Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:2.7.10.2 (focal adhesion kinase)
44,029 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

We isolated the gene for cMG1/ERF-1, a known putative zinc-finger transcription factor, by differential display of mRNA extracted from cardiomyocytes with and without leukemia inhibitory factor (LIF) stimulation. LIF induced cMG1/ERF-1 mRNA at 15 min, and levels peaked at 10-fold initial levels at 30 min. cMG1/ERF-1 expression was inhibited by AG490 (JAK2 inhibitor) and genistein, but was unaffected by PD98059 or wortmannin. Phenylephrine, angiotensin II and endothelin-1 also induced cMG1/ERF-1 expression. Mechanical stretch in vitro and acute pressure overload in vivo increased cMG1/ERF-1 expression. To our knowledge, this is the first report showing that the cMG1/ERF-1 gene can be induced by various hypertrophic stimuli, and that Janus kinase 2 is involved in this process.
...
PMID:Hypertrophic stimuli augment expression of cMG1/ERF-1, a putative zinc-finger motif transcription factor, in rat cardiomyocytes. 1060 34

A rapid and reliable analytical method for the determination of trace elements in human bone by atomic absorption spectrometry is reported. Calcium was determined to estimate the homogeneity of samples. Human bone from the iliac crest was obtained at autopsy of adult subjects. Before analysis samples were decomposed by microwave digestion and acid digestion in a Parr bomb. Zinc, rubidium, strontium, calcium and iron were determined by flame atomic absorption spectrometry (FAAS) and aluminium, copper and lead by electrothermal atomic absorption spectrometry (ETAAS) at optimum measurement conditions. The results for the two digestion procedures agreed for zinc, rubidium and calcium within +/-5%, for copper within +/-7% and for strontium, iron, aluminium and lead within +/-10%. The repeatability of measurement (R.S.D.) for determination of calcium and trace elements after microwave digestion and acid digestion in a Parr bomb was tested in one representative autopsy bone sample by six parallel determinations. It was found to be better than +/-5% either for microwave digested samples or samples digested in a Parr bomb, for all elements determined by FAAS and ETAAS techniques. The accuracy of the applied digestion procedures was checked by analysis of trace elements in NIST SRM 1486 Bone Meal reference material. Good agreement of the results with certified values was obtained for both digestion procedures. The microwave procedure developed for digestion of small amounts of sample was applied in trace elements analysis of bone biopsy samples from dialysis patients.
...
PMID:Determination of trace elements and calcium in bone of the human iliac crest by atomic absorption spectrometry. 1069 33

Human placental alkaline phosphatase (PALP) is synthesized in the placenta during pregnancy and is also expressed in many cancer patients; however, its physiological role is unknown. Here we show that in human fetus fibroblasts as well as normal and H-ras-transformed mouse embryo fibroblasts PALP stimulates DNA synthesis and cell proliferation in synergism with insulin, zinc and calcium. The mitogenic effects of PALP are associated with the activation of c-Raf-1, p42/p44 mitogen-activated protein kinases, p70 S6 kinase, Akt/PKB kinase and phosphatidylinositol 3'-kinase. The results suggest that in vivo PALP may promote fetus development as well as the growth of cancer cells which express oncogenic Ras.
...
PMID:Growth factor-like effects of placental alkaline phosphatase in human fetus and mouse embryo fibroblasts. 1071 64

A three zinc-finger protein that binds specifically to the cDNA representing the unique fusion gene BCR:Abl, associated with acute lymphoblastic leukaemia, has previously been characterised. At this breakpoint, a sequence homology of 8/9 bp exists between the BCR:Abl (fusion) and c-ABL: (parental) target sequences. We show that the three zinc-finger protein discriminates poorly between the fusion (BCR:Abl) and parental (ABL:) sequence (K:(d)s of 42.8 and 65.1 nM, respectively). In order to improve the discriminatory properties of this protein, and to demonstrate the utility of current zinc-finger databases, we have added a fourth zinc-finger to the original three zinc-finger protein. This fourth finger recognises a 3 bp subsite derived from the BCR: portion of the breakpoint and is not present in c-ABL: This novel four finger protein, which now recognises a 12 bp sequence, demonstrates improved specific binding to BcrAbl (K:(d )= 17 nM). More significantly we have shown that there is now enhanced discrimination between BcrAbl and ABL: sequences by the four finger protein than the original three finger protein.
...
PMID:A novel four zinc-finger protein targeted against p190(BcrAbl) fusion oncogene cDNA: utilisation of zinc-finger recognition codes. 1112 77

A continuous-flow extraction system was developed to speed up, facilitate, and improve the accuracy of the chemical fractionation of metals in solid materials. A three-step sequential extraction scheme was used to evaluate the novel system by analyzing calcium (Ca), iron (Fe), manganese (Mn), copper (Cu), and zinc (Zn) in a soil certified reference material (National Institute of Standards and Technology [NIST] SRM 2710). In the proposed system, extraction occurred in a closed chamber through which extractants were passed sequentially. The extracts were collected in a number of subfractions for subsequent name atomic absorption analysis. Apart from the advantages of simplicity, speed, and less risk of the contamination that flow analysis systems usually possess, the continuous-flow system can improve the accuracy of chemical fractionation of metals by sequential extraction. The system ensures that extraction is performed at designated pH values without any need of adjustment. Variation of sample weight to chamber volume ratios from 1:12 to 1:40 had no effect on the extractability of the metals studied. In the extraction of the acid soluble fraction, concentrations of acetic acid in the range 0.11 to 0.5 mol L(-1) had no significant effect on the amounts of metals extracted, except Fe. Increasing the concentration of hydroxylamine in the reducible fraction step from 0.04 to 0.5 mol L(-1) affected the extraction efficiency for Fe, Mn, and Zn. The extraction profile, rather than a single value of extracted concentration, of each element offers additional information about the kinetics of leaching processes and chemical associations between elements in the solid materials.
...
PMID:A novel continuous-flow sequential extraction procedure for metal speciation in solids. 1147 96

A capillary electrophoresis (CE) method has been developed and validated for the determination of the distribution of metals in particulate matter after three-stage sequential extraction. Fe(II), Zn(II), Cu(II), Mn(II), and Cd(II) ions were separated using a background electrolyte consisting of 200 mmol L(-1) ammonium acetate (pH 5.5), 0.5 mmol L(-1) 1,10-phenanthroline, 10 mmol L(-1) hydroxylamine hydrochloride, and 20% acetone. The method was validated with respect to specificity, linearity, detection limits, precision, and accuracy. Detection limits are at sub-microg L(-1) levels (tens of microg g(-1) of particulate matter) using pressure injection. The analytical procedure was checked by analyzing a standard reference material, NIST SRM 1648 Urban Particulate Matter.
...
PMID:Development and validation of capillary electrophoresis for the determination of selected metal ions in airborne particulate matter after sequential extraction. 1193 35

Inductively coupled plasma mass spectrometry is introduced as a method for determining the absolute isotopic composition of zinc. The high ionization efficiency and time-independent characteristics of the mass spectrometry permit the absolute isotopic composition of high ionization potential elements. The mass discrimination of the instrument is calibrated by synthetic isotope mixtures prepared from highly enriched isotopes of zinc. The resulting isotope ratios yield atomic percents of 64Zn, 49.188 +/- 0.030; 66Zn, 27.792 +/- 0.041; 67Zn, 4.041 +/- 0.009; 68Zn, 18.378 +/- 0.050; and 70Zn, 0.600 +/- 0.003. This isotopic composition is different from those of conventional mass spectrometric measurements. Their differences depend on the mass differences about 0.8-1.2%/amu with enhancement of heavier isotopes. The atomic weight calculated from our isotopic composition is 65.3756 +/- 0.0040. The obtained atomic weight is fully consistent with that of a precise coulometric measurement in contrast to the previous mass spectrometric measurements. An isotopic variation of commercial zinc reagents has been investigated. A mass-dependent fractionation of 0.12%/amu is observed in a high-purity metal zinc, NIST-SRM 682, among five reagents. This mass dependence is probably inherited through their purification process.
...
PMID:Absolute isotopic composition and atomic weight of commercial zinc using inductively coupled plasma mass spectrometry. 1246 66

The total synthesis of a 5,15-di[3,5-(o-carboranylmethyl)phenyl]porphyrin 5, its zinc(II) complex 6, and the corresponding nido-carboranylporphyrins 7 and 8 are reported. The molecular structures of porphyrin 6 and of potassium nido-carborane were obtained and are described. The biodistribution of nido-carboranylporphyrins 7 and 8 in BALB/c mice bearing EMT-6 mammary tumors are presented and compared. Both compounds are effective tumor localizers and delivered therapeutic concentrations of boron to tumors (mean+/-standard deviation): 32.5+/-7.1 and 54.3+/-14 microg/g for 7 and 8, respectively, 2 days after the last of 3 injections of a total boron dose of 23 mg/kg body weight. The zinc(II) complex 8 was found to deliver 1.2-1.7 times higher amounts of boron to tumors than 7, with lower tumor-to-blood boron concentration ratios (9.8/1 and 4.7/1 for 7 and 8, respectively, 2 days after injections). The tumor-to-brain boron concentration ratios were >100/1 for both porphyrins 2 days after administration. Both nido-carboranylporphyrins 7 and 8 were well-tolerated at the concentrations used (75 and 78 mg/kg body weight, respectively) and no morbidity or mortality were observed in these studies.
...
PMID:Synthesis, toxicity and biodistribution of two 5,15-di[3,5-(nido-carboranylmethyl)phenyl]porphyrins in EMT-6 tumor bearing mice. 1281 72

A new beamline (MPW6.2) has been designed and built for the study of materials during processing where three synchrotron techniques, SAXS, WAXS and XAS, are available simultaneously. It has been demonstrated that Rietveld refinable data can be collected from silicon SRM 640b over a 60 degrees range in a time scale of 1 s. The data have been refined to a chi(2) of 2.4, the peaks fitting best to a Pearson VII function or with fundamental parameters. The peak halfwidths have been found to be approximately constant at 0.06 degrees over a 120 degrees angular range indicating that the instrumental resolution function has matched its design specification. A quantitative comparison of data sets collected on the same isotactic polypropylene system on MPW6.2 and DUBBLE at the ESRF shows a 17% improvement in angular resolution and a 1.8 improvement in peak-to-background ratio with the RAPID2 system; the ESRF data vary more smoothly across detector channels. The time-dependent wide-angle XRD was tested by comparing a hydration reaction of gypsum-bassanite-anhydrite with energy-dispersive data collected on the same system on the same time scale. Three sample data sets from the reaction were selected for analysis and gave an average chi(2) of 3.8. The Rietveld-refined lattice parameters are a good match with published values and the corresponding errors show a mean value of 3.3 x 10(-4). The data have also been analysed by the Pawley decomposition phase-modelling technique demonstrating the ability of the station to quickly and accurately identify new phases. The combined SAXS/WAXS capability of the station was tested with the crystallization and spinodal decomposition of a very dilute polymer system. Our measurements show that the crystallization of a high-density co-polymer (E76B38) as low as 0.5% by weight can be observed in solution in hexane. The WAXS and SAXS data sets were collected on the same time scale. The SAXS detector was calibrated using a collagen sample that gave 30 orders of diffraction in 1 s of data collection. The combined XRD and XAS measurement capability of the station was tested by observing the collapse and re-crystallization of zinc-exchanged zeolite A (zeolite Zn/Na-A). Previous studies of this material on station 9.3 at the SRS were compared with those from the new station. A time improvement of 38 was observed with better quality counting statistics. The improved angular resolution from the WAXS detector enabled new peaks to be identified.
...
PMID:The new materials processing beamline at the SRS Daresbury, MPW6.2. 1496 Jul 81

Methodology has been developed for the bulk and trace element analysis of spices such as curry powder and turmeric powder originated from Sri Lanka by the k0-standardization method (INAA-k0) and by energy dispersive X-ray fluorescence (EDXRF). SRM 1572 citrus leaves was used to check the accuracy of the results obtained by the two nuclear techniques. The elements determined quantitatively in these matrices by the EDXRF analysis were bromine, calcium, copper, iron, potassium, magnesium, manganese, phosphorus, rubidium, sulphur, strontium and zinc. The results obtained by the two techniques are comparable, although a few inconsistencies were detected, requiring adequate attention for their correction, whenever possible, in future studies.
...
PMID:Bulk and trace element analysis of spices: the applicability of k0-standardization and energy dispersive X-ray fluorescence. 1513 83


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>

---