Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.2.1.17 (lysozyme)
 21,489 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Aqueous two-phase systems composed of ethylene oxide/propylene oxide random co-polymers, EO30/PO70 or Ucon (EO50/PO50), in the top phase and dextran T500 in the bottom phase, have been studied. The cloud point diagram for EO30/PO70 in water solution was determined. EO30/PO70 has a cloud point of 32 degrees C at a concentration of 10% (w/w). The phase diagram for the system EO30/PO70-dextran T500-water was determined. Salt effects have been studied on the partitioning of two model proteins, bovine serum albumin and hen egg white lysozyme, in EO30/PO70-dextran and Ucon-dextran systems. Ions with different hydrophobicity, i.e., with different position in the Hofmeister or lyotropic series, were investigated with reference to their effect on protein partition. The counterion hydrophobicity was shown to have a strong influence on the partitioning of BSA and lysozyme. Most extreme partitioning was obtained with hydrophobic (chaotropic) ions like CIO4- and I-. A comparison of protein partitioning between PEG-dextran and EO30/PO70-dextran has been done. A more extreme protein partitioning was obtained in the EO30/PO70-dextran containing system. Temperature-induced phase separation was studied with EO30/PO70 at 45 degrees C. Both BSA and lysozyme were completely partitioned to the water phase formed above the cloud point of EO30/PO70. Model calculations, based on Flory-Huggins theory of polymer solutions, have been done which could reproduce the salt effect on the protein partitioning in aqueous-two phase system.
 ...
PMID:Effects of ions on partitioning of serum albumin and lysozyme in aqueous two-phase systems containing ethylene oxide/propylene oxide co-polymers. 876 33

Various assays of classical PEG-assisted transformation as well as electrotransformation of Streptomyces parvulus IMET41380 and Streptomyces vinaceus NCIB8852 are described. Contrary to the so far reported assays of electrotransforming Streptomyces strains, electroporation in S. parvulus and S. vinaceus was carried out on intact cells, without any lysozyme treatment. In these two strains, the classical PEG-assisted transformation of protoplasts does not work efficiently (10(3) to 10(4) transformants per micrograms of pIJ702 DNA) and electrotransformation gives 10 to 100 times higher yields (10(5) transformants per micrograms of pIJ702 DNA). The electroporation method described here is not applicable to other Streptomyces strains (S. lividans or S. coelicolor).
 ...
PMID:Electroporation of intact cells of Streptomyces parvulus and Streptomyces vinaceus. 922 45

Capillary electrophoresis (CE) was investigated for characterizing poly(ethylene glycol) (PEG) attachment ("PEGylation") and PEG removal ("dePEGylation") of proteins. Lysozyme was used as a model protein because it is one of the best understood enzymes, has a high ionic strength (high pI value; thus making it suitable for CE), and has a tertiary structure that is known with high resolution. Several PEG derivatives, both hydrolytically degradable and nondegradable and with varying reactivities toward amino groups, were used to couple to amino groups (six epsilon-amino and one alpha-amino) on the surface of the protein. Capillary electrophoresis was found to be useful in following both the PEGylation and dePEGylation of lysozyme. Capillary electrophoresis separation is based on the size of the conjugate, which is determined by the number and molecular weight of the PEG that is attached. Baseline resolution was obtained between the peaks for each PEG chain attached per protein molecule ("PEGmers") for PEG molecular weights >5000, although individual PEGmers could be recognized at lower molecular weights without baseline separation. Highly modified lysozyme showed complete inactivation, but when released from the degradable PEG, regained >60% of the original in vitro activity. The sites of PEGylation were determined using a tryptic map of the modified and unmodified protein. Typically, peptide fragments are separated by reversed-phase HPLC, but we show that CE can provide a complementary separation technique for determining sites of PEGylation. Capillary electrophoresis has advantages of high efficiency separations, rapid analysis, and ease of use.
 ...
PMID:Attachment of degradable poly(ethylene glycol) to proteins has the potential to increase therapeutic efficacy. 981 3

Covalent linkage of poly(ethylene glycol) (PEG) to drug molecules results in water-soluble conjugates with altered bioavailability, pharmacokinetics, immunogenic properties, and biological activities. For drugs bearing one or more amino groups, reductive amination is a potentially useful method for conjugation to PEG. PEG acetaldehyde has been used for this purpose, but its ease of polymerization under certain conditions and its susceptibility to air oxidation have caused some problems in its application. A simple and reliable method for preparation and use in reductive amination of PEG acetaldehyde hydrate generated in situ by hydrolysis of PEG acetaldehyde diethylacetal is demonstrated. PEG acetaldehyde diethylacetal is prepared in high yield and purity by reaction of PEG with chlorodiethylacetal in dioxane in the presence of finely powdered sodium hydroxide under heterogeneous conditions. PEG acetaldehyde hydrate is generated in solution by hydrolysis in aqueous acids. Solutions of the hydrate may be used directly, in conjunction with sodium cyanoborohydride, to effect reductive amination. We demonstrate application of these methods in PEGylation of lysozyme and chitosan to form water-soluble methoxy poly(ethylene glycol) (mPEG) derivatives and PEG-chitosan hydrogels.
 ...
PMID:Reductive amination using poly(ethylene glycol) acetaldehyde hydrate generated in situ: applications to chitosan and lysozyme. 981 4

A new method of formation of noncovalent complexes between poly(ethylene glycol) (PEG) and proteins (alpha-chymotrypsin (ChT), lysozyme, bovine serum albumin) under high pressure has been developed. The existence of polymer in complexes was proved using 3H-labeled PEG. Complexes between PEG and ChT were studied in detail. It was shown that the composition of complexes (the number of polymer chains per ChT molecule) depends on the molecular mass of PEG and decreases with the increase of molecular mass from 300 to 4000. At the same time, the portion of the protein (wt. %) in complexes does not depend on the molecular mass of incorporated PEG and corresponds to approximately 70 wt. %. It was shown that kinetic constants for enzymatic hydrolysis of N-benzoyl-L-tyrosine ethyl ester and azocasein catalyzed by the PEG-ChT complexes are identical to the corresponding values for the native ChT. The conformational properties of ChT in complexes were studied by circular dichroism. It was shown that the enzyme in complexes fully retains its secondary structure. The estimation of steric availability of PEG polymer chains in complexes was evaluated by the complexation with alpha-cyclodextrin (CyD). It was shown that in contrast to free PEG, only part (approximately 10%) of PEG polymer chains in PEG--ChT complexes participate in the complexation with CyD. Hence, the complexation of PEG with ChT proceeds by means of multipoint interaction with surface groups of the protein globule in a region far from the active site of the enzyme and results in the significant decrease in the mobility of polymer chains.
 ...
PMID:Noncovalent complexes between poly(ethylene glycol) and proteins. 986 73

During recombinant Escherichia coli fermentation with high expression levels, inclusion bodies are often formed. Aqueous two-phase systems have been used in the presence of urea for the initial recovery steps. To investigate phase behavior of such systems we determined phase diagrams of poly(ethylene glycol) (PEG)/sodium sulfate/urea/water and PEG/dextran T-500 (DEX)/urea/phosphate buffer/water at different concentrations of urea and different molecular weight of PEG. PEG/Na2SO4 aqueous two-phase systems could be obtained including up to 30% w/w urea at 25 degrees C and PEG/dextran T-500 up to 35% w/w urea. The binodial was displaced toward higher concentrations with increasing urea concentrations. The partition coefficient of urea was near unity. An unstable mutant of T4-lysozyme with an amino acid replacement in the core (V149T) was used to analyze the effect of phase components on the conformation of the enzyme. We showed that partitioning of tryptophan was not dependent on the concentration of urea in the phase system.
 ...
PMID:Aqueous two-phase systems containing urea: influence on phase separation and stabilization of protein conformation by phase components. 1035 68

A novel polypeptide hydrogel has been synthesized by crosslinking poly(L-glutamic acid) (PLG) with poly(ethylene glycol) (PEG). The PLG-PEG hydrogel was shown to be highly hydrophilic, and the extent of swelling varied with pH, increasing at higher ionization of the PLG. Aside from electrostatic effects, such as ion-ion repulsion and internal ion osmotic pressure, circular dichroism studies showed that swelling response to pH also is affected by secondary structural attributes associated with the polypeptide backbone. Modification of the polypeptide by changing its hydrophobicity and degree of ionization was an effective method for altering the overall extent of pH-responsive swelling. Rapid de-swelling (contraction) was observed when the PLG-PEG hydrogel was transferred from high to low pH buffer solution, and this swelling/de-swelling behavior was reversible over repeated cycles. Drug release from swollen hydrogels was examined using the model protein lysozyme. Rapid de-swelling of the hydrogel was found to be an effective means of facilitating lysozyme release. The crosslinking of synthetic polypeptides with PEG appears to be a highly versatile approach to the preparation of pH-responsive biodegradable hydrogels.
 ...
PMID:A pH- and ionic strength-responsive polypeptide hydrogel: synthesis, characterization, and preliminary protein release studies. 1049 96

The properties of a series of multiblock copolymers, based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(butylene terephthalate) (PBT) blocks were investigated with respect to their application as a matrix for controlled release of proteins. The degree of swelling, Q, of the copolymers increased with increasing PEG content and with increasing molecular weight of the PEG segment. Within the composition range tested, Q varied from 1.26 for polymers with PEG segments of 600 g/mol and a PBT content of 60 weight.% up to 3.64 for polymers with PEG segments of 4000 g/mol and a PEG/PBT weight ratio of 80:20. Equilibrium stress (compression)-strain measurements were performed in order to estimate mesh sizes. The mesh size of the copolymers ranged from 38 to 93 A, which was experimentally confirmed by diffusion of vitamin B(12) (hydrodynamic diameter d(h)=16.6 A), lysozyme (d(h)=41 A) and bovine serum albumin (d(h)=72 A). The in vitro degradation of PEG/PBT copolymers with a PEG block length of 1000 g/mol and PEG/PBT weight ratios of 70:30, 60:40 and 40:60 was studied. Matrices with increasing PEG contents exhibited a faster weight loss in phosphate-buffered saline (pH 7.4) at 37 degrees C. Over a degradation period of 54 days, M(n) decreased by about 35-45%, while the composition of the matrices, determined by NMR, remained almost constant.
 ...
PMID:A controlled release system for proteins based on poly(ether ester) block-copolymers: polymer network characterization. 1052 76

In this study we show that proteins can be partitioned and separated in a novel aqueous two-phase system composed of only one polymer in water solution. This system represents an attractive alternative to traditional two-phase systems which uses either two polymers (e.g., PEG/dextran) or one polymer in high-salt concentration (e.g., PEG/salt). The polymer in the new system is a linear random copolymer composed of ethylene oxide and propylene oxide groups which has been hydrophobically modified with myristyl groups (C(14)H(29)) at both ends (HM-EOPO). This polymer thermoseparates in water, with a cloud point at 14 degrees C. The HM-EOPO polymer forms an aqueous two-phase system with a top phase composed of almost 100% water and a bottom phase composed of 5-9% HM-EOPO in water when separated at 17-30 degrees C. The copolymer is self-associating and forms micellar-like structures with a CMC at 12 microM (0.01%). The partitioning behavior of three proteins (lysozyme, bovine serum albumin, and apolipoprotein A-1) in water/HM-EOPO two-phase systems has been studied, as well as the effect of various ions, pH, and temperature on protein partitioning. The amphiphilic protein apolipoprotein A-1 was strongly partitioned to the HM-EOPO-rich phase within a broad-temperature range. The partitioning of hydrophobic proteins can be directed with addition of salt. Below the isoelectric point (pI) BSA was partitioned to the HM-EOPO-rich phase and above the pI to the water phase when NaClO(4)was added to the system. Lysozyme was directed to the HM-EOPO phase with NaClO(4), and to the water phase with Na-phosphate. The possibility to direct protein partitioning between water and copolymer phases shows that this system can be used for protein separations. This was tested on purification of apolipoprotein A-1 from human plasma and Escherichia coli extract. Apolipoprotein A-1 could be recovered in the HM-EOPO-rich phase and the majority of contaminating proteins in the water phase. By adding a new water/buffer phase at higher pH and with 100 mM NaClO(4), and raising the temperature for separation, the apolipoprotein A-1 could be back-extracted from the HM-EOPO phase into the new water phase. This novel system has a strong potential for use in biotechnical extractions as it uses only one polymer and can be operated at moderate temperatures and salt concentrations and furthermore, the copolymer can be recovered.
 ...
PMID:Thermoseparating water/polymer system: a novel one-polymer aqueous two-phase system for protein purification. 1057 95

The efficiency and reproducibility of DNA extraction from soil was tested for variations in lytic and purification treatments and their effect on yield and purity of DNA. The extraction yield was improved by increasing the concentration of EDTA or monovalent ions in isolation buffers, by the introduction of mechanical lysis treatments, and by the use of ethanol precipitation in place of PEG precipitation. Purity was improved using buffers with decreasing concentration of EDTA or by reducing the ionic strength of the buffer, and by all mechanical treatments. No lytic treatment was efficient on its own, the highest purity was achieved using Crombach buffer and a combination of bead-beating with lysozyme and SDS lysis followed by potassium acetate and PEG precipitation, phenol/chloroform purification, isopropanol precipitation, and spermine-HCl precipitation. Sonication sheared the DNA more than bead-beating. Lysozyme and SDS lysis without any mechanical treatments allowed isolation of larger fragments (40-90 kb). Denaturing gradient gel electrophoresis analysis of DNA isolated using a range of lytic treatments revealed alterations in band patterns which might reflect differences in the efficiency of lytic treatments.
 ...
PMID:Comparison of different methods for the isolation and purification of total community DNA from soil. 1057 2


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>