Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:3.1.3.1 (alkaline phosphatase)
47,916 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Implant surface roughness influences osteoblast proliferation, differentiation, and local factor production. Moreover, the responsiveness of osteoblasts to systemic hormones such as 1, 25-(OH)(2)D(3) is altered by the effects of surface roughness; on the roughest Ti surfaces the effects of roughness and 1, 25-(OH)(2)D(3) are synergistic. Prostaglandin E(2) (PGE(2)) appears to be involved in mediating the effects of surface roughness on the cells, as well as in the response to 1,25-(OH)(2)D(3). However, it is not yet known through which signaling pathways surface roughness exerts its effects on the response of osteoblasts to 1, 25-(OH)(2)D(3). The present study examined the potential role of protein kinase A (PKA), phospholipase A(2)(PLA(2)), and protein kinase C (PKC) in this process. MG63 osteoblast-like human osteosarcoma cells were cultured on cpTi disks with R(a) values of 0. 54 microm (PT), 4.14 microm (SLA), or 4.92 microm (TPS). PKA was inhibited by adding H8 to the cultures; similarly, PLA(2) was inhibited with quinacrine or activated with melittin, and PKC was inhibited with chelerythrine. Inhibitors or activators were included in the culture media through the entire culture period or for the last 24 h of culture. In addition, cultures were treated for 24 h with inhibitors or activators in the presence of 1,25-(OH)(2)D(3). The effects on cell number and alkaline phosphatase specific activity were determined after 24 h; PKC activity was determined after 9 min and at 24 h. Cell number was reduced on rough surfaces, and alkaline phosphatase activity was increased. 1,25-(OH)(2)D(3) had a synergistic effect with surface roughness on alkaline phosphatase. However, neither surface roughness nor 1,25-(OH)(2)D(3) had an effect on PKC. H8 treatment for 24 h inhibited cell number and alkaline phosphatase on all surfaces; however, when it was present throughout the culture period, the PKA inhibitor had no effect on cell number, but decreased alkaline phosphatase-specific activity. H8 reduced the 1,25-(OH)(2)D(3)-mediated effect on cell number and alkaline phosphatase. Quinacrine inhibited cell proliferation and alkaline phosphatase on all surfaces and further reduced the 1,25-(OH)(2)D(3)-dependent decreases in both parameters. Melittin had no effect when applied for 24 h and did not modify the 1,25-(OH)(2)D(3) effect; however, when present throughout the culture period, it caused a decrease in proliferation and an increase in enzyme activity. Chelerythrine, the PKC inhibitor, only inhibited cell proliferation when it was present throughout the entire culture period. However, it decreased alkaline phosphatase in cultures treated for 24 h, but increased enzyme activity when it was present for the entire culture period. The results indicate that surface roughness and 1,25-(OH)(2)D(3) both mediate their effects through PLA(2) which catalyzes the rate-limiting step in PGE(2) production. Further downstream, PGE(2) activates PKA. Surface roughness-dependent effects are also mediated through PKC, but only after the cells have reached confluence and are undergoing phenotypic maturation. The effect of surface roughness on responsiveness to 1,25-(OH)(2)D(3) is mediated through PLA(2)/PKA and not through PKC.
...
PMID:Surface roughness modulates the response of MG63 osteoblast-like cells to 1,25-(OH)(2)D(3) through regulation of phospholipase A(2) activity and activation of protein kinase A. 1044 25

In this study we assessed whether osteogenic cells respond in a differential manner to changes in surface roughness depending on their maturation state. Previous studies using MG63 osteoblast-like cells, hypothesized to be at a relatively immature maturation state, showed that proliferation was inhibited and differentiation (osteocalcin production) was stimulated by culture on titanium (Ti) surfaces of increasing roughness. This effect was further enhanced by 1,25-dihydroxyvitamin D3 [1,25(OH)2D3]. In the present study, we examined the response of three additional cell lines at three different maturation states: fetal rat calvarial (FRC) cells (a mixture of multipotent mesenchymal cells, osteoprogenitor cells, and early committed osteoblasts), OCT-1 cells (well-differentiated secretory osteoblast-like cells isolated from calvaria), and MLO-Y4 cells (osteocyte-like cells). Both OCT-1 and MLO-Y4 cells were derived from transgenic mice transformed with the SV40 large T-antigen driven by the osteocalcin promoter. Cells were cultured on Ti disks with three different average surface roughnesses (Ra): PT, 0.5 microm; SLA, 4.1 microm; and TPS, 4.9 microm. When cultures reached confluence on plastic, vehicle or 10(-7) M or 10(-8) M 1,25(OH)2D3 was added for 24 h to all of the cultures. At harvest, cell number, alkaline phosphatase-specific activity, and production of osteocalcin, transforming growth factor beta1 (TGF-beta1) and prostaglandin E2 (PGE2) were measured. Cell behavior was sensitive to surface roughness and depended on the maturation state of the cell line. Fetal rat calvarial (FRC) cell number and alkaline phosphatase-specific activity were decreased, whereas production of osteocalcin, TGF-beta1, and PGE2 were increased with increasing surface roughness. Addition of 1,25(OH)2D3 to the cultures further augmented the effect of roughness for all parameters in a dose-dependent manner; only TGF-beta1 production on plastic and PT was unaffected by 1,25(OH)2D3. OCT-1 cell number and alkaline phosphatase (SLA > TPS) were decreased and production of PGE2, osteocalcin, and TGF-beta1 were increased on SLA and TPS. Response to 1,25(OH)2D3 varied with the parameter being measured. Addition of the hormone to the cultures had no effect on cell number or TGF-beta1 production on any surface, while alkaline phosphatase was stimulated on SLA and TPS; osteocalcin production was increased on all Ti surfaces but not on plastic; and PGE2 was decreased on plastic and PT, but unaffected on SLA and TPS. In MLO-Y4 cultures, cell number was decreased on SLA and TPS; alkaline phosphatase was unaffected by increasing surface roughness; and production of osteocalcin, TGF-beta1, and PGE2 were increased on SLA and TPS. Although 1,25(OH)2D3 had no effect on cell number, alkaline phosphatase, or production of TGF-beta1 or PGE2 on any surface, the production of osteocalcin was stimulated by 1,25(OH)2D3 on SLA and TPS. These results indicate that surface roughness promotes osteogenic differentiation of less mature cells, enhancing their responsiveness to 1,25(OH)2D3. As cells become more mature, they exhibit a reduced sensitivity to their substrate but even the terminally differentiated osteocyte is affected by changes in surface roughness.
...
PMID:Maturation state determines the response of osteogenic cells to surface roughness and 1,25-dihydroxyvitamin D3. 1084 Nov 86

Previous studies suggest that the enhanced expression of the osteoblastic phenotype exhibited by MG63 osteoblast-like cells on rough Ti surfaces (R(a) 4-5 microm) involves increased production of prostaglandin. Inhibition of prostaglandin synthesis by indomethacin blocks surface-roughness-dependent decreases in cell proliferation and increases in alkaline phosphatase activity and the production of osteocalcin and TGF-beta1. This study examined the hypothesis that the increase in expression of the osteoblastic phenotype noted in MG63 cells cultured on rough Ti surfaces is mediated by inducible cyclooxygenase-2 (Cox-2) whereas Cox-1 modulates prostaglandin production and phenotypic expression of the cells under standard conditions and on smooth Ti surfaces. MG63 cells were cultured on tissue culture plastic, smooth Ti (PT, R(a) = 0.60 microm), and two rough Ti surfaces with differing morphologies (SLA, R(a) = 3.97 microm and TPS, R(a) = 5.21 microm). At 24 h after plating, media were replaced with media containing the general Cox inhibitor indomethacin (10(-7)M), the Cox-1 inhibitor resveratrol (1 or 10 microM), or the Cox-2 inhibitor NS-398 (1 or 10 microM). Media were changed again after 48 h. Five days after plating, osteocalcin, PGE(2), and TGF-beta1 content of the conditioned media were determined. Cell numbers were assessed in the same cultures used for determination of osteocalcin production. Cell layer protein and alkaline phosphatase specific activity were assessed in cultures used to measure PGE(2) and TGF-beta1. Indomethacin, resveratrol, and NS-398 had no effect on cell number. Indomethacin blocked the surface-roughness-dependent increase in PGE(2) production by up to 80%. Similarly, resveratrol inhibited up to 50% of the PGE(2) production on smooth surfaces and up to 80% on rough surfaces. In contrast, NS-398 had no effect on PGE(2) production by cells on smooth surfaces but caused a 60% reduction in cultures on rough surfaces. Indomethacin reduced alkaline phosphatase on all surfaces below basal levels. However, neither resveratrol nor NS-398 had an effect. Indomethacin blocked the stimulatory effect of surface roughness on osteocalcin production while resveratrol only partially reduced osteocalcin production, and NS398 completely blocked the surface-dependent increase. TGF-beta1 production on rough surfaces was blocked by indomethacin. The effects of resveratrol and NS-398 were dose dependent, but neither agent caused total inhibition of the increase noted on SLA, and only resveratrol blocked the increase on TPS. These results indicate that both Cox-1 and Cox-2 are involved in the response of osteoblasts to surface roughness with respect to production of PGE(2), TGF-beta1, and osteocalcin. While prostaglandin mediates the effects of surface roughness on alkaline phosphatase, neither Cox-1 nor Cox-2 appears to be involved, at least with respect to the two inhibitors used.
...
PMID:Both cyclooxygenase-1 and cyclooxygenase-2 mediate osteoblast response to titanium surface roughness. 1125 88

When osteoblasts are cultured on surfaces of increasing microroughness, they exhibit decreases in proliferation, increases in differentiation and local factor production, and enhanced response to 1alpha,25(OH)(2)D(3). The cells interact with surfaces through integrins, which signal by the same pathways used by 1alpha,25(OH)(2)D(3), including protein kinase C via phospholipase C and protein kinase A via phospholipase A(2). This provides opportunities for crosstalk that may contribute to the synergistic effects of surface roughness and the vitamin D metabolite. Because these pathways converge at mitogen-activated protein kinase (MAPK), we tested the hypothesis that the extracellular signal-regulated kinase (ERK1/2) subclass of MAPKs mediates the effects of surface roughness and 1alpha,25(OH)(2)D(3). MG63 osteoblast-like osteosarcoma cells were cultured on commercially pure Ti disks with various surface roughnesses: pretreatment (PT; 0.6 microm average roughness [Ra]), coarse grit-blasted and acid-etched (SLA; 4 microm RA), and titanium plasma-sprayed (TPS; 5.2-microm R(a)). At confluence, cells were treated for 24 h with control media or media containing 10(-7) M 1alpha,25(OH)(2)D(3). One-half of the cultures received 1 microm or 10 microm PD98059, a specific inhibitor of the ERK family of MAPKs. PD98059 alone did not affect proliferation, osteocalcin production, or production of transforming growth factor-beta1 or nitric oxide, regardless of the surface roughness. Alkaline phosphatase was reduced by the inhibition of the ERK family kinases on all surfaces to a comparable extent. However, when PD98059 was added to the cultures with 1alpha,25(OH)(2)D(3), the effects of the seco-steroid were blocked, including the synergistic increases seen in MG63 cells cultured on SLA or TPS. These results indicate that ERK1/2 MAPK is required for the maintenance of alkaline phosphatase at control levels and that the effects of 1alpha,25(OH)(2)D(3) are mediated by ERK1/2. However, the effects of surface roughness are not due to the ERK family of MAPKs. This suggests that alternative pathways may be used, including those mediated by other MAPK subclasses.
...
PMID:Osteoblast response to titanium surface roughness and 1alpha,25-(OH)(2)D(3) is mediated through the mitogen-activated protein kinase (MAPK) pathway. 1137 60

Titanium (Ti) surfaces with rough microtopographies enhance osteogenic differentiation, local factor production, and response to osteogenic agents in vitro and increase pullout strength of dental implants in vivo. Estrogens regulate bone formation, resorption, and remodeling in females and may be important in implant success. Here, we tested the hypothesis that estrogen modulates osteoblast response to implant surface morphology. Primary female human osteoblasts were cultured to confluence on three Ti surfaces (pretreatment, PT - R(a) 0.60 microm; sandblasted and acid-etched, SLA - R(a) 3.97 microm; and Ti plasma-sprayed, TPS - R(a) 5.21 microm) and treated for 24 h with 10(-7) or 10(-8) M 17beta-estradiol (E(2)). Cell number decreased with increasing surface roughness, but was not sensitive to E(2). Alkaline phosphatase specific activity of isolated cells and cell layer lysates was lower on rough surfaces. E(2) increased both parameters on smooth surfaces, whereas on rough surfaces, the stimulatory effect of E(2) on alkaline phosphatase was evident only when measuring cell layer lysates. Osteocalcin levels were higher in the conditioned media of cells grown on rough surfaces; E(2) had no effect in cultures on the plastic surfaces, but increased osteocalcin production on all Ti surfaces. TGF-beta1 and PGE(2) production was increased on rough surfaces, and E(2) augmented this effect in a synergistic manner; on smooth surfaces, there was no change in production with E(2). The response of osteoblasts to surface topography was modulated by E(2). On smooth surfaces, E(2) affected only alkaline phosphatase, but on rough surfaces, E(2) increased levels of osteocalcin, TGF-beta1, and PGE(2). These results show that normal adult human female osteoblasts are sensitive to surface microtopography and that E(2) can alter this response.
...
PMID:Response of normal female human osteoblasts (NHOst) to 17beta-estradiol is modulated by implant surface morphology. 1220 40

Osteoblast phenotypic expression in monolayer culture depends on surface microtopography. Here we tested the hypothesis that mineralized bone nodule formation in response to osteotropic agents such as bone morphogenetic protein-2 (BMP-2) and dexamethasone is also influenced by surface microtopography. Fetal rat calvarial (FRC) cells were cultured on Ti implant materials (PT [pretreated], Ra = 0.6 microm; SLA [course grit blasted and acid etched], Ra = 4.0 microm; TPS [Ti plasma sprayed], Ra = 5.2 microm) in the presence of either BMP-2 (20 ng/ml) or 10(-8) M dexamethasone (Dex). At 14 days post-confluence, a homogenous layer of cells covered the surfaces, and stacks of cells that appeared to be nodules emerging from the culture surface were present in some areas on all three Ti surfaces. Cell proliferation decreased while alkaline phosphatase specific activity (ALPase) and nodule number generally increased with increasing surface roughness in both control and treated cultures. There was no difference in cell number between the control and Dex-treated cultures for a particular surface, but BMP-2 significantly reduced cell number compared with control or Dex-treated cultures. Treatment with Dex or BMP-2 further increased ALPase on all surfaces except for PT cultures with Dex. Dex had no effect on nodule area in cultures grown on PT or SLA disks, yet increased nodule number by more than 100% in cultures on PT disks. Though the effect of BMP-2 on nodule number was the same as Dex, BMP-2 increased nodule area on all surfaces except TPS, where area was decreased. Ca and P content of the cell layers in control cultures did not vary with surface roughness. However, cultures treated with Dex had increased Ca content on all surfaces, but the greatest increase was seen on SLA and TPS. BMP-2 increased Ca content in cultures on all surfaces, with the greatest increase on the PT surface. BMP-2 treatment increased P content on all surfaces, whereas Dex only increased P on rough surfaces. Of all cultures examined, the Ca/P weight ratio was 2:1 only on rough surfaces with BMP-2, indicating the presence of bone-like apatite. This was further validated by Fourier transform infrared (FTIR) imaging showing a close association between mineral and matrix on TPS and SLA surfaces with BMP-2-treated cells, and individual spectra indicated the presence of an apatitic mineral phase comparable to bone. In contrast, mineral on the smooth surface of BMP-2-treated cultures and on all surfaces where cultures were treated with Dex was not associated with the matrix and the spectra, not typical of bone apatite, implying dystrophic mineralization. This demonstrates that interactions between growth factor or hormone and surface microtopography can modulate bone cell differentiation and mineralization.
...
PMID:Osteoblast-mediated mineral deposition in culture is dependent on surface microtopography. 1223 75

Microtextured titanium implant surfaces enhance bone formation in vivo and osteoblast phenotypic expression in vitro, but the mechanisms are not understood. To determine the roles of specific microarchitectural features in modulating osteoblast behavior, we used Ti surfaces prepared by electrochemical micromachining as substrates for MG63 osteoblast-like cell culture. Cell response was compared to tissue culture plastic, a sand-blasted with large grit and acid-etched surface with defined mixed microtopography (SLA), polished Ti surfaces, and polished surfaces electrochemically machined through a photoresist pattern to produce cavities with 100, 30 and 10 microm diameters arranged so that the ratio of the microscopic-scale area of the cavities versus the microscopic-scale area of the flat region between the cavities was equal to 1 or 6. Microstructured disks were acid-etched, producing overall sub-micron-scale roughness (Ra=0.7 microm). Cell number, differentiation (alkaline phosphatase; osteocalcin) and local factor levels (TGF-beta1; PGE(2)) varied with microarchitecture. 100 microm cavities favored osteoblast attachment and growth, the sub-micron-scale etch enhanced differentiation and TGF-beta1 production, whereas PGE(2) depended on cavity dimensions but not the sub-micron-scale roughness.
...
PMID:Differential regulation of osteoblasts by substrate microstructural features. 1557 58

Integrin alpha(5)beta(1) regulates osteoblast proliferation and differentiation on smooth synthetic surfaces presenting different chemistries, but it is not known whether this integrin controls osteoblast behavior on surfaces that have micron-scale rough topographies. We cultured MG63 human osteoblast-like cells on titanium substrates with three different roughness characteristics: chemically polished (PT), grit blasted and acid etched with a complex topography consisting of 20-100 mum craters and 0.5-2 mum micropits (SLA), and plasma-sprayed Ti with irregular projections (TPS). Cells spread well on PT but displayed a smaller footprint on SLA or TPS. Nuclei were larger on PT as well. alpha(5)beta(1) binding and FAK phosphorylation were greater on the rougher surfaces (TPS > SLA > PT). Antibodies against the alpha(5)beta(1) binding site on fibronectin had no effect on cell number at 3 days, but [(3)H]-thymidine incorporation was increased, suggesting that binding to fibronectin was necessary for cell cycle regulation. Antibodies to the alpha(5) subunit reduced cell number at 3 days on PT and TPS and reduced DNA synthesis on all substrates in a surface microstructure-independent manner. At 7 days, cell numbers were reduced on PT, and DNA synthesis was reduced by 50% on all surfaces. At 7 days, anti-alpha(5) antibodies caused a partial reduction in alkaline phosphatase enzyme activity on all surfaces, but this effect was independent of surface microstructure. These results indicate that surface micron-scale topography modulates alpha(5)beta(1) integrin binding and FAK activation. Signaling via alpha(5)-dependent mechanisms is required for DNA synthesis and regulation of alkaline phosphatase, but this effect is independent of surface microstructure.
...
PMID:Integrin alpha(5) controls osteoblastic proliferation and differentiation responses to titanium substrates presenting different roughness characteristics in a roughness independent manner. 1713 43

The aim of this study was to investigate the influence of hydrophobic acid-etched (A) and coarse-blasted large-grit and acid-etched (SLA) surfaces as well as hydrophilic modified acid-etched (modA) and modified coarse-blasted large-grit and acid-etched (modSLA) surfaces on the behavior of MG63 cells grown on these surfaces through determination of cell attachment and cell proliferation, time-lapse microscopy of fluorescence-labeled cells, and determination of gene expression by reverse transcription-polymerase chain reaction (RT-PCR). No significant difference of cell attachment on various titanium surfaces was found. Increased cell proliferation was observed on the A surface and the SLA surface compared with the modA surface and the modSLA surface. After 2 days of incubation, on modSLA and modA surfaces a tendency of formation of cell clusters has been observed, which was most pronounced on modSLA surface. On the A and the SLA surface, cell cluster formation started after longer incubation periods. The expression level of the bone-associated genes (alkaline phosphatase, osteocalcin, type-I-collagen, osteoprotegerin, and glyceraldehyde-3-phosphate-dehydrogenase) detected by RT-PCR was highest on the modSLA surface. In conclusion it has been demonstrated that the modSLA surface results in an enhanced cluster formation of osteoblasts grown on this surface and in an increased expression of key osteogenic regulatory genes in osteoblasts.
...
PMID:The initial attachment and subsequent behavior regulation of osteoblasts by dental implant surface modification. 1732 17

Biomaterial surface properties such as microtopography and energy can change cellular responses at the cell-implant interface. Phospholipase D (PLD) is required for the differentiation of osteoblast-like MG63 cells on machined and grit-blasted titanium surfaces. Here, we determined if PLD is also required on microstructured/high-energy substrates and the mechanism involved. shRNAs for human PLD1 and PLD2 were used to silence MG63 cells. Wild-type and PLD1 or PLD1/2 silenced cells were cultured on smooth-pretreatment surfaces (PT); grit-blasted, acid-etched surfaces (SLA); and SLA surfaces modified to have higher surface energy (modSLA). PLD was inhibited with ethanol or activated with 24,25-dihydroxyvitamin-D(3) [24R,25(OH)(2)D(3)]. As surface roughness/energy increased, PLD mRNA and activity increased, cell number decreased, osteocalcin and osteoprotegerin increased, and protein kinase C (PKC) and alkaline phosphatase specific activities increased. Ethanol inhibited PLD and reduced surface effects on these parameters. There was no effect on these parameters after knockdown of PLD1, but PLD1/2 double knockdown had effects comparableto PLD inhibition. 24R,25(OH)(2)D(3) increased PLD activity and the production of osteocalcin and osteoprotegerin, but decreased cell number on the rough/high-energy surfaces. These results confirm that surface roughness/energy-induced PLD activity is required for osteoblast differentiation and that PLD2 is the main isoform involved in this pathway. PLD is activated by 24R,25(OH)(2)D(3) in a surface-dependent manner and inhibition of PLD reduces the effects of surface microstructure/energy on PKC, suggesting that PLD mediates the stimulatory effect of microstructured/high-energy surfaces via PKC-dependent signaling.
...
PMID:The role of phospholipase D in osteoblast response to titanium surface microstructure. 1970 69


1 2 Next >>