Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:2.7.10.1 (ERK)
95,504 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Previous reports have designated the labeled derivatives of [4-(phenylamino)-quinazoline-6-yl]-amide group as the most promising EGFR-PET imaging agent candidates. To further improve tracer qualifications and increase stability and solubility, additional derivatives of this group substituted at the 7-position with various lengths of fluoro-polyethyleneglycol (F-PEG) chains were synthesized. These novel derivatives inhibited EGFR autophosphorylation with IC(50) values of 5-40 nM. The compounds were successfully labeled with fluorine-18 at the PEG chain via a three-step radiosynthesis route. The labeled final products were obtained with a 13-32% decay corrected radiochemical yield, 99% radiochemical purity, and high specific activity.
...
PMID:The effect of the [18F]-PEG group on tracer qualification of [4-(phenylamino)-quinazoline-6-YL]-amide moiety--an EGFR putative irreversible inhibitor. 1757 25

To improve the efficiency of orally delivered vaccines, PEGylated PLGA-based nanoparticles displaying RGD molecules at their surface were designed to target human M cells. RGD grafting was performed by an original method called "photografting" which covalently linked RGD peptides mainly on the PEG moiety of the PCL-PEG, included in the formulation. First, three non-targeted formulations with size and zeta potential adapted to M cell uptake and stable in gastro-intestinal fluids, were developed. Their transport by an in vitro model of the human Follicle associated epithelium (co-cultures) was largely increased as compared to mono-cultures (Caco-2 cells). RGD-labelling of nanoparticles significantly increased their transport by co-cultures, due to interactions between the RGD ligand and the beta(1) intregrins detected at the apical surface of co-cultures. In vivo studies demonstrated that RGD-labelled nanoparticles particularly concentrated in M cells. Finally, ovalbumin-loaded nanoparticles were orally administrated to mice and induced an IgG response, attesting antigen ability to elicit an immune response after oral delivery.
...
PMID:PEGylated PLGA-based nanoparticles targeting M cells for oral vaccination. 1758 81

In this study, the concept of hydrophobic ion pairing was adopted for incorporating lysozyme into electrospun poly(epsilon-caprolactone) (PCL)/poly(ethylene glycol) (PEG) non-woven membranes. The solubility of lysozyme in organic solvent was enhanced through the formation of lysozyme-oleate complexes, which could be directly loaded into PCL/PEG membranes using electrospinning technique. The resultant PCL/PEG nanofibers have a compact structure with an average diameter ranged from about 0.4 microm to 0.9 microm. The addition of PEG into the PCL nanofibers not only improved the hydrophilicity of the membrane, but also played an important role on in vitro lysozyme release rate. It was found that the release rate of lysozyme was enhanced with the increase of PEG content. In addition, the increase of salt concentration in the release medium accelerated lysozyme release. It has also been shown that the released lysozyme retained most of its enzymatic activity.
...
PMID:Encapsulation and controlled release of lysozyme from electrospun poly(epsilon-caprolactone)/poly(ethylene glycol) non-woven membranes by formation of lysozyme-oleate complexes. 1766 13

In this article, nano-magnetite particles (ferrofluid, Fe3O4) were prepared by chemical co-deposition method. A series of biodegradable triblock poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL, PCEC) copolymers were synthesized by ring-opening polymerization method from epsilon-caprolactone (epsilon-CL) initiated by poly(ethylene glycol) diol (PEG) using stannous octoate as catalyst. And the magnetic PCEC composite microspheres were prepared by solvent diffusion method. The properties of the ferrofluid, PCEC copolymer, and magnetic PCEC microspheres were studied in detail by SEM, VSM, XRD, Malvern Laser Particle Sizer, 1H-NMR, GPC, and TG/DTG. Effects of macromolecular weight and concentration of polymer, and the time for ultrasound dispersion on properties of magnetic microspheres were also investigated. The obtained magnetic PCEC microspheres might have great potential application in targeted drug delivery system or cell separation.
...
PMID:Preparation and characterization of magnetic poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) microspheres. 1770 Dec 92

Polymer micelles with two different core-forming blocks, poly(d,l -lactide) (PLA) and poly(epsilon-caprolactone) (PCL), but the same coronal material, poly(ethylene glycol) (PEG), were investigated in this study as nanoscopic drug carriers. The release of two different drugs, doxorubicin (DOX) and beta-lapachone (beta-lap), from PEG(5k)-b-PCL(5k) and PEG(5k)-b-PLA(5k) micelles was studied at pH 5.0 and 7.4. Mathematical solutions of both Higuchi's model and Fickian diffusion equations were utilized to elucidate the differences between the micelle core materials for the two drugs. The neutral and smaller of the two drugs tested, beta-lap, demonstrated faster, pH-independent release, suggesting that no substantial changes occurred in either micelle core at lower pH. In contrast, the release rate of DOX was found to noticeably increase at lower pH with a larger cumulative amount of drug released. Different core materials were shown to have considerable influence on the release kinetics of both drugs: in both cases, the more hydrophobic PCL core showed slower drug release rates compared with the less hydrophobic PLA core.
...
PMID:Doxorubicin and beta-lapachone release and interaction with micellar core materials: experiment and modeling. 1772 Sep 55

Reactive impingement mixing was employed to produce polymer-protected nanoparticles. Amphiphilic block copolymer was formed in situ by reactive coupling of hydrophobic and hydrophilic blocks. Simultaneously, a hydrophobic compound and the copolymer coprecipitated to form nanoparticles in the range of 100 nm. Specifically, beta-carotene was stabilized by the amphiphilic diblock copolymer, formed from the reaction of an amino-terminated hydrophilic block, poly(ethylene glycol) (PEG-NH2), with an acid chloride-terminated hydrophobic block, either poly(epsilon-caprolactone) (PCL-COCl) or polystyrene (PS-COCl). Spherical particles were observed by scanning and cryogenic transmission electron microscopy. Process conditions, including feed concentration of beta-carotene and feed concentrations of polymeric stabilizers, had little or no effect on average particle sizes over the range studied. Further, for Reynolds numbers greater than 500 the feed flow rates also had no effect. The effect of glass transition temperature (Tg) of the hydrophobic polymer on morphology and particle formation mechanism is discussed.
...
PMID:Formation of block copolymer-protected nanoparticles via reactive impingement mixing. 1782 26

We report the development of three protein loaded polymer blend and composite materials that modify the release kinetics of the protein from poly(dl-lactic acid) (P(dl)LA) scaffolds. P(dl)LA has been combined with either poly(ethylene glycol) (PEG), poly(caprolactone) (PCL) microparticles or calcium alginate fibres using supercritical CO(2) (scCO(2)) processing to form single and dual protein release scaffolds. P(dl)LA was blended with the hydrophilic polymer PEG using scCO(2) to increase the water uptake of the resultant scaffold and modify the release kinetics of an encapsulated protein. This was demonstrated by the more rapid release of the protein when compared to the release rate from P(dl)LA only scaffolds. For the P(dl)LA/alginate scaffolds, the protein loaded alginate fibres were processed into porous protein loaded P(dl)LA scaffolds using scCO(2) to produce dual release kinetics from the scaffolds. Protein release from the hydrophilic alginate fibres was more rapid in the initial stages, complementing the slower release from the slower degrading P(dl)LA scaffolds. In contrast, when protein loaded PCL particles were loaded into P(dl)LA scaffolds, the rate of protein release was retarded from the slow degrading PCL phase.
...
PMID:Controlling protein release from scaffolds using polymer blends and composites. 1788

Biodegradable elastic hydrogel scaffolds based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(epsilon-caprolactone) (PCL) were fabricated and investigated as a delivery vehicle of rabbit chondrocytes for the formation of neocartilage. The diacrylated forms of PEG and PCL were used as building blocks to prepare a series of hydrogel scaffolds with different block compositions and, thus, different physico-chemical properties. The porous hydrogel scaffolds were prepared by using the salt leaching method that is generally used for the creation of porous scaffolds, and their in vitro cell interactions were examined using chondrocytes. The hydrogel scaffold with a relatively high PEG content showed better cell growth for chondrocytes, while the scaffold with a relatively low PEG content showed lower chondrogenic differentiation. It was observed that different kinds of scaffolds and rabbit chondrocytes were shown to have different swelling ratios in the scaffold for effective cell growth and tissue regeneration. RT-PCR results for the resultant cartilage tissue revealed that a PEG-PCL ratio of 14 to 6 scaffold was optimal for cartilage tissue formation in terms of collagen Type II, aggrecan, SOX9, and COMP gene expression. In addition, the hydrogel scaffold with a PEG-PCL ratio of 14 to 6 showed faster formation of new cartilage than those shown by other scaffolds.
...
PMID:In vitro and in vivo test of PEG/PCL-based hydrogel scaffold for cell delivery application. 1790 79

To overcome multidrug resistance (MDR) existing in tumor chemotherapy, polymeric micelles encoded with folic acid on the micelle surface were prepared with the encapsulation of a potent MDR modulator, FG020326. The micelles were fabricated from diblock copolymers of poly(ethylene glycol) (PEG) and biodegradable poly(epsilon-caprolactone) (PCL) with folate attached to the distal ends of PEG chains. The folate-conjugated copolymers, folate-PEG-PCL, were synthesized by multistep chemical reactions. First, allyl-terminated copolymer (allyl-PEG-PCL) was synthesized through a ring-opening polymerization of epsilon-caprolactone in bulk employing monoallyl-PEG as a macroinitiator. Second, the allyl terminal groups of copolymers were converted into primary amino groups by a radical addition reaction, followed by conjugation of the carboxylic group of folic acid. In vitro studies at 37 degrees C demonstrated that FG020326 release from micelles at pH 5.0 was faster than that at pH 7.4. Cytotoxicity studies with MTT assays indicated that folate-functionalized and FG020326-loaded micelles resensitized the cells approximately five times more than their folate-free counterparts (p < 0.01) in human KB(v200) cells treated with vincristine (VCR). The in vitro Rhodamine 123 efflux experiment using MDR KB(v200) cells revealed that when cells were pretreated with folate-attached and FG020326-loaded micelles, the P-glycoprotein (P-gp) drug efflux function was significantly inhibited.
...
PMID:Folate-functionalized polymeric micelles for tumor targeted delivery of a potent multidrug-resistance modulator FG020326. 1794 Oct 15

Electrospun fibers with contrasting cell adhesion properties provided non-woven substrates with enhanced in vitro acceptance and controllable cell interactions. Poly(ethylene glycol)-block-poly(epsilon-caprolactone) (PEG-b-PCL) block copolymers with varying segment lengths were synthesized in two steps and characterized by NMR and GPC. A cell adhesive peptide sequence, GRGDS, was covalently coupled to the PEG segment of the copolymer in an additional step. The suitability of polymers with molecular weights ranging from 10 to 30 kDa for electrospinning and the influences of molecular weight, solvent, and concentration on the resulting morphologies were investigated. Generally, electrospun fibers were obtained by electrospinning polymers with molecular weight larger than 25 kDa and concentrations of 10 wt%. Methanol/chloroform (25/75, v/v) mixtures proved to be good solvent systems for electrospinning the PEG-b-PCL and resulted in hydrophilic, non-woven fiber meshes (contact angle 30 degrees ). The mesh without cell adhesive GRGDS ligands showed no attachment of human dermal fibroblasts after 24 h cell culture demonstrating that the particular combination of the material and electrospinnig conditions yielded protein and cell repellent properties. The GRGDS immobilized mesh showed excellent cellular attachment with fibroblasts viable after 24 h with spread morphology. Electrospun nanofibers based on block copolymers have been produced which are capable of specifically targeting cell receptor binding and are a promising material for tissue engineering and controlling cell material interactions.
...
PMID:Biofunctionalized poly(ethylene glycol)-block-poly(epsilon-caprolactone) nanofibers for tissue engineering. 1799 77


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>

---