reason for the protein 'no-release' from biodegradable microspheres, a systematic analysis was carried out. By separately adding 0.5 M NaCl, 5 M guanidine HCl, or 5 mM sodium dodecyl sulfate into the release media during the non-release period, it was possible to selectively identify a specific protein non-release mechanism: ionic interaction, non-covalent aggregation, and/or surface adsorption, respectively. It was found that non-covalent aggregation and surface adsorption of lysozyme within the microspheres were the main cause of no further release, whereas ionic interaction between degrading polymer and protein played an insignificant role in the later stage of the release period. The greater amount of additional lysozyme release by sodium dodecyl sulfate than by guanidine hydrochloride suggested that protein surface adsorption was a more critical factor in protein release than aggregation.
...
PMID:A new preparation method for protein loaded poly(D, L-lactic-co-glycolic acid) microspheres and protein release mechanism study. 979 50

Determination of protein stability (DeltaGD0) from the conformational transition curve induced by a chemical denaturant is problematic; for different values of DeltaGD0, the value of the Gibbs energy change on denaturation (DeltaGD) in the absence of the denaturant are obtained when different extrapolation methods are used to analyze the same set of (DeltaGD, denaturant concentration) data [Pace, C. N. (1986) Methods Enzymol. 131, 266-280]. We propose a practical solution to this problem and use it to test the dependence of DeltaGD of lysozyme, ribonuclease-A, and cytochrome-c on [urea], the molar urea concentration. This method employs (i) measurements of the urea-induced denaturation in the presence of different guanidine hydrochloride (GdnHCl) concentrations which by themselves disrupt the native state of the protein at the same temperature and pH at which denaturations by urea and GdnHCl have been measured; (ii) estimation of DeltaGDcor, the value of DeltaGD corrected for the effect of GdnHCl on the urea-induced denaturation using the relation (DeltaGDcor = DeltaGD + mg [GdnHCl] = DeltaGD0 - mu [urea], where mg and mu are the dependencies of DeltaGD on [GdnHCl] and [urea], respectively) whose parameters are all determined from experimental denaturation data; and (iii) mapping of DeltaGDcor onto the DeltaGD versus [urea] plot obtained in the absence of GdnHCl. Our results convincingly show that (i) [urea] dependence of DeltaGD of each protein is linear over the full concentration range; (ii) the effect of urea and GdnHCl on protein denaturation is additive; and (iii) KCl affects the urea-induced denaturation if the native protein contains charge-charge interaction and/or anion binding site, in a manner which is consistent with the crystal structure data.
...
PMID:Protein stability: functional dependence of denaturational Gibbs energy on urea concentration. 1002 41

The unfolding and refolding properties of human lysozyme and two amyloidogenic variants (Ile56Thr and Asp67His) have been studied by stopped-flow fluorescence and hydrogen exchange pulse labeling coupled with mass spectrometry. The unfolding of each protein in 5.4 M guanidine hydrochloride (GuHCl) is well described as a two-state process, but the rates of unfolding of the Ile56Thr variant and the Asp67His variant in 5.4 M GuHCl are ca. 30 and 160 times greater, respectively, than that of the wild type. The refolding of all three proteins in 0.54 M GuHCl at pH 5.0 proceeds through persistent intermediates, revealed by multistep kinetics in fluorescence experiments and by the detection of well-defined populations in quenched-flow hydrogen exchange experiments. These findings are consistent with a predominant mechanism for refolding of human lysozyme in which one of the structural domains (the alpha-domain) is formed in two distinct steps and is followed by the folding of the other domain (the beta-domain) prior to the assembly of the two domains to form the native structure. The refolding kinetics of the Asp67His variant are closely similar to those of the wild-type protein, consistent with the location of this mutation in an outer loop of the beta-domain which gains native structure only toward the end of the refolding process. By contrast, the Ile56Thr mutation is located at the base of the beta-domain and is involved in the domain interface. The refolding of the alpha-domain is unaffected by this substitution, but the latter has the effect of dramatically slowing the folding of the beta-domain and the final assembly of the native structure. These studies suggest that the amyloidogenic nature of the lysozyme variants arises from a decrease in the stability of the native fold relative to partially folded intermediates. The origin of this instability is different in the two variants, being caused in one case primarily by a reduction in the folding rate and in the other by an increase in the unfolding rate. In both cases this results in a low population of soluble partially folded species that can aggregate in a slow and controlled manner to form amyloid fibrils.
...
PMID:Mechanistic studies of the folding of human lysozyme and the origin of amyloidogenic behavior in its disease-related variants. 1035 Apr 60

The molten globule state of equine lysozyme is more stable than that of alpha-lactalbumin and is stabilized by non-specific hydrophobic interactions and native-like hydrophobic interactions. We constructed a chimeric protein which is produced by replacing the flexible loop (residues 105-110) in human alpha-lactalbumin with the helix D (residues 109-114) in equine lysozyme to investigate the possible role of the helix D for the high stability and native-like packing interaction in the molten globule state of equine lysozyme. The stability of the molten globule state formed by the chimeric protein to guanidine hydrochloride-induced unfolding is the same as that of equine lysozyme and is substantially greater than that of human alpha-lactalbumin, although only six residues come from equine lysozyme. Our results also suggest that the non-native interaction in the molten globule state of alpha-lactalbumin changes to the native-like packing interaction due to helix substitution. The solvent-accessibility of the Trp residues in the molten globule state of the chimeric protein is similar to that in the molten globule state of equine lysozyme in which packing interaction around the Trp residues in the native state is partially preserved. Therefore, the helix D in equine lysozyme is one of the contributing factors to the high stability and native-like packing interaction in the molten globule state of equine lysozyme. Our results indicate that the native-like packing interaction can stabilize the rudimentary intermediate which is stabilized by the non-specific hydrophobic interactions.
...
PMID:The molten globule state of a chimera of human alpha-lactalbumin and equine lysozyme. 1051 8

We compared and statistically evaluated the effectiveness of nine DNA extraction procedures by using frozen and dried samples of two silt loam soils and a silt loam wetland sediment with different organic matter contents. The effects of different chemical extractants (sodium dodecyl sulfate [SDS], chloroform, phenol, Chelex 100, and guanadinium isothiocyanate), different physical disruption methods (bead mill homogenization and freeze-thaw lysis), and lysozyme digestion were evaluated based on the yield and molecular size of the recovered DNA. Pairwise comparisons of the nine extraction procedures revealed that bead mill homogenization with SDS combined with either chloroform or phenol optimized both the amount of DNA extracted and the molecular size of the DNA (maximum size, 16 to 20 kb). Neither lysozyme digestion before SDS treatment nor guanidine isothiocyanate treatment nor addition of Chelex 100 resin improved the DNA yields. Bead mill homogenization in a lysis mixture containing chloroform, SDS, NaCl, and phosphate-Tris buffer (pH 8) was found to be the best physical lysis technique when DNA yield and cell lysis efficiency were used as criteria. The bead mill homogenization conditions were also optimized for speed and duration with two different homogenizers. Recovery of high-molecular-weight DNA was greatest when we used lower speeds and shorter times (30 to 120 s). We evaluated four different DNA purification methods (silica-based DNA binding, agarose gel electrophoresis, ammonium acetate precipitation, and Sephadex G-200 gel filtration) for DNA recovery and removal of PCR inhibitors from crude extracts. Sephadex G-200 spin column purification was found to be the best method for removing PCR-inhibiting substances while minimizing DNA loss during purification. Our results indicate that for these types of samples, optimum DNA recovery requires brief, low-speed bead mill homogenization in the presence of a phosphate-buffered SDS-chloroform mixture, followed by Sephadex G-200 column purification.
...
PMID:Evaluation and optimization of DNA extraction and purification procedures for soil and sediment samples. 1054 76

High hydrostatic pressures (1-2 kbar), combined with low, nondenaturing concentrations of guanidine hydrochloride (GdmHCl) foster disaggregation and refolding of denatured and aggregated human growth hormone and lysozyme, and beta-lactamase inclusion bodies. One hundred percent recovery of properly folded protein can be obtained by applying pressures of 2 kbar to suspensions containing aggregates of recombinant human growth hormone (up to 8.7 mg/ml) and 0.75 M GdmHCl. Covalently crosslinked, insoluble aggregates of lysozyme could be refolded to native, functional protein at a 70% yield, independent of protein concentration up to 2 mg/ml. Inclusion bodies containing beta-lactamase could be refolded at high yields of active protein, even without added GdmHCl.
...
PMID:High pressure fosters protein refolding from aggregates at high concentrations. 1055 67

Recent advances in single molecule manipulation methods offer a novel approach to investigating the protein folding problem. These studies usually are done on molecules that are naturally organized as linear arrays of globular domains. To extend these techniques to study proteins that normally exist as monomers, we have developed a method of synthesizing polymers of protein molecules in the solid state. By introducing cysteines at locations where bacteriophage T4 lysozyme molecules contact each other in a crystal and taking advantage of the alignment provided by the lattice, we have obtained polymers of defined polarity up to 25 molecules long that retain enzymatic activity. These polymers then were manipulated mechanically by using a modified scanning force microscope to characterize the force-induced reversible unfolding of the individual lysozyme molecules. This approach should be general and adaptable to many other proteins with known crystal structures. For T4 lysozyme, the force required to unfold the monomers was 64 +/- 16 pN at the pulling speed used. Refolding occurred within 1 sec of relaxation with an efficiency close to 100%. Analysis of the force versus extension curves suggests that the mechanical unfolding transition follows a two-state model. The unfolding forces determined in 1 M guanidine hydrochloride indicate that in these conditions the activation barrier for unfolding is reduced by 2 kcal/mol.
...
PMID:Solid-state synthesis and mechanical unfolding of polymers of T4 lysozyme. 1061 84

Human lysozyme has four disulfide bonds, one of which, Cys65-Cys81, is included in a long loop of the beta-domain. A cysteine-scanning mutagenesis in which the position of Cys65 was shifted within a continuous segment from positions 61 to 67, with fixed Cys81, has previously shown that only the mutant W64CC65A, which has a nonnative Cys64-Cys81 disulfide, can be correctly folded and secreted by yeast. Here, using the W64CC65A mutant, we investigated the effects of an alternative disulfide bond on the structure, stability, and folding of human lysozyme using circular dichroism (CD) and fluorescence spectroscopy combined with a stopped-flow technique. Although the mutant is expected to have a different main-chain structure from that of the wild-type protein around the loop region, far- and near-UV CD spectra show that the native state of the mutant has tightly packed side chains and secondary structure similar to that of the wild-type. Guanidine hydrochloride-induced equilibrium unfolding transition of the mutant is reversible, showing high stability and cooperativity of folding. In the kinetic folding reaction, both proteins accumulate a similar burst-phase intermediate having pronounced secondary structure within the dead time of the measurement and fold into the native structure by means of a similar folding mechanism. Both the kinetic refolding and unfolding reactions of the mutant protein are faster than those of the wild-type, but the increase in the unfolding rate is larger than that of the refolding rate. The Gibbs' free-energy diagrams obtained from the kinetic analysis suggest that the structure around the loop region in the beta-domain of human lysozyme is formed after the transition state of folding, and thus, the effect of the alternative disulfide bond on the structure, stability, and folding of human lysozyme appears mainly in the native state.
...
PMID:Effect of an alternative disulfide bond on the structure, stability, and folding of human lysozyme. 1072 42


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>

---