Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:3.1.3.1 (alkaline phosphatase)
47,916 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A sandwich electrochemical enzyme immunoassay with flow injection analysis for the model antigen mouse IgG has been developed with alkaline phosphatase as the enzyme label. The enzyme substrate, 4-aminophenyl phosphate and its enzymatic reaction product, 4-aminophenol have been studied by cyclic and hydrodynamic voltammetry. The determination of 4-aminophenol by flow injection analysis with electrochemical detection (FIAEC) has a linear range of 5.0 x 10(-8) to 1.0 x 10(-5) M, a detection limit of 2.4 x 10(-8) M, and a sample throughput of 72 samples/h. The detection limit is set by a background capacitance response, which depends on the ionic strength difference between the sample and the mobile phase. The sandwich immunoassay has been characterized with respect to substrate concentration for the enzymatic reaction, detection limit, dynamic range and sources of error. Mouse IgG can be determined with a detection limit of 0.81 pg ml-1 by a 30-min substrate incubation time and a six orders of magnitude linear dynamic range.
...
PMID:Solid-phase electrochemical enzyme immunoassay with attomole detection limit by flow injection analysis. 249 May 17

Visualization of immobilized antibodies can be achieved with scanning electrochemical microscopy (SECM) by saturation of the antigen binding sites with an alkaline phosphatase-antigen conjugate, which catalyzes hydrolysis of the redox-inactive 4-aminophenyl phosphate to the redox-active 4-aminophenol (PAP). PAP was detected in the collection mode at an amperometric SECM tip. The tip current reflects the density of active binding sites in the immobilized antibody layer. The application of this approach for immunosensing research has been demonstrated with the optimization of a covalent immobilization procedure of antibodies on glass. The special advantages and present limitations of the procedures are discussed.
...
PMID:Imaging of immobilized antibody layers with scanning electrochemical microscopy. 868 3

A screen-printed carbon electrode (SPCE) has been investigated as the base transducer for a disposable amperometric progesterone biosensor. The biorecognition element was a monoclonal sheep anti-progesterone antibody (mAb). This was immobilized onto the transducer by interaction with a layer of rabbit IgG which had been previously coated onto the SPCE; optimum conditions for these loadings were deduced experimentally. The device was employed in a competitive assay using alkaline phosphatase-labelled progester-one. Three possible substrates for the enzyme were considered, namely, phenyl phosphate, phenolphthalein phosphate and 4-aminophenol phosphate. Cyclic voltammetry and amperometry were carried out on the corresponding aromatic phenols and phenol itself was found to give the best electrochemical characteristics; consequently, phenyl phosphate was employed as the substrate. Chronoamperometry was used to measure the phenol produced by the reaction of bound enzyme-labelled progesterone and substrate. The chronoamperometric response was dependent on unlabelled progesterone over at least three orders of magnitude with a detection limit of about 1 x 10(-9) mol/dm3. This suggests that the device may have applications for the analysis of biological fluids.
...
PMID:Studies towards a disposable screen-printed amperometric biosensor for progesterone. 945 99

4-Aminophenyl phosphate (4-APP) and 1-naphthyl phosphate (1-NP) were compared as enzyme substrates for an amperometric milk progesterone biosensor utilising progesterone-conjugated alkaline phosphatase in a competitive immunoassay format. Cyclic voltammetry of the corresponding hydrolysis products, 4-aminophenol and 1-naphthol, at the surface of screen-printed carbon base transducers, uncoated or coated with anti-progesterone monoclonal antibody (mAb) showed well-defined anodic responses for both species, with the more sensitive being 4-aminophenol. Scan rate studies produced evidence that surface mAb could impede the diffusion of 4-aminophenol, but not 1-naphthol, toward the electrode surface. This was supported by computer simulation for the electrochemical rate constant (khet) using 4-aminophenol, which gave values at uncoated and mAb-coated electrodes of 6.5 x 10(-4) and 3.0 x 10(-4) cm s-1, respectively. The applied potential for oxidation of 4-aminophenol was 230 mV lower than for 1-naphthol. Nevertheless, by operating below +400 mV versus a saturated calomel reference electrode, it was possible to obtain a chronoamperometric signal for 1-naphthol in the absence of electrochemical interference from milk. Using mAb-coated SPCEs, calibration curves were obtained for progesterone in oestrus whole cow's milk spiked with standard concentrations over the range 0-50 ng/ml, using either 4-APP or 1NP as enzyme substrate. Precision values for triplicate sensors were 5.3-18.3% for 4-APP and 4.1-12.4% for 1-NP. An assay of real whole milk samples from different cows at various stages of the oestrus cycle produced correlations against a commercial EIA of r = 0.840 and 0.946 for 4-APP and 1-NP, respectively, 1-NP possesses the advantages over 4-APP of being inexpensive, easy to obtain and soluble (1-naphthol cf. 4-aminophenol) at high pH. From these observations, it is concluded that 1-NP is the preferred substrate for use with our proposed milk progesterone biosensor.
...
PMID:A comparison of 1-naphthyl phosphate and 4 aminophenyl phosphate as enzyme substrates for use with a screen-printed amperometric immunosensor for progesterone in cows' milk. 1045 17

A new procedure is described to deposit paramagnetic beads on surfaces to form microscopic agglomerates. By using surface-modified beads, microscopic structures with defined biochemical activity are formed. The shape and size of agglomerates were characterized by scanning electron microscopy (SEM), and the biochemical activity was mapped with scanning electrochemical microscopy (SECM). This approach is demonstrated using beads modified with anti-mouse antibodies (Ab). After allowing them to react with a conjugate of mouse IgG and alkaline phosphatase (ALP), the beads were deposited as agglomerates of well-defined size and shape. The biochemical activity was recorded in the generation-collection SECM mode by oxidizing 4-aminophenol formed in the ALP-catalyzed hydrolysis of 4-aminophenyl phosphate at the surface of the beads. The signal height correlated with both the amount of beads present in one agglomerate and the proportion of Ab binding sites saturated with the ALP mouse IgG conjugate. The feedback mode of the SECM was used to image streptavidin-coated beads after reaction with biotinylated glucose oxidase.
...
PMID:Spatially addressed deposition and imaging of biochemically active bead microstructures by scanning electrochemical microscopy. 1065 27

A bead based sandwich enzyme immunoassay coupled to electrochemical detection for ovalbumin has been developed. The enzyme label alkaline phosphatase was used to convert the substrate 4-aminophenyl phosphate to electroactive product 4-aminophenol. The detection was done in a microdrop by continuously monitoring the enzyme turnover with a rotating disk electrode. This reduces dilution of the enzyme product, a key to achieving low detection limits. The assay developed has a detection limit of 0.1 ng ml-1. Assay sensitivity in complex matrices such as food and serum was compared.
...
PMID:Small volume bead assay for ovalbumin with electrochemical detection. 1128 35

A microfluidic device for conducting electrochemical enzyme immunoassays is described. The new "lab-on-a-chip" protocol integrates precolumn reactions of alkaline phosphatase-labeled antibody (anti-mouse IgG) with the antigen (mouse IgG), followed by electrophoretic separation of the free antibody and antibody-antigen complex. The separation is followed by a postcolumn reaction of the enzyme tracer with the 4-aminophenyl phosphate substrate and a downstream amperometric detection of the liberated 4-aminophenol product Factors influencing the reaction, separation, and detection processes were optimized, and the analytical performance was characterized. An applied field strength of 256 V/cm results in free antibody and antibody-antigen complex migration times of 125 and 340 s, respectively. A remarkably low detection limit of 2.5 x 10(-16) g/mL (1.7 x 10(-18) M) is obtained for the mouse IgG model analyte. Such combination of a complete integrated immunoassay, an attractive analytical performance, and the distinct miniaturization/portability advantages of electrochemical microsystems offers considerable promise for designing self-contained and disposable chips for decentralized clinical diagnostics or on-site environmental testing.
...
PMID:Electrochemical enzyme immunoassays on microchip platforms. 1172 36

The two articles in this series are dedicated to bioaffinity electrodes with in situ detection of the product of the enzyme label after recognition by its conjugate immobilized on the electrode. Part 1 was devoted to direct electrochemical detection, whereas the present contribution deals with homogeneous chemical and enzymatic amplification of the primary electrochemical signal. The theoretical relationships that are established for these modes of amplification are applied to the avidin-biotin recognition in a system that involves alkaline phosphatase as enzyme label and 4-amino-2,6-dichloro-phenyl phosphate as substrate, generating 2,6-dichloro-4-aminophenol as electrochemically active product. Chemical amplification then results from the addition of NADH, which reduces the 2,6-dichloro-quinonimine resulting from the electrochemical oxidation of 2,6-dichloro-4-aminophenol. An increased amplification is obtained when the reduction of 2,6-dichloro-quinonimine involves diaphorase in solution with NADH as substrate. The excellent agreement between theoretical predictions and experimental data required a detailed theoretical analysis and the independent determination of the key kinetic parameters of the system. The theoretical analysis was extended to monolayer and multilayered films of auxiliary enzyme as well as to electrochemical amplification by means of closely spaced dual electrodes so as to offer a rational comparative panorama of the amplification capabilities of the various possible strategies. Confinement of the profile of the product, and/or its oxidized form, in the vicinity the electrode surface appears as a key parameter of amplification.
...
PMID:Theory and practice of enzyme bioaffinity electrodes. Chemical, enzymatic, and electrochemical amplification of in situ product detection. 1849 54

In this paper, we have critically evaluated the electrochemical behavior of the products of seven substrates of the enzyme label, alkaline phosphate, commonly used in electrochemical immunosensors. These products (and the corresponding substrates) include indigo carmine (3-indoyl phosphate), hydroquinone (hydroquinone diphosphate), 4-nitrophenol (4-nitrophenol phosphate), 4-aminophenol (p-aminophenyl phosphate), 1-naphthol (1-naphthyl phosphate), phenol (phenyl phosphate), and L-ascorbic acid (2-phospho-L-ascorbic acid). Cyclic voltammetry and amperometry of these products were carried out at glassy carbon (GC), screen-printed carbon (SPC) and gold (Au) electrodes, respectively. Among the products, L-ascorbic acid showed the most sensitive (24.8 microA cm(-2), 12.0 microA cm(-2), and 48.0 microA cm(-2) of 100 microM ascorbic acid at GC, SPC, and Au electrodes, respectively) and well-defined amperometric response at all electrodes used, making 2-phospho-l-ascorbic acid the best substrate in electrochemical detection involving an alkaline phosphatase (ALP) enzyme label. The 2-phospho-L-ascorbic acid is also commercially available and inexpensive. Therefore, it was the best choice for electrochemical detection using ALP as label. Using mouse IgG as a model, an ALP enzyme-amplified sandwich-type amperometric immunosensor was constructed. The immunosensor was designed by electropolymerization of o-aminobenzoic acid (o-ABA) conductive polymer on the surface of GC, SPC, and Au electrodes. The anti-mouse IgG was subsequently attached on the electrode surface through covalent bonding between IgG antibody and the carboxyl groups from poly(o-ABA). Using 2-phospho-L-ascorbic acid as a substrate, the poly(o-ABA)/Au immunosensor produced the best signal (about 297 times of current density response ratio between 1000 ng mL(-1) and 0 ng mL(-1) of mouse IgG), demonstrating that amperometric immunosensors based on a conducting polymer electrode system were sensitive to concentrations of the mouse IgG down to 1 ng mL(-1), with a linear range of 3-200 ng mL(-1) (S.D.<2; n=3), and very low non-specific adsorption.
...
PMID:Investigation of the enzyme hydrolysis products of the substrates of alkaline phosphatase in electrochemical immunosensing. 1858 1

Three-dimensional flow-through electrodes were fabricated using superporous agarose (SPA) and reticulated vitreous carbon (RVC) composite materials that were suitable as a platform for sandwich assays. These SPA-RVC composite electrodes were fabricated by fitting a SPA-RVC composite cylinder inside a graphite tube and subsequently fixing the graphite tube onto a polypropylene micropipette tip. The electrode design allows for ease in reagent/washing steps involved in sandwich assay protocols and could easily be made portable. The electrode materials were characterized with respect to pore-size distribution, total free volume, ligament and bulk densities of the RVC, and physical structural characteristics. Coulometric detection of redox molecules such as K(3)Fe(CN)(6) and 4-aminophenol was possible using SPA-RVC electrodes by the trapping of these redox molecules inside the SPA-RVC electrodes. Avidin affinity molecules were covalently immobilized onto the SPA matrix inside the RVC electrodes by periodate-activation followed by reductive amination. The amount of avidin immobilized inside the SPA-RVC electrodes was (5+/-0.06)x10(-11) mol, which was determined by saturating the avidin sites with biotinylated fluorescein (b-fluo) and subsequently determining the amount of immobilized b-fluo via a standard addition method using fluorescence spectroscopy. Non-specific binding of labeled enzymes such as biotinylated alkaline phosphatase (b-ALP) onto the SPA-RVC electrodes without avidin capture sites was determined to be less than 1% compared to the specific binding of b-ALP on avidinylated SPA-RVC electrodes.
...
PMID:Preparation and characterization of superporous agarose-reticulated vitreous carbon electrodes as platforms for electrochemical bioassays. 1860 32


1 2 3 Next >>

---