Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound   Target Concepts: Gene/Protein Disease Symptom Drug Enzyme Compound

---

Query: EC:2.7.10.1 (ERK)
95,504 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Block copolymers were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of monohydroxyl or dihydroxyl poly(ethylene glycol) (PEG), using Zn powder as catalyst. The resulting poly(epsilon-caprolactone) (PCL)-PEG diblock and PCL-PEG-PCL triblock copolymers were characterized by various analytical techniques such as NMR, size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Both copolymers were semicrystalline polymers, the crystalline structure being of the PCL type. Films were prepared by casting dichloromethane solutions of the polymers on a glass plate. Square samples with dimensions of 10 x 10 mm were allowed to degrade in a pH = 7.0 phosphate buffer solution containing Pseudomonas lipase. Data showed that the introduction of PEG blocks did not decrease the degradation rate of poly(epsilon-caprolactone).
...
PMID:Enzymatic degradation of block copolymers prepared from epsilon-caprolactone and poly(ethylene glycol). 1200 24

Growth hormone (GH) and IGFs have a long distinguished history in diabetes, with possible participation in the development of renal complications. The implicated effect of GH in diabetic end-stage organ damage may be mediated by growth hormone receptor (GHR) or postreceptor events in GH signal transduction. The present study investigates the effects of diabetes induced by streptozotocin (STZ) on renal GH signaling. Our results demonstrate that JAK2, insulin receptor substrate (IRS)-1, Shc, ERKs, and Akt are widely distributed in the kidney, and after GH treatment, there is a significant increase in phosphorylation of these proteins in STZ-induced diabetic rats compared with controls. Moreover, the GH-induced association of IRS-1/phosphatidylinositol 3-kinase, IRS-1/growth factor receptor bound 2 (Grb2), and Shc/Grb2 are increased in diabetic rats as well. Immunohistochemical studies show that GH-induced p-Akt and p-ERK activation is apparently more pronounced in the kidneys of diabetic rats. Administration of G120K-PEG, a GH antagonist, in diabetic mice shows inhibitory effects on diabetic renal enlargement and reverses the alterations in GH signal transduction observed in diabetic animals. The present study demonstrates a role for GH signaling in the pathogenesis of early diabetic renal changes and suggests that specific GHR blockade may present a new concept in the treatment of diabetic kidney disease.
...
PMID:Modulation of growth hormone signal transduction in kidneys of streptozotocin-induced diabetic animals: effect of a growth hormone receptor antagonist. 1208 60

The miscibility and phase behavior of two stereoisomer forms of poly(lactide) (PLA: poly (L-lactide) (PLLA) and poly(DL-lactide) (PDLLA)) blends with poly(epsilon-caprolactone)-b-poly(ethylene glycol) (PCL-b-PEG) and PCL-b-monomethoxy-PEG (PCL-b-MPEG) block copolymers have been investigated by differential scanning calorimetry (DSC). The DSC thermal behavior of both the blend systems revealed that PLA is miscible with the PEG segment phase of PCL-b-(M)PEG but is still immiscible with its PCL segment phase although PCL was block-copolymerized with PEG. On the basis of these results, PCL-b-PEG was added as a compatibilizer to PLA/PCL binary blends. The improvement in mechanical properties of PLA/PCL blends was achieved as anticipated upon the addition of PCL-b-PEG. In addition, atomic force microscopy (AFM) measurements have been performed in order to study the compositional synergism to be observed in mechanical tests. AFM observations of the morphological dependency on blend composition indicate that PLA/PCL blends are immiscible but compatible to some extent and that synergism of compatibilizing may be maximized in the compositional blend ratio before apparent phase separation and coarsening.
...
PMID:Compatibilization effect of poly(epsilon-caprolactone)-b-poly(ethylene glycol) block copolymers and phase morphology analysis in immiscible poly(lactide)/poly(epsilon-caprolactone) blends. 1242 54

New high-molecular-weight hydrophobic/hydrophilic segmented copolymers of poly(ester ether carbonate) structure, containing poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) (PEG) segments in their main chain, were synthesized and characterized. These copolymers were obtained by a two-step chain-extension reaction carried out in the presence of alpha,omega-dihydroxy-oligoPCL of molecular weight 1250 and PEG samples of molecular weight 150, 400, 600, 1000, and 2000. The molecular structures of all synthesized materials were characterized by means of (1)H NMR and (13)C NMR spectroscopy, their molecular weights were determined by means of size exclusion chromatography, and their thermal properties were obtained by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The poly(ester ether carbonate)s of this study are partly or totally miscible at least up to 50 wt % with poly(vinyl chloride) (PVC) and could be used to produce flexible PVC formulations. The miscibility between PVC and the poly(ester ether carbonate)s reported in this paper was investigated by means of DSC and DMA analysis. PVC blends were also analyzed by determining their swellability and the amount of extractables in aqueous media. By comparison purposes, the chain-extension product of PCL1250, that is, PCL polycarbonate, was also synthesized and characterized. The results obtained demonstrated that the copolymers with shortest PEG segment length, i.e. PEG150, 400, and 600, give the best results in terms of miscibility with PVC and lead to blends with maximum resistance to extraction by water. Therefore, they represent, in principle, good substitutes for low-molecular-weight, leachable PVC plasticizers, such as di(ethylhexyl) phthalate.
...
PMID:Polycaprolactone-poly(ethylene glycol) multiblock copolymers as potential substitutes for di(ethylhexyl) phthalate in flexible poly(vinyl chloride) formulations. 1252 64

The aim of present work was to develop a microporous-controlled delivery system for theophylline via coating a blend of PCL and PEG on the surface of tablets, where PCL was the major component of film coating material and PEG was acted as a leachable pore-forming agent when contacting with an aqueous medium. The influences of the type of solvent, the amount of PEG, and the thickness of films on the mechanical and thermal properties of coating films and drug release performance were investigated. The DSC thermograms and FTIR spectra indicated both PCL and PEG remained independently in the blended films. The mechanical data showed a decrease tendency as increase in the amount of PEG in the blends due to highly crystalline character of PEG. Slower evaporation rate of acetone than dichloromethane enhanced phase separation between PCL and PEG during film formation, and resulted in the pore size in films prepared from acetone larger than from dichloromethane. The release rate of coated tablets were increased by increasing the amount of pore-forming agent, and the corresponding values from tablets coated in dichloromethane were less than in acetone. Much denser structure and smaller pore size of films formed from dichloromethane contributed to this result. The release of drug from tablets coated in acetone showed a profile more close to a zero-order constant release profile. The penetration of water into drug core played an important role in influencing drug release pattern.
...
PMID:Design of a microporous controlled delivery system for theophylline tablets. 1271 42

The design of surface-engineered nanoparticles for targeting to specific sites is a major challenge. To our knowledge, no study in the literature deals with ligand functionalization of biodegradable nanoparticles through biotin-avidin interactions. With the aim of conceiving small-sized nanoparticles which can be easily functionalized with a variety of ligands or mixtures thereof, biotinylated and PEGylated biotin-poly(ethylene glycol)-poly(epsilon-caprolactone) (B-PEG-PCL) copolymers were synthesized and used to prepare nanoparticles of around 100 nm. Avidin, followed by biotinylated wheat germ agglutinin as a model lectin, were coupled to their surface by taking advantage of the strong biotin-avidin complex formation. The cytotoxicity of the nanospheres towards Caco-2 cells in culture was negligible (more than 82% cell survival for nanoparticle concentrations up to 300 microg/well). The amount of radiolabeled poly(lactic acid) (PLA) or PEG-PLA nanoparticles associated with Caco-2 cells was only 0.7% and 1.5% of the amount added, respectively. This value was increased to 8.5% when a sufficient amount of lectin was bound to the PEG-PLA copolymer. After further studies, the biotin-PEG-coated nanoparticles could be helpful tools for studying the interaction between cells and functionalized nanoparticles with various surface characteristics (PEG layer density and thickness, ligand type and density).
...
PMID:Surface-engineered nanoparticles for multiple ligand coupling. 1292 62

Alternating amphiphilic multiblock copolymers, consisting of polyoxyethylene (POE) and poly(epsilon-caprolactone) (PCL) of various lengths, were synthesized by a polycondensation reaction between dicarboxylated PEG and dihydroxyl PCL. The polymer formed a physical hydrogel by PCL crystallization. For in vitro hydrolysis in phosphate-buffered saline solution, the change of molecular weight depended on the composing block length of POE. The polymer with longer POE showed a faster decline in molecular weight. The mass remaining at the end of two weeks at 25 degrees C was more than 95 w%. However, when the swollen hydrogels were exposed to temperatures slightly above PCL melting point for 30 min, the degradation rate was accelerated and the mass remaining dropped to less than 10 wt% in one week. In vivo degradation after hydrogel implantation, the polymer degraded as under in vitro. However, the implant irradiated with infrared (IR) accelerated its degradation similar to a treatment with elevated temperature.
...
PMID:In situ accelerated degradation of polyoxyethylene/poly(epsilon-caprolactone) multiblock copolymer by moderate thermal treatment. 1466 69

Controlled release polymer vesicles are prepared using hydrolysable diblock copolymers of polyethyleneglycol-poly-l-lactic acid (PEG-PLA) or polyethyleneglycol-polycaprolactone (PEG-PCL). Encapsulation studies with a common anti-cancer agent, doxorubicin, show loading comparable to liposomes. Rates of encapsulant release from the hydrolysable vesicles are accelerated with an increased proportion of PEG but are delayed with a more hydrophobic chain chemistry (i.e. PCL). Rates of release also rise linearly with the molar ratio of degradable copolymer blended into membranes of a non-degradable, PEG-based block copolymer (PEG-polybutadiene (PBD)). With all compositions, in both 100 nm and giant vesicles, the average release time (from hours to days) reflects a highly quantized process in which any given vesicle is either intact and retains its encapsulant, or is porated and slowly disintegrates. Poration occurs as the hydrophobic PLA or PCL block is hydrolytically scissioned, progressively generating an increasing number of pore-preferring copolymers in the membrane. Kinetics of this evolving detergent mechanism overlay the phase behavior of amphiphiles with transitions from membranes to micelles allowing controlled release.
...
PMID:Self-porating polymersomes of PEG-PLA and PEG-PCL: hydrolysis-triggered controlled release vesicles. 1506 28

Poly(epsilon-caprolactone) (PCL) and its block copolymers with poly(ethylene glycol) (PEG) were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of ethylene glycol or PEG, using zinc metal as catalyst. The resulting polymers were characterized by various analytical techniques such as (1)H NMR, SEC, DSC, IR, X-ray, ESEM, and CZE. PCL/PEG copolymers with long PCL chains presented the same crystalline structure as PCL homopolymer, whereas PEG-bearing short PCL blocks retained the crystalline structure of PEG and exhibited an amphiphilic behavior in aqueous solutions. Degradation of PCL and PCL/PEG diblock and triblock copolymers was realized in a 0.13 M, pH 7.4 phosphate buffer at 37 degrees C. The results indicated that the copolymers exhibited higher hydrophilicity and degradability compared with the PCL homopolymer. Large amounts of PEG were released from the bulk after 60 weeks' degradation. In vitro cell culture studies were conducted on scaffolds manufactured via solid free form fabrication by using primary human and rat bone marrow derived stromal cells (hMSC, rMSC). Light, scanning electron, and confocal laser microscopy, as well as immunocytochemistry, showed cell attachment, proliferation, and extracellular matrix production on the surface, as well as inside the scaffold architecture. Copolymers showed better performance in the cell culture studies than the PCL homopolymer.
...
PMID:Degradation and cell culture studies on block copolymers prepared by ring opening polymerization of epsilon-caprolactone in the presence of poly(ethylene glycol). 1512 88

In this study, we prepared diblock copolymers of poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) (PEG) by aluminum alkoxide catalysts. The biological responses to the spin cast surface of different PCL/PEG diblock copolymers were investigated in vitro. Our results showed that surface hydrophilicity improved with the increased PEG segments in diblock copolymers and that bacteria adhesion was inhibited by increased PEG contents. PCL-PEG 23:77 showed nanotopography on the surface. The number of adhered endothelial cells, platelets and monocytes on diblock copolymer surfaces was inhibited in PCL-PEG 77:23 and enhanced in PCL-PEG 23:77. Nevertheless, the platelet and monocyte activation on PCL-PEG 23:77 was reduced. PCL-PEG 23:77 had better cellular response as well as lower degree of platelet and monocyte activation. The current study was the first one to demonstrate that surface nanotopography could influence not only cell adhesion and growth but also platelet and monocyte activation.
...
PMID:Biocompatibility of poly(epsilon-caprolactone)/poly(ethylene glycol) diblock copolymers with nanophase separation. 1515 75


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>

---