Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:2.7.10.1 (ERK)
95,504 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Hb (hemoglobin)-loaded particles (HbP) encapsulated by a biodegradable polymer used as oxygen carrier were prepared. A modified double emulsion and solvent diffusion/evaporation method was adopted. All experiments were performed based on two types of biodegradable polymers, poly(epsilon-caprolactone) (PCL) and poly(epsilon-caprolactone-ethylene glycol) (PCL-PEG). The biodistribution and the survival time in blood of the particles were investigated in a mouse model. Encapsulation efficiency and pore-connecting efficiency were evaluated by a novel sulfocyanate potassium method. The influence of process parameters on the particle size and pore-connecting efficiency (PCE%) of nanoparticles have been discussed. The prepared conditions: solvent, external aqueous phase, pressure were discussed. The system utilizing dichloromethane (DCM)/ethyl acetate (EA) as a solvent with an unsaturated external aqueous phase yielded the highest encapsulation efficiency (87.35%) with a small mean particle size (153 nm). The formation of porous channels was attributed to the diffusion of solvent. The PCE% was more sensitive to the rate of solvent diffusion that was obviously affected by the preparation temperature. The PCE% reached 87.47% when PCL-PEG was employed at 25 degrees C. P(50) of HbP was 27 mmHg, which does not seem to be greatly affected by the encapsulation procedure. In vivo, following intravenous injection of 6-coumarin labeled HbP, the major organ accumulating Hb-loaded particles was the liver. The half-life of nano-sized PCL HbP was 3.1 times as long as the micro-sized PCL HbP. Also, Nano-sized as well as a PEGylated surface on HbP is beneficial for prolonged blood residence (7.2 fold increase).
...
PMID:Preparation of hemoglobin-loaded nano-sized particles with porous structure as oxygen carriers. 1712 98

Genospheres are cationic lipid-nucleic acid nanoparticles prepared by the assembly of the lipids and nucleic acids from an aqueous/organic liquid monophase that independently dissolves the components, where the resultant particles are homogeneously sized (70-110 nm), with efficiently incorporated and protected DNA. In the present study, we demonstrate pH-dependent modulation of the Genosphere surface charge using pH-titratable lipids. By incorporation of the lipids with titratable anionic or imidazole headgroups, Genospheres with neutral or anionic surface charge at neutral pH were produced and compared for cellular uptake and transfection of a reporter gene (luciferase) in culture of breast cancer cells. The extent of particle-cell association was also studied by fluorescent microscopy and quantified by cytofluorometery. The effects of Genosphere surface modification with poly(ethylene glycol) (molecular weight 2000) at low (0.5 mol %) and high (5 mol %) grafting densities, as well as the effects of HER2-receptor-directed targeting by an internalizable anti-HER2 scFv F5, linked via PEG spacer, were also studied. Inclusion in the Genosphere formulation of pH-titratable lipids CHEMS (cholesteryl hemisuccinate), CHIM (1-(3-(cholesteryloxycarbonylamino)propyl)imidazole), or DSGG (1,2-distearoyl-sn-glycero-3-hemiglutarate) rendered the particles surface-charge neutral or slightly anionic at neutral pH, and cationic at mildly acidic pH, as shown by zeta-potential measurements. In HER2-targeted systems, transfection activity and target specificity with HER2-overexpressing SKBR-3 breast cancer cells were dependent on Genosphere surface charge and PEGylation. The highest target specificity correlated with low cationic charge at neutral pH, while incorporation of 5 mol % PEG-lipid had only minor effects on Genosphere-cell association, internalization, and transfection activity. The implications of this work for potential in vivo applications are discussed.
...
PMID:Increased target specificity of anti-HER2 genospheres by modification of surface charge and degree of PEGylation. 1714 Feb 60

A novel method for synthesis of anti-EGFR immunoliposomes using folate-folate binding protein (FBP) affinity is described. An anti-EGFR antibody (cetuximab or C225) was covalently linked to FBP via a thioether bond. Liposomes incorporating a lipophilic folate derivative (folate-PEG-cholesterol) were prepared by polycarbonate membrane extrusion. Anti-EGFR immunoliposomes were then obtained by combining FBP-C225 and folate-liposomes and evaluated for uptake and cytotoxicity in EGFR-overexpressing U87 human glioblastoma cells. Anti-EGFR immunoliposomes constructed via folate-FBP affinity exhibited excellent stability under physiological pH, and quickly released the bound FBP-C225 upon low pH (pH 3.5) treatment. Flow cytometry and fluorescence microscopy showed similar receptor-specific binding and internalization for both folate-FBP affinity-coupled and covalently coupled C225-immunoliposomes, but not for the non-targeted IgG-immunoliposomes. C225-immunoliposomes loaded with anticancer drug doxorubicin were more cytotoxic than non-targeted immunoliposomes in EGFR-overexpressing U87 glioma cells. Folate-FBP affinity is a potential method for construction of immunoliposomes and may have applications in synthesis of targeted drug carriers in general.
...
PMID:Construction of anti-EGFR immunoliposomes via folate-folate binding protein affinity. 1721 81

Core-shell nanoparticles were prepared from di-block copolymer of methoxy poly(ethylene glycol)-polycaprolactone (MePEG-PCL) and tri-block copolymer of polycaprolactone-poly(ethylene glycol)-polycaprolactone (PCL-PEG-PCL). The MePEG-PCL copolymers form nanoparticles with PEG "brush" on their surfaces and PCL-PEG-PCL copolymers form nanoparticles with a "mushroom-like" structure on their surfaces in aqueous solution. The morphology and size of nanoparticles were measured by field emission scanning electron microscopy (FESEM) and laser light scattering (LLS). All the nanoparticles are in spherical shape and the sizes are less than 200 nm. The sizes of the nanoparticles increases with increasing PCL segment length. The drug-loading content results showed that the optimal feeding ratio of paclitaxel to copolymer is dependent upon the copolymer composition and 5% is a suitable feeding ratio. The in vitro release behavior exhibits a sustained release manner and is affected by copolymer composition. Experimental results showed that cells would prefer to attach to more hydrophobic polymers. Comparing between MePEG-PCL and PCL-PEG-PCL of similar hydrophobicity, more HepG2 cells have attached to the MePEG-PCL copolymer films because a denser PEG layer was formed on the surfaces of PCL-PEG-PCL copolymers. In vitro cellular uptake experimental results indicated that HepG2 cells prefer smaller nanoparticles with the same PEG configuration on their surfaces. The cytotoxicity of paclitaxel-loaded nanoparticles seemed to increase with increasing drug loading of nanoparticles against HepG2 cells.
...
PMID:Effect of PEG conformation and particle size on the cellular uptake efficiency of nanoparticles with the HepG2 cells. 1724 84

Methoxy poly(ethylene glycol)-b-poly(caprolactone) (MePEG-b-PCL) copolymers with varying PEG block lengths and a constant PCL block length were synthesized by cationic ring-opening polymerization and used to form nano-sized micelles. Due to their small size and superior in vitro stability, the MePEG(5000)-b-PCL(5000) micelles were selected for further in vitro characterization and an in vivo evaluation of their fate and stability following intravenous (i.v.) administration. Specifically, (3)H-labelled MePEG(5000)-b-PCL(5000) micelles were i.v. administered to Balb/C mice at copolymer doses of 250, 2 and 0.2 mg/kg in order to examine the distribution kinetics of (1) copolymer assembled as thermodynamically stable micelles, (2) copolymer assembled as thermodynamically unstable micelles and (3) copolymer unimers, respectively. Overall, it was found that when the copolymer is assembled as thermodynamically stable micelles the material is effectively restricted to the plasma compartment. Interestingly, the copolymer was found to have a relatively long circulation half-life even when administered at a dose that would likely fall to concentrations below the CMC following distribution. Analysis of plasma samples from this group revealed that even 24 h post-administration a significant portion of the copolymer remained assembled as intact micelles. In this way, this study demonstrates that the hydrophobic and semi-crystalline nature of the PCL core imparts a high degree of kinetic stability to this micelle system.
...
PMID:In vivo fate of unimers and micelles of a poly(ethylene glycol)-block-poly(caprolactone) copolymer in mice following intravenous administration. 1725 17

The main objective of the present study was to evaluate the reduction in halofantrine (Hf) toxicity, an antimalarial drug frequently associated with QT interval prolongation in electrocardiogram, by its entrapment in poly-epsilon-caprolactone nanocapsules (NC). The acute lethal dose (LD(100)) of Hf.HCl experimentally observed was 200 mg/kg whereas the calculated LD(50) was 154 mg/kg. In contrast, the LD(100) for Hf-NC was 300 mg/kg with a longer mean time to death than Hf.HCl. The calculated LD(50) was 249 mg/kg for Hf-NC. The Hf entrapped in PCL NC presented a greater efficacy than PLA-PEG NC and than Hf solution in P. berghei-infected mice at 1 mg/kg. The cardiovascular parameters, ECG and arterial blood pressure, were evaluated in anaesthetized Wistar rats after the IV administration of a single, especially high dose (100 and 150 mg/kg) of halofantrine base loaded-nanocapsules (Hf-NC) or halofantrine chlorhydrate (Hf.HCl) solution. It was observed that Hf solution caused prolongation of the QT and PR intervals of the ECG; however, this effect was significantly (P<0.001) reduced when Hf was administered entrapped in nanocapsules. The treatment with Hf.HCl induced a pronounced bradycardia and severe hypotension leading to death. The effect of Hf-NC upon heart rate was reduced from 58 to 75% for 100 and 150 mg/kg, respectively, when compared with Hf.HCl solution. These findings show that the encapsulation of halofantrine reduces the QT interval prolongation of ECG in rats and suggest that a modification of drug distribution was possible by using nanocapsules. Hf encapsulation was the main factor responsible for the significant reduction in cardiac toxicity observed.
...
PMID:Cardiotoxicity reduction induced by halofantrine entrapped in nanocapsule devices. 1730 79

The nanostructure of a biomaterial surface has strong influence on cell behavior. The migration of cells on nanostructured surfaces, however, has not been investigated so far. In this study, we used PCL/PEG diblock copolymers as model surfaces to examine the effect of nanoislands on migration of different cells, including fibroblasts and endothelial cells. The water sliding angle of the substrates was measured. The cell migration rate was examined under a real-time optical microscope. It was found that a greater cell migration rate correlated with the smaller sliding angle of the substrate.
...
PMID:Cell migration rate on poly(epsilon-caprolactone)/poly(ethylene glycol) diblock copolymers and correlation with the material sliding angle. 1742 10

A series of biodegradable PCL-PEG-PCL block copolymers were successfully synthesized by ring-opening polymerization of epsilon-caprolactone initiated by poly(ethylene glycol) (PEG), which were characterized by (1)H NMR, (13)C NMR, and FTIR. Their aqueous solution displayed special gel-sol transition behavior with temperature increasing from 4 to 100 degrees C, when the polymer concentration was above corresponding critical gel concentration (CGC). The gel-sol phase diagram was recorded using test tube inverting method and DSC method, which depended not only on chemical composition of copolymers, but also on heating history of copolymer's aqueous solution. As a result, the gel-sol transition temperature could be adjusted, which might be very useful for its application in biomedical fields such as injectable drug delivery system. And the typical shell-core structure of PCL-PEG-PCL micelles was introduced. The micelle-packing and partial crystallization might be the key gelation machanism for this gel-sol transition behavior of PCL-PEG-PCL aqueous solution.
...
PMID:Thermoreversible gel-sol behavior of biodegradable PCL-PEG-PCL triblock copolymer in aqueous solutions. 1745 82

p-Piperazinobenzaldehyde methoxy poly(ethylene glycol) (mPEG, 5 kDa) acetal was synthesized by the Buchwald-Hartwig coupling reaction from piperazine and p-bromobenzaldehyde mPEG acetal. Introduction of a maleimide moiety yielded a novel acetal-based PEGylation reagent (PEG-acetal-MAL) for pH-sensitive conjugation of PEG to thiol-functionalized biomolecules. For reversible shielding of polyplexes, PEG-acetal-MAL was conjugated to polyethylenimine (PEI). At 37 degrees C, the PEG-acetal-PEI conjugate had a half-life of 3 min at endosomal pH 5.5 and 2 h at physiological pH 7.4, respectively. PEI polyplexes containing PEG-acetal-PEI had a zeta potential of +3 mV and were stable to salt-induced aggregation for 2 h at pH 7.4. In contrast, at endosomal pH, the particles were deshielded and aggregated within 0.5 h. Epidermal growth factor or transferrin receptor-targeted polyplexes shielded with the pH-sensitive PEG-acetal mediated enhanced luciferase gene expression in receptor-expressing target cells (Renca-EGFR or K562) as compared to stably shielded control polyplexes. Thus, the novel PEG-acetal-MAL reagent may present a versatile tool for drug and gene delivery formulations when pH-sensitive PEGylation is preferred.
...
PMID:An acetal-based PEGylation reagent for pH-sensitive shielding of DNA polyplexes. 1747

Paclitaxel-loaded biodegradable drug delivery systems manufactured from poly(lactic-co-glycolic acid) (PLGA) are known to release the drug at extremely slow rates. The objective of this study was to characterize paclitaxel-loaded microspheres composed of blends of PLGA with low molecular weight ampipathic diblock copolymers. The encapsulation and release of a series of poly(epsilon-caprolactone) (PCL)- or poly(D,L-lactic acid) (PDLLA)-co-methoxypolyethylene glycol (MePEG) diblock copolymers was measured using quantitative gel permeation chromatography. Polymeric miscibility was determined by glass transition temperature measurements using differential scanning calorimetry and paclitaxel release was measured using HPLC methods. The PCL- and PDLLA-based diblock copolymers encapsulated at high efficiency and were miscible in PLGA microspheres (30-120m microm size range). The burst phase of paclitaxel release was increased up to 20-fold by the inclusion of diblock copolymers in PLGA microspheres. Approximately 10% of the more hydrophobic PCL-based copolymers released from the microspheres in a short burst over 3 days followed by very slow release over the following 10 weeks. Only the PDLLA-based copolymer released from the PLGA microspheres in a controlled manner over 10 weeks. All microspheres containing PEG were found to have more hydrophilic surfaces (as measured by contact angle) with improved biocompatibility (reduced neutrophil activation) compared to PLGA only microspheres. These results indicate that low molecular weight polyester-based diblock copolymers may be effectively encapsulated in PLGA microspheres to increase paclitaxel release (probably through a micellization process) and improve biocompatibility.
...
PMID:The characterization of paclitaxel-loaded microspheres manufactured from blends of poly(lactic-co-glycolic acid) (PLGA) and low molecular weight diblock copolymers. 1755 95


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>

---