Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.1.3.1 (alkaline phosphatase)
 47,916 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The creation of novel bone substitutes requires a detailed understanding of the interaction between cells and materials. This study was designed to test certain polymers, specifically poly(caprolactone) (PCL), poly(D,L-lactic-CO-glycolic acid) (PLGA), and combinations of these polymers for their ability to support bone marrow stromal cell proliferation and differentiation. Bone marrow stromal cells were cultured from New Zealand White rabbits and were seeded onto glass slides coated with a thin layer of PCL, PLGA, and combinations of these two polymers in both a 40:60 and a 10:90 ratio. Growth curves were compared. At the end of 2 weeks, the cells were stained for both matrix mineralization and alkaline phosphatase activity. There was no statistically significant difference in growth rate of the cells on any polymer or polymer combination. However, there was a striking difference in Von Kossa staining and alkaline phosphatase staining. Cells on PCL did not show Von Kossa staining or alkaline phosphatase staining. However, in the 40:60 and 10:90 blends, there was both positive Von Kossa and alkaline phosphatase staining. These data indicate that PCL alone may not be a satisfactory material for the creation of a bone substitute. However, it may be used in combination with PLGA for the creation of a bone substitute material.
 ...
PMID:Characterization of osteoblast-like behavior of cultured bone marrow stromal cells on various polymer surfaces. 1095 66

Tissue transglutaminase (tTG) has recently been established as a novel cell surface adhesion protein that binds with high affinity to fibronectin in the pericellular matrix. In this study, we have made use of this property to enhance the biocompatibility of poly(epsilon-caprolactone) (PCL), a biomaterial currently used in bone repair. Poly(epsilon-caprolactone) discs were first coated with fibronectin and then tTG. The surface localisation of the two proteins was confirmed using ELISA and the tTG shown to be active on the surface by incorporation of biotin cadaverine into the fibronectin coating. When human osteoblasts (HOBs) were seeded onto the coated polymer surfaces in serum free medium, the surface coated with fibronectin and then tTG showed an increase in the spreading of the cells as compared to the surface coated with fibronectin alone, when analysed using environmental scanning electron microscopy. The presence of tTG had no effect on HOB cell differentiation when analysed by determining alkaline phosphatase activity. The use of tTG as a novel adhesion protein in this way may therefore have considerable potential in forming a stable tissue/biomaterial interface for application in medical devices.
 ...
PMID:Involvement of tissue transglutaminase in the stabilisation of biomaterial/tissue interfaces important in medical devices. 1182 48

Poly(epsilon-caprolactone) (PCL) and biphasic calcium phosphate (CaP) composite membranes were prepared for use in tissue regeneration by a novel solvent casting-pressing method. An antibiotic drug, tetracycline hydrochloride (TCH), was entrapped within the membranes to investigate the efficacy of the material as a drug delivery system. The CaP powders were varied in amount (0-50 wt %) and in powder characteristics by heat treating at different temperatures, and their effects on the mechanical and biological properties and drug release of the membranes were examined. With CaP addition up to 30 wt %, the elastic modulus of the membranes was enhanced much due to the rigidity of CaP. While the tensile strength and elongation rate decreased gradually with CaP addition because the CaP powders acted as a failure source. The osteoblast-like cells cultured on the CaP-PCL composite membranes exhibited significant improvements in proliferation and alkaline phosphatase (ALP) activity compared to pure PCL and culture plastic control, indicating excellent cell viability and functional activity. The TCH drugs were released from the PCL and CaP-PCL membranes in a similar fashion; an initial burst followed by a reduced release rate. The initial burst effect diminished much by the addition of CaP powders. The CaP addition increased the drug release rate after an initial period, and this was attributed to the high water uptake capacity and dissolution of the CaP containing membranes. Compared to the composite membranes containing heat-treated CaP powders, those with as-precipitated ones had higher dissolution and drug releases. These observations on mechanical properties and cellular responses as well as on drug release profiles suggested that the CaP-PCL composite membranes are potentially applicable to tissue regeneration and drug delivery system.
 ...
PMID:Effect of biphasic calcium phosphates on drug release and biological and mechanical properties of poly(epsilon-caprolactone) composite membranes. 1529 21

The osteogenic potential of mesenchymal stem cells (MSCs) cultured on poly(lactide-co-glycolide) (PLGA) or poly(caprolactone) (PCL), two widely used polymeric biomaterials that have been reported to differentially support osteogenic differentiation, was compared in these studies. Here we report that MSCs cultured in 3-D PLGA scaffolds for up to 5 weeks significantly upregulate osteocalcin gene expression levels. By contrast, osteocalcin expression was markedly downregulated in 3-D PCL-based constructs over the same time course. We hypothesized that differential adsorption of extracellular matrix (ECM) proteins present in serum-containing culture medium and subsequent differences in integrin-mediated adhesion are responsible for these differences, and tested this hypothesis using thin (2-D) polymeric films. Supporting this hypothesis, significant amounts of fibronectin and vitronectin deposited onto both materials in serum-containing osteogenic media, with type-I collagen present in lower amounts. Adhesion-blocking studies revealed that MSCs adhere to PCL primarily via vitronectin, while type-I collagen mediates their attachment to PLGA. These adhesive mechanisms correlated with higher levels of alkaline phosphatase (ALP) activity after 2 weeks of monolayer culture on PLGA versus PCL. These data suggest that the initial adhesion of MSCs to PLGA via type-I collagen fosters osteogenesis while adhesion to PCL via vitronectin does not, and stress the need for an improved molecular understanding of cell-ECM interactions in stem cell-based therapies.
 ...
PMID:Adhesion of mesenchymal stem cells to polymer scaffolds occurs via distinct ECM ligands and controls their osteogenic differentiation. 1660 24

Segmented polyurethanes have been used extensively in implantable medical devices, but their tunable mechanical properties make them attractive for examining the effect of biomaterial modulus on engineered musculoskeletal tissue development. In this study, a family of segmented degradable poly(esterurethane urea)s (PEUURs) were synthesized from 1,4-diisocyanatobutane, a poly(epsilon-caprolactone) (PCL) macrodiol soft segment and a tyramine-1,4-diisocyanatobutane-tyramine chain extender. By systematically increasing the PCL macrodiol molecular weight from 1100 to 2700Da, the storage modulus, crystallinity and melting point of the PCL segment were systematically varied. In particular, the melting temperature, T(m), increased from 21 to 61 degrees C and the storage modulus at 37 degrees C increased from 52 to 278MPa with increasing PCL macrodiol molecular weight, suggesting that the crystallinity of the PCL macrodiol contributed significantly to the mechanical properties of the polymers. Bone marrow stromal cells were cultured on rigid polymer films under osteogenic conditions for up to 21 days. Cell density, alkaline phosphatase activity, and osteopontin and osteocalcin expression were similar among PEUURs and comparable to poly(d,l-lactic-coglycolic acid). This study demonstrates the suitability of this family of PEUURs for tissue engineering applications, and establishes a foundation for determining the effect of biomaterial modulus on bone tissue development.
 ...
PMID:Synthesis and characterization of segmented poly(esterurethane urea) elastomers for bone tissue engineering. 1741 51

Nanofibrous glass with a bioactive composition was added to a degradable polymer poly(epsilon-caprolactone) (PCL) to produce a nanocomposite in thin membrane form ( approximately 260 microm). The bioactivity and osteoblastic responses of the nanocomposite membrane were examined and compared with those of a pure PCL membrane. Glass nanofibers with diameters in the range of hundreds of nanometers were added to a PCL solution at 20 wt.%, and the mixture was stirred vigorously and air dried. The obtained nanocomposite membrane showed that many chopped glass nanofibers formed by the mixing step were embedded uniformly into the PCL matrix. The nanocomposite membrane induced the rapid formation of apatite-like minerals on the surface when immersed in a simulated body fluid. Murine-derived osteoblastic cells (MC3T3-E1) grew actively over the nanocomposite membrane with cell viability significantly improved compared with those on the pure PCL membrane. Moreover, the osteoblastic activity, as assessed by the expression of alkaline phosphatase, was significantly higher on the nanocomposite membrane than on the pure PCL membrane. The currently developed nanocomposite of the bioactive glass-added PCL might find applications in the bone regeneration areas such as the guided bone regeneration (GBR) membrane.
 ...
PMID:Bioactivity improvement of poly(epsilon-caprolactone) membrane with the addition of nanofibrous bioactive glass. 1817 36

Bone cells and their precursors are sensitive to changes in their biomechanical environment. The importance of mechanical stimuli has been observed in bone homeostasis and osteogenesis, but the mechanisms responsible for osteogenic induction in response to mechanical signals are poorly understood. We hypothesized that compressive forces could exert an osteogenic effect on osteoblasts and act in a dose-dependent manner. To test our hypothesis, electrospun poly(epsilon-caprolactone) (PCL) scaffolds were used as a 3-D microenvironment for osteoblast culture. The scaffolds provided a substrate allowing cell exposure to levels of externally applied compressive force. Pre-osteoblasts adhered, proliferated and differentiated in the scaffolds and showed extensive matrix synthesis by scanning electron microscopy (SEM) and increased Young's modulus (136.45+/-9.15 kPa) compared with acellular scaffolds (24.55+/-8.5 kPa). Exposure of cells to 10% compressive strain (11.81+/-0.42 kPa) resulted in a rapid induction of bone morphogenic protein-2 (BMP-2), runt-related transcription factor 2 (Runx2), and MAD homolog 5 (Smad5). These effects further enhanced the expression of genes and proteins required for extracellular matrix (ECM) production, such as alkaline phosphatase (Akp2), collagen type I (Col1a1), osteocalcin/bone gamma carboxyglutamate protein (OC/Bglap), osteonectin/secreted acidic cysteine-rich glycoprotein (ON/Sparc) and osteopontin/secreted phosphoprotein 1 (OPN/Spp1). Exposure of cell-scaffold constructs to 20% compressive strain (30.96+/-2.82 kPa) demonstrated that these signals are not osteogenic. These findings provide the molecular basis for the experimental and clinical observations that appropriate physical activities or microscale compressive loading can enhance fracture healing due in part to the anabolic osteogenic effects.
 ...
PMID:Compressive forces induce osteogenic gene expression in calvarial osteoblasts. 1819 Nov 37

Degradable synthetic polymers with a nanofibrous structure have shown great promise in populating and recruiting cells for the reconstruction of damaged tissues. However, poor cell affinity and lack of bioactivity have limited their potential usefulness in bone regeneration. We produced polymeric nanofiber poly(epsilon-caprolactone) (PCL) with its surface mineralized with bone-like apatite for use as bone regenerative and tissue engineering matrices. PCL was first electrospun into a nanofibrous web, and the surface was further mineralized with apatite following a series of solution treatments. The surface of the mineralized PCL nanofiber was observed to be almost fully covered with nanocrystalline apatites. Through mineralization, the wettability of the nanofiber matrix was greatly improved. Moreover, the murine-derived osteoblastic cells were shown to attach and grow actively on the apatite-mineralized nanofibrous substrate. In particular, the mineralized PCL nanofibrous substrate significantly stimulated the expression of bone-associated genes, including Runx2, collagen type I, alkaline phosphatase, and osteocalcin, when compared with the pure PCL nanofiber substrate without mineralization. The currently developed polymer nanofibrous web with the bioactive mineralized surface is considered to be potentially useful as bone regenerative and tissue engineering matrices.
 ...
PMID:Apatite-mineralized polycaprolactone nanofibrous web as a bone tissue regeneration substrate. 1835 62

To demonstrate the transplantation of drug-secreting cells with immunoprotection, a biodegradable delivery device combining two nanoporous capsules is developed using secretory alkaline phosphatase gene (SEAP) transfected mouse embryonic stem (mES) cells as a model system. The outer capsule is a poly (ethylene glycol) (PEG)-coated poly (epsilon-caprolactone) (PCL) chamber covered with a PEG grafted PCL nanoporous membrane made by phase inversion technique. SEAP gene transfected mES cells encapsulated in alginate-poly-L-lysine (AP) microcapsules are placed in the PCL capsule. Both nanoporous capsules showed good immunoprotection in the IgG solution. In microcapsules, mES cells could form a spheroid embryonic body (EB) and grow close to the microcapsule size. The secreted SEAP from encapsulated mES cells increased gradually to a maximum value before reaching a steady level, following the cell growth pattern in the microcapsule. Without microcapsules, mES cells only formed a monolayer in the large PCL capsule. The secreted SEAP release was very low. The integrated device showed a similar cell growth pattern to that in microcapsules alone, while the SEAP release rate could be regulated by the pore size of the large capsule. This integrated device can achieve multi-functionalities for cell-based therapy, i.e. a 3-D microenvironment provided by microcapsules for cell growth, superior immunoprotection and controllable release performance provided by the two nanoporous membranes, and good fibrosis prevention by PEG surface modification of the large capsule.
 ...
PMID:A biodegradable, immunoprotective, dual nanoporous capsule for cell-based therapies. 1869 95

Critical-sized defects in bone, whether caused by cancer tumor resection, trauma, or selective surgery have in many cases presented insurmountable challenges to the current gold-standard treatment for bone repair. The primary purpose of a tissue-engineered scaffold is to incite and promote the natural healing process of bone, which does not occur in critical-sized defects. In this work, a solvent-free template synthesis technique was utilized to fabricate uniform arrays of substrate-bound poly(epsilon-caprolactone) (PCL) nanowires. Biodegradation of PCL nanowire surfaces was characterized using scanning electron microscopy (SEM) and matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry. Rat bone marrow-derived mesenchymal stem cells (MSCs) were employed to assess short-term biocompatibility and long-term bioactivity of nanowire surfaces. Short-term cell studies indicated that PCL nanowire surfaces supported enhanced cell adhesion and viability compared with control surfaces. MSCs seeded on nanowire surfaces also displayed increased levels of alkaline phosphatase (ALP) after 1, 2, and 3 weeks in culture. Calcium-phosphate mineralization was substantially accelerated on nanowire surfaces compared to control surfaces as indicated through calcium staining, von Kossa staining, SEM, and electron dispersive spectroscopy (EDS). Increased levels of inter- and extracellular levels of osteocalcin and osteopontin were observed on nanowire surfaces using immunofluorescence techniques after 3 weeks of culture. Considering the simplicity of the presented fabrication technique, capacity for solvent-free encapsulation of bioactive molecules or particles, and enhanced MSC performance on nanowire surfaces, this work presents an excellent foundation for the development of 3-D scaffolds for bone tissue regeneration.
 ...
PMID:Biodegradable poly(epsilon-caprolactone) nanowires for bone tissue engineering applications. 1901 62


1 2 3 4 5 6 7 8 9 10 Next >>