Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.1.3.1 (alkaline phosphatase)
 47,916 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The aim of this study was to examine the potential of immunoselected genetically modified human osteoprogenitors to form bone in vivo on porous PLA scaffolds. Human osteoprogenitors from bone marrow were selected using the antibody STRO-1 utilising a magnetically activated cell separation system. The STRO-1(+) fraction isolated 7% of nucleated marrow cells and increased fibroblastic colony formation by 300% and alkaline phosphatase activity by 190% over unselected marrow cell cultures. To engineer bone tissue, STRO-1(+) culture-expanded cells were transduced with AxCAOBMP-2, an adenovirus carrying the human BMP-2 gene, injected into diffusion chambers containing porous PLA scaffolds, and implanted in vivo. After 11 weeks the presence of bone mineral was observed by X-ray analysis and confirmed for mineral by von Kossa, as well as bone matrix composition by Sirius red staining, birefringence, and type I collagen immunohistochemistry. Bone formation in vivo indicates the potential of using immunoselected progenitor cells and ex vivo gene transfer with biodegradable scaffolds, for the development of protocols for the treatment of a wide variety of musculo-skeletal disorders.
 ...
PMID:Immunoselection and adenoviral genetic modulation of human osteoprogenitors: in vivo bone formation on PLA scaffold. 1243 71

This study was designed to determine if the surface modification of porous poly(lactic acid) (PLA) scaffolds would enhance osteogenic precursor cell (OPC) attachment, growth, and differentiation. A covalently grafted amino group (-NH(2)), poly(L-lysine) (PLL), and the peptide arginine-glycine-aspartic acid (RGD) were selected for the evaluation. The hypothesis was that surface modification would have a positive impact on cell-substratum interactions. The experiment was performed by OPC cells being placed on PLA films and scaffolds modified with NH(2), PLL, or RGD in tissue culture media. OPC attachment to PLA films was assessed after 24 h of incubation. The growth and differentiation of the adherent OPCs on porous PLA scaffolds were assessed after 14 and 28 days for alkaline phosphatase (APase) activity and calcium levels, both of which increase as OPCs differentiate into mature bone cells. All assays were accomplished in triplicate, and data were tested with post hoc orthogonal contrasts (i.e., Fisher's least significant difference) at p < or = 0.05. The PLA film surface-modified with RGD showed better OPC cell attachment than the other films. The cells on the PLA scaffolds surface-modified with RGD also exhibited an increase in APase activity and calcium levels in comparison with those on other scaffolds. This difference was apparent at both time intervals and was especially evident in the tissue culture media containing an osteogenic supplement. The results of this study indicate that modifying the surface of PLA polymer scaffolds with RGD enhances bone cell attachment and differentiation and may improve their ability to regenerate bone tissue more efficiently in wound models.
 ...
PMID:Porous polymer scaffolds surface-modified with arginine-glycine-aspartic acid enhance bone cell attachment and differentiation in vitro. 1257 73

Biodegradable polymers, such as poly(lactic acid) (PLA) and poly(lactic-coglycolic acid) (PLGA), are attractive materials for tissue engineering because of their degradative and mechanical properties, which permit scaffolds to be tailored to the individual requirements of different tissues. Although these materials support tissue development, their chemical properties offer no control of cell adhesion or function because their surfaces become immediately masked by adsorbing serum proteins when the materials come into contact with body fluids. Furthermore, adhesion proteins undergo conformational changes and a decrease in bioactivity when adsorbed to hydrophobic materials, such as PLA. To overcome these limitations, we modified the properties of PLA by synthesizing a diblock copolymer with poly(ethylene glycol) (PEG), which is known to reduce the amount of adsorbed proteins and to modify their conformation. By altering the PEG content of these diblock copolymers we were able to control the adsorption of adhesion proteins and, because cell adhesion takes place only in the presence of serum proteins, to control cell adhesion and cell shape. Marrow stromal cell differentiation to the osteoblastic phenotype was strongly improved on PEG-PLA compared with PLA, PLGA and tissue culture polystyrene and led to a 2-fold increase in alkaline phosphatase activity and mineralization.
 ...
PMID:Poly(D,L-lactic acid)-poly(ethylene glycol)-monomethyl ether diblock copolymers control adhesion and osteoblastic differentiation of marrow stromal cells. 1262 56

A new method to prepare PLA/CMP (poly-L-lactide/calcium metaphosphate) composite scaffolds was developed for effective bone tissue engineering. This novel sintering method is composed of pressing the mixture of PLA, CMP, and salt particles at 150 MPa for 3 min followed by heat treatment at 210 degrees C for 30 min. The scaffolds had a homogeneously interconnected porous structure without a skin layer, and they exhibited a narrower pore size distribution and higher mechanical strength in comparison with scaffolds made by a solvent casting method. The scaffolds were seeded by osteoblasts and cultured in vitro or implanted into nude mice subcutaneously for up to 5 weeks. The number of cells attached to and proliferated on the scaffolds at both in vitro and in vivo was in the order of; PLA by novel sintering < PLA/CMP by solvent casting < PLA/CMP by novel sintering. In addition, the alkaline phosphatase activity of and calcium deposition in the scaffolds explanted from mice were enhanced significantly for the scaffolds by novel sintering compared to them by solvent casting. The in vitro results agreed well with the in vivo data. Such a superior characteristic of the novel sintering method should have resulted from the fact that the CMP particles could contact directly with cells/tissues to stimulate the cell proliferation and osteogenic differentiation, while the CMP particles would be coated by polymers and hindered to interact with cells/tissues in the case of a solvent casting method. As the novel sintering method does not use any solvents it offers another advantage to avoid problems associated with solvent residue.
 ...
PMID:A poly(lactic acid)/calcium metaphosphate composite for bone tissue engineering. 1591 59

The aim of this investigation was to test the biocompatibility of three-dimensional bioresorbable foams made of poly(L-lactic acid) (PLA), alone or filled with hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP), with human primary osteoblasts, using a direct contact method. Porous constructs were processed by supercritical gas foaming, after a melt-extrusion of ceramic/polymer mixture. Three neat polymer foams, with pore sizes of 170, 310, and 600 microm, and two composite foams, PLA/5 wt% HA and PLA/5 wt% beta-TCP, were examined over a 4-week culture period. The targeted application is the bone tissue-engineering field. For this purpose, human fetal and adult bone cells were chosen because of their highly osteogenic potential. The association of fetal bone cells and composite scaffold should lead to in vitro bone formation. The polymer and composite foams supported adhesion and intense proliferation of seeded cells, as revealed by scanning electron microscopy. Cell differentiation toward osteoblasts was demonstrated by alkaline phosphatase (ALP) enzymatic activity, gamma-carboxylated Gla-osteocalcin production, and the onset of mineralization. The addition of HA or beta-TCP resulted in higher ALP enzymatic activity for fetal bone cells and a stronger production of Gla-osteocalcin for adult bone cells.
 ...
PMID:Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells. 1641 9

To investigate the effect of three kinds of polymeric scaffolds on attachment, proliferation and differentiation of bone marrow mesenchymal stem cells, the cells were different polymeric scaffolds of PLA-PEG, PLA, PLGA, respectively. The proliferation of cell was evaluated by cell count; the attachment and morphology of BMSCs were observed by SEM; and differentiation was detected by alkaline phosphatase activity, fluorescence, and RT-PCR methods. Results showed that the cells in PLGA group spread better among BMSCs adhered to the three polymeric scaffolds. The activity of ALP was detected after 3 days culture in these three groups. There were no significant differences between PLA-PEG and PLGA groups, but the activity of ALP was higher than PLA group. The gene expressions of osteocalicin and collagen I were also observed in the early culture time. Calcium nodes formation in these polymeric scaffolds were detected. BMSC spreading first, then overlapping growth and secretion of matrix around the bottom and surface of scaffolds were observed through SEM. In summary, PLA-PEG and PLGA are better polymeric scaffolds for the bone tissue engineering, compared with PLA.
 ...
PMID:[Effect of polymeric scaffolds on attachment and growth of bone marrow mesenchymal stem cells]. 1642 95

We performed a detailed examination of the isolation, characterization, and growth of human osteoblast cells derived from trabecular bone. We further examined the morphology, phenotypic gene expression, mineralization,and growth of these human osteoblasts on polyester polymers used for musculoskeletal tissue engineering. Polylactic-co-glycolic acid [PLAGA (85:15, 50:50, 75:25)], and poly-lactic acid (L-PLA, D,L-PLA) were examined. The osteoblastic expression of key phenotypic markers osteocalcin, alkaline phosphatase, collagen, and bone sialoprotein at 4 and 8 weeks was examined. Reverse transcription-polymerase chain reaction studies revealed that trabecular-derived osteoblasts were positive for all markers evaluated with higher levels expressed over long-term culture. These cells also revealed mineralization and maturation as evidenced by energy dispersive X-ray analysis and scanning electron microscopy. Growth studies on PLAGA at 50:50,75:25, and 85:15 ratios and PLA in the L and DL isoforms revealed that human osteoblasts actively grew, with significantly higher cell numbers attached to scaffolds composed of PLAGA 50:50 in the short term and PLAGA 85:15 in the long term compared with PLA (p < 0.05). We believe human cell adhesion among these polymeric materials may be dependent on differences in cellular integrin expression and extracellular matrix protein elaboration.
 ...
PMID:Human osteoblast cells: isolation, characterization, and growth on polymers for musculoskeletal tissue engineering. 1654 83

Despite the widespread role of transforming growth factor-beta3 (TGFbeta3) in wound healing and tissue regeneration, its long-term controlled release has not been demonstrated. Here, we report microencapsulation of TGFbeta3 in poly-d-l-lactic-co-glycolic acid (PLGA) microspheres and determine its bioactivity. The release profiles of PLGA-encapsulated TGFbeta3 with 50:50 and 75:25 PLA:PGA ratios differed throughout the experimental period. To compare sterilization modalities of microspheres, bFGF was encapsulated in 50:50 PLGA microspheres and subjected to ethylene oxide (EO) gas, radio-frequency glow discharge (RFGD), or ultraviolet (UV) light. The release of bFGF was significantly attenuated by UV light, but not significantly altered by either EO or RFGD. To verify its bioactivity, TGFbeta3 (1.35 ng/mL) was control-released to the culture of human mesenchymal stem cells (hMSC) under induced osteogenic differentiation. Alkaline phosphatase staining intensity was markedly reduced 1 week after exposing hMSC-derived osteogenic cells to TGFbeta3. This was confirmed by lower alkaline phosphatase activity (2.25 +/- 0.57 mU/mL/ng DNA) than controls (TGFbeta3- free) at 5.8 +/- 0.9 mU/mL/ng DNA (p < 0.05). Control-released TGFbeta3 bioactivity was further confirmed by lack of significant differences in alkaline phosphatase upon direct addition of 1.35 ng/mL TGFbeta3 to cell culture (p > 0.05). These findings provide baseline data for potential uses of microencapsulated TGFbeta3 in wound healing and tissue-engineering applications.
 ...
PMID:Sustained release of TGFbeta3 from PLGA microspheres and its effect on early osteogenic differentiation of human mesenchymal stem cells. 1657 87

Development of fibrous matrices of bioceramic-biopolymer nanocomposite offers great potential in the field of bone regeneration and tissue engineering. However, in order to produce electrospun fibers with homogeneous structure, it is essential for the ceramic powder to be fine and to remain stable in suspension. Herein, we developed a novel method whereby the bioceramic hydroxyapatite (HA) was kept in suspension in biopolymer poly(lactic acid) (PLA). The strategy was to introduce a surfactant hydroxysteric acid (HSA) between the hydrophilic HA powder and the hydrophobic chloroform-dissolved PLA. The HA nanopowder was dispersed effectively in HSA and mixed homogeneously with PLA. Continuous and uniform fibers were generated successfully with diameters of approximately 1-2 microm, and featured a well-developed nanocomposite structure of HA nanopowder-dispersed PLA. Initial cellular assays showed excellent cell attachment and proliferation and also enhanced expression of alkaline phosphatase at 7 days of culturing. The HA-PLA nanocomposite fibers may be potentially useful in tissue engineering applications, particularly as three-dimensional substrates for bone growth.
 ...
PMID:Electrospinning biomedical nanocomposite fibers of hydroxyapatite/poly(lactic acid) for bone regeneration. 1682 96

Biomedical nanocomposites constituted of bioactive ceramic and resorbable polymer have shown promise for the successful regeneration of bone tissues. We developed herein a novel nanocomposite made up of a bioactive glass in a nanofibrous form and a degradable synthetic polymer, poly(lactic acid) (PLA). The glass nanofiber with a bioactive composition was generated via an electrospinning process with an average diameter of approximately 320 nm. The nanofiber was homogenized with PLA solution at various concentrations (up to 35% nanofiber), followed by drying and thermal pressing to produce dense nanocomposites. The nanocomposites showed an internal morphology of uniformly dispersed nanofibers within the PLA matrix. The nanocomposites induced rapid formation of a hydroxycarbonate apatite layer on the surface under a simulated physiological medium. As the amount of bioactive nanofiber increased (from 5 to 25%), the in vitro bioactivity of the nanocomposite was improved. The osteoblast responses to the nanocomposites (compositions with 5 and 25% nanofiber) were assessed in terms of cell proliferation, differentiation, and mineralization. Osteoblasts attached and grew well on the nanocomposites and secreted collagen protein at initial culturing periods. The differentiation of cells, as assessed by the expression of alkaline phosphatase, was significantly improved on the nanocomposites as compared to those on pure PLA. Moreover, the mineralized product by the cells was observed to be significantly higher on the nanocomposites with respect to pure PLA. The newly developed nanocomposite constituted of bioactive nanofiber and degradable polymer is considered as a promising bone regeneration matrix with its excellent bioactivity and osteoblast responses.
 ...
PMID:Bioactivity and osteoblast responses of novel biomedical nanocomposites of bioactive glass nanofiber filled poly(lactic acid). 1787


<< Previous 1 2 3 4 5 6 Next >>