Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:3.2.1.17 (lysozyme)
21,489 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Intravenous injection of bovine serum albumin (BSA) into the BSA/CFA-primed ICR mice specifically induced anaphylactic death within 1 h. The anaphylactic death could not be induced until day 8 after sensitization, and sensitization subsisted for more than 3 months. The response was dose dependent; mice challenged with BSA doses higher or equivalent to 25 microgram developed anaphylactic death. The intravenous route was more effective than the intraperitoneal one, while subcutaneous injection was ineffective. Antigen in any of complete Freund's adjuvant, incomplete Freund's adjuvant or aluminum hydroxide could sensitize the mice to develop anaphylactic death. The combination of antigen and the mouse strain or the gender of the mouse determined the susceptibility of the anaphylactic death. AKR, B10.BR, as well as ICR, strains were susceptible. Antigen of HoGG induced a higher mortality rate than that of GAT or lysozyme. Male mice were more susceptible than female ones. The BSA-induced anaphylactic death could be prevented by pretreating ICR mice with cyproheptadine (histamine and serotonin antagonist) or diphenhydramine (histamine antagonist) and ketanserin (serotonin antagonist). Intravenous injection of saline during anaphylaxis also protected the mice from death. Furthermore, immune serum could transfer the anaphylactic death, and heat (56 degrees C, 4 h) did not destroy its activity. The primary IgG subclass induced by GAT, HoGG or lysozyme was IgG1. There was no qualitative difference in the IgG subclass induced in different strains by different antigens. The IgE class of antibodies was not detectable. These results suggest that there is a non-IgE-mediated anaphylactic death which involves the release of histamine and serotonin that cause the increase of vasopermeability and fatal blood volume loss.
...
PMID:Antigen-induced anaphylactic death in mice. 863 27

Aluminium hydroxide adjuvant has an isoelectric point (i.e.p.) of ca 11 and is a good adsorbent for acidic proteins due to the contribution of electrostatic attractive forces. However, electrostatic repulsive forces reduce its ability to adsorb basic proteins. Pretreatment of aluminium hydroxide adjuvant with carefully selected concentrations of phosphate anion reduces the positive surface charge which exists at pH 7.4. Treatment with higher concentrations of phosphate anion produces a negative surface charge. The adsorption of lysozyme (i.e.p = 11.1) was found to be directly related to the concentration of phosphate anion used to pretreat the aluminium hydroxide adjuvant.
...
PMID:Treatment of aluminium hydroxide adjuvant to optimize the adsorption of basic proteins. 874 56

The fact that both aluminum hydroxide adjuvant and proteins have a pH dependent surface charge means that electrostatic forces play a role in the adsorption of proteins by aluminum hydroxide adjuvant during the preparation of vaccines. The objective of this study was to examine the contribution of the electrostatic attractive force in the adsorption of proteins by aluminum hydroxide adjuvant. Since the surface charge characteristics of aluminum hydroxide adjuvant can be modified by the adsorption of phosphate anion, a series of aluminum hydroxide adjuvants were prepared by treatment with various concentrations of phosphate anion. The isoelectric points (iep) of these adjuvants ranged from 11.0 to 4.6 and the electrophoretic mobilities at pH 7.4 ranged from 2.0 to -3.3 microns cm/V s. The line broadening of the (020) band of the X-ray diffraction pattern indicated that treatment with phosphate anion did not change the primary crystallite dimension. Adsorption at pH 7.4 of positively charged lysozyme (iep = 11.1) was directly related to the negative surface charge of the adjuvant. No adsorption occurred when the surface charge was positive. In contrast, negatively charged ovalbumin (iep = 4.6) was adsorbed by all of the adjuvants at pH 7.4, although the adsorptive capacity was the greatest when the surface charge was positive. The results indicate that adsorptive forces in addition to the electrostatic attractive force play an important role in the adsorption of some proteins by aluminum hydroxide adjuvant. It is believed the structurally flexible proteins, like ovalbumin, exhibit more complex adsorption behavior than structurally rigid proteins, like lysozyme, for which adsorptive behavior can be explained by electrostatic forces.
...
PMID:Role of the electrostatic attractive force in the adsorption of proteins by aluminum hydroxide adjuvant. 909 61

A poly(styrene-divinylbenzene) (PSDVB) chromatography matrix, CG1000-sd (TosoHaas), has been modified using poly(vinyl alcohol) (PVA) to create a matrix suitable for the attachment of functional groups for the selective purification of proteins. The characteristics of the modified matrix have been studied using a BET nitrogen adsorption/desorption technique and it has been found that the adsorption of PVA results in the bead micropores being filled whilst the bead macropores are left essentially unaltered. There was no protein adsorption onto the modified matrices. A dye ligand (Procion Blue MX-R) has been covalently attached to PVA-PSDVB matrix and the lysozyme capacities of the PVA-PSDVB matrix have been determined. The matrix compares well with commercial Blue Sepharose Fast Flow, an affinity matrix on cross-linked agarose. The dye-PVA-PSDVB matrix is stable when subjected to sanitisation with sodium hydroxide.
...
PMID:Modification of polystyrenic matrices for the purification of proteins. Effect of the adsorption of poly(vinyl alcohol) on the characteristics of poly(styrene-divinylbenzene) beads for use in affinity chromatography. 918 73

The elutability of proteins from adjuvants in model vaccines composed of ovalbumin adsorbed by aluminum hydroxide adjuvant or lysozyme adsorbed by aluminum phosphate adjuvant following treatment with surfactant solutions was studied. Nonionic (Triton X-100, lauryl maltoside), zwitterionic (lauryl sulfobetaine), anionic (sodium dodecyl sulfate), and cationic (cetylpyridinium chloride, dodecyltrimethylammonium chloride) surfactants were investigated. Cetylpyridinium chloride produced the greatest degree of elution (60%) of ovalbumin from aluminum hydroxide adjuvant. Sodium dodecyl sulfate completely eluted lysozyme from aluminum phosphate adjuvant. The effectiveness of surfactants in removing preadsorbed proteins was directly related to their ability to denature the protein. Micellar solubilization and electrostatic repulsion may also contribute to desorption. Copyright 1998 Academic Press. Copyright 1998Academic Press
...
PMID:Elutability of Proteins from Aluminum-Containing Vaccine Adjuvants by Treatment with Surfactants 946 43

The effect of adjusting the pH of a model ovalbumin (iep = 4.7) and aluminum hydroxide adjuvant (iep = 11.5) vaccine or a model lysozyme (iep = 11.4) and aluminum phosphate adjuvant (iep = 5.0) vaccine to values ranging from 3 to 11 was studied. The model vaccine prepared at pH 7.4 served as the reference. Additional adsorption of ovalbumin occurred in the pH range 7.4 to 4.1. Elution of ovalbumin occurred when the pH was adjusted to values above 7.4 or below 4.1. Maximum elution occurred at pH 2.9 and 11.0. Elution of lysozyme from aluminum phosphate adjuvant occurred when the pH was adjusted to any value other than the reference pH of 7.4. More lysozyme was eluted at pH 2.9 than at pH 11.0. The adsorption/elution behavior could be explained by the effect of pH on: (1) the ionization state of the protein, 2) the solubility of the adjuvant, and (3) the electrostatic interaction between the protein and adjuvant. Copyright 1998 Academic Press.
...
PMID:Effect of pH on the Elution of Model Antigens from Aluminum-Containing Adjuvants. 971 May 9

Fast and efficient analysis of proteins in physiological fluids is of great interest to researchers and clinicians alike. Capillary electrophoresis (CE) has proven to be a potentially valuable tool for the separation of proteins in specimens. However, a generally acknowledged drawback of this technique is the limited sample volumes which can be loaded onto the CE capillary which results in a poor concentration limit of detection. In addition, matrix components in samples may also interfere with separation and detection of analytes. Membrane preconcentration-CE (mPC-CE) has proved to be effective in overcoming these problems. In this report, we describe the systematic evaluation of parameters affecting on-line preconcentration/clean-up and separation of protein mixtures by mPC-CE. Method development was carried out with a standard mixture of proteins (lysozyme, myoglobin, carbonic anhydrase, and human serum albumin). First, using MALDI-TOF-MS, membrane materials with cation-exchange (R-SO3H) or hydrophobic (C2, C8, C18, SDB) characteristics were evaluated for their potential to retain proteins in mPC cartridges. Hydrophobic membranes were found most suitable for this application. Next, all mPC-CE analysis of protein samples were performed in polybrene coated capillaries and parameters affecting sample loading, washing and elution, such as the composition and volume of the elution solvent were investigated. Furthermore, to achieve optimal mPC-CE performance for the separation of protein mixtures parameters affecting postelution focusing and electrophoresis, including the composition of the background electrolyte and a trailing stacking buffer were varied. Optimal conditions for mPC-CE analysis of proteins using a C2 impregnated membrane preconcentration (mPC) cartridge were achieved with a background electrolyte of 5% acetic acid and 2 mM ammonium acetate, 60 nl of 80% acetonitrile in H2O as an elution solvent, and 60 nl of 0.5% ammonium hydroxide as a trailing stacking buffer. The developed method was used successfully to separate proteins in aqueous humor, which contains numerous proteins in a complex matrix of salts.
...
PMID:Protein analysis by membrane preconcentration-capillary electrophoresis: systematic evaluation of parameters affecting preconcentration and separation. 974 45

Covalent linkage of poly(ethylene glycol) (PEG) to drug molecules results in water-soluble conjugates with altered bioavailability, pharmacokinetics, immunogenic properties, and biological activities. For drugs bearing one or more amino groups, reductive amination is a potentially useful method for conjugation to PEG. PEG acetaldehyde has been used for this purpose, but its ease of polymerization under certain conditions and its susceptibility to air oxidation have caused some problems in its application. A simple and reliable method for preparation and use in reductive amination of PEG acetaldehyde hydrate generated in situ by hydrolysis of PEG acetaldehyde diethylacetal is demonstrated. PEG acetaldehyde diethylacetal is prepared in high yield and purity by reaction of PEG with chlorodiethylacetal in dioxane in the presence of finely powdered sodium hydroxide under heterogeneous conditions. PEG acetaldehyde hydrate is generated in solution by hydrolysis in aqueous acids. Solutions of the hydrate may be used directly, in conjunction with sodium cyanoborohydride, to effect reductive amination. We demonstrate application of these methods in PEGylation of lysozyme and chitosan to form water-soluble methoxy poly(ethylene glycol) (mPEG) derivatives and PEG-chitosan hydrogels.
...
PMID:Reductive amination using poly(ethylene glycol) acetaldehyde hydrate generated in situ: applications to chitosan and lysozyme. 981 4

Vaccines prepared by adsorbing an antigen onto an aluminium-containing adjuvant are usually administered by intramuscular or subcutaneous injection. The vaccine then comes in contact with interstitial fluid which contains proteins. In vitro displacement studies were performed to determine whether antigens, which are adsorbed to aluminium-containing adjuvants, can be displaced by interstitial proteins. It was found that when previously adsorbed model antigens such as lysozyme or myoglobin were exposed to interstitial proteins such as albumin or fibrinogen that extensive displacement occurred. A factorial study of the displacement of myoglobin from aluminium hydroxide adjuvant by albumin was performed. The displacement occurred rapidly with the majority of the displacement occurring in less than 15 min. Whether the concentration of the adsorbed myoglobin was above or below the adsorptive capacity of the aluminium hydroxide adjuvant affected the amount which could be displaced. Less myoglobin was displaced when the concentration was below the adsorptive capacity. The age of the model vaccine (1, 2 or 7 days) prior to exposure to the interstitial protein did not influence the amount of myoglobin that was displaced. The affinity of model antigens and interstitial proteins for aluminium hydroxide or aluminium phosphate adjuvant was characterized by the adsorption coefficient in the Langmuir equation. In every case studied, the protein having the larger adsorption coefficient was able to displace the protein with the smaller adsorption coefficient.
...
PMID:The in vitro displacement of adsorbed model antigens from aluminium-containing adjuvants by interstitial proteins. 1043 58

Peptides and proteins were separated by capillary electrophoresis (CE) in fused-silica capillaries coated with an irreversibly adsorbed monolayer of derivatized polystyrene nanoparticles. Whereas phosphate buffer, pH 3.10, enabled the highly efficient separation of basic proteins with plate counts up to 1,400,000 m-1, volatile buffer components such as formic acid or acetic acid titrated with ammonia to the desired pH had to be used for the direct coupling of CE with electrospray ionization mass spectrometry (ESI-MS). Compared to 40 mM phosphoric acid-sodium hydroxide, pH 3.10, a background electrolyte containing 125 mM formic acid-ammonia, pH 4.00, was shown to yield equivalent separation efficiency. Investigation of the influence of buffered electrolytes on the ESI-MS signal of lysozyme at pH 2.70-4.00 showed that the charge state distribution shifted to lower charge states at higher pH with a concomitant five-fold decrease in signal intensity of the most abundant signal. The presence of trifluoroacetic acid in the background electrolyte greatly increased the level of baseline noise and completely inhibited the observation of any mass signals related to proteins. Full scan spectra could be acquired from 50-500 fmol amounts of proteins during coupled CE-ESI-MS utilizing 100-125 mM formic acid-ammonia, pH 3.10. However, compared to UV detection, considerable band broadening is observed with ESI-MS detection which is mainly attributed to column overloading, band spreading in the interface, and scanning data acquisition. Finally, the major whey proteins beta-lactoglobulin A, beta-lactoglobulin B, and alpha-lactalbumin were identified in a whey drink by comparison of molecular masses determined by CE-ESI-MS to molecular masses calculated from the amino acid sequence.
...
PMID:Evaluation of volatile eluents and electrolytes for high-performance liquid chromatography-electrospray ionization mass spectrometry and capillary electrophoresis-electrospray ionization mass spectrometry of proteins. II. Capillary electrophoresis. 1044 42


<< Previous 1 2 3 4 5 6 Next >>

---