Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:2.7.10.1 (ERK)
 95,504 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

With this tissue engineering (TE) technique, the peripheral pulmonary artery was successfully reconstructed, using the patient's own venous cells in a 4-year-old girl, 2 years after Fontan procedure. A 4-year-old girl was given a diagnosis of single right ventricle, double-outlet right ventricle and pulmonary atresia. She underwent left modified Blalock-Taussig shunt at a month old, pulmonary artery angioplasty at a year and 3 months old, and bidirectional cavopulmonary shunt at 2 years and a month old. She underwent again pulmonary artery angioplasty and Fontan operation at 3 years and 3 months. An angiographical examination 7 months after the operation revealed total occlusion of the right intermediate pulmonary artery. TE technique using autologous cells was indicated. The application of this procedure was approved by the ethical committee in Tokyo Women's Medical University. The patient's parents were thoroughly informed and signed a consent form. Approximately 2 cm of the peripheral vein was explanted under sterile conditions. The tissue was minced, placed in tissue culture dishes and cultured at 37 degrees C, 100% humidity and a 5% CO2 atmosphere for almost a month. The number of cells substantially increased to reach 12 millions for almost a month. The culture medium was changed every 3 days. The polymer tube that served as a scaffold for cells was composed of the copolymer of PCL-PLA (50:50) with reinforcement by woven PGA. The polymer conduit, 10 mm in diameter, 20 mm in length and 1 mm in thickness, was designated to biodegradate within 8 weeks. The number of seeded cells was approximately a million/cm2. The graft transplantation was performed 10 days after seeding cells. The occlusive right intermediate pulmonary artery was reconstructed with the TE vessel graft under extracorporeal circulation with a pump-oxygenator. The patient followed a satisfactory postoperative course. The postoperative angiography demonstrated that the graft was not constricted and dilated but that it preserved good patency. Long-term follow-up are necessary. We plan to continue to use the TE technique using autologous cells in the low pressure system like venous or pulmonary circulation. Because our results even in early experimental phase were valuable and promising, we believe that the TE approach may play an important role in the near future as an another alternative, together with transplantation and artificial organ, especially in the field of cardiovascular surgery that mostly needs replants.
 ...
PMID:[First successful clinical application of tissue engineered blood vessel]. 1199 17

Heme oxygenase-1 (HO-1) is induced as a beneficial and adaptive response in cells and tissues exposed to oxidative stress. Herein we examined how various eicosanoids affect the induction of HO-1, and the possible mechanism underlying 15-deoxy-Delta(12,14)- prostaglandin J(2) (15d-PGJ(2))-induced HO-1 expression. PGH(2), PGD(2) and its metabolites of the PGJ(2) series, and PGA(1) markedly induced the protein expression of HO-1. Arachidonic acid (AA), docosahexaenoic acid (DHA), PGE(2), PGF(2 alpha), and thromboxane B(2) (TXB(2)) were shown to have no effect on the induction of HO-1. 15d-PGJ(2) was the most potent activator achieving significance at 5 microM. Although 15d-PGJ(2) significantly activated the MAPKs of JNK and ERK, the activation of JNK and ERK did not contribute to the induction of HO-1 as determined using transfection of dominant-negative plasmids and MAPKs inhibitors. Additional experiment indicated that 15d-PGJ(2) induced HO-1 expression through peroxisome proliferator-activated receptor (PPAR)-independent pathway. 15d-PGJ(2) significantly decreased the intracellular level of reduced glutathione; and the thiol antioxidant, N-acetyl-L-cysteine (NAC), and the thiol-reducing agent, dithiothreitol (DTT), inhibited the induction of HO-1 by 15d-PGJ(2). Finally, NAC and DTT exhibited significant inhibition of HO-1 mRNA and HO-1 promoter reporter activity induced by 15d-PGJ(2). These results suggest that thiol antioxidant and reducing agents attenuate the expression of HO-1 induced by 15d-PGJ(2), and that the cellular thiol-disulfide redox status may be linked to HO-1 activation.
 ...
PMID:Thiol antioxidant and thiol-reducing agents attenuate 15-deoxy-delta 12,14-prostaglandin J2-induced heme oxygenase-1 expression. 1499 22

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.
 ...
PMID:Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization. 1546 60

Recent advances in the synthesis of poly(gamma-butyrolactone) have yielded homopolymers of up to 50,000 Mw from the low-cost monomer gamma-butyrolactone. This monomer has for the better part of a century been thought impossible to polymerise. Poly(gamma-butyrolactone) displays properties that are ideal for tissue-engineering applications and the bacterially derived equivalent, poly(4-hydroxybutyrate) (P4HB), has been evaluated for such uses. The glass transition temperature (-48 to -51 degrees C), melting point (53-60 degrees C), tensile strength (50 MPa), Young's modulus (70 MPa) and elongation at break (1000%) of P4HB make it a very useful biomaterial. Poly(gamma-butyrolactone) degrades to give gamma-hydroxybutyric acid which is a naturally occurring metabolite in the body and it has been shown to be bioresorbable. Investigation into the synthesis of poly(gamma-butyrolactone) has recently produced homo-oligomeric diols 400-1000 Mw that are suitable for reacting with diisocyanates to form polyurethanes. Biodegradable polyurethanes made from diols of polyglycolide (PGA) and poly(epsilon-caprolactone) (PCL) have the disadvantage of high glass transition and slow degradation, respectively. Poly(gamma-butyrolactone) can be thought of as being the missing link in the biodegradable polyester family immediately between PGA and PCL and displaying intermediate properties.
 ...
PMID:Chemosynthesis of bioresorbable poly(gamma-butyrolactone) by ring-opening polymerisation: a review. 1562 25

A series of copolymers with various compositions were synthesized by bulk ring-opening polymerization of glycolide and epsilon-caprolactone, using stannous (II) octoate or zirconium (IV) acetylacetonate as initiator. Reaction time and temperature were varied so as to induce different chain microstructures. The resulting copolymers were characterized by (1)H NMR, SEC, DSC, and X-ray diffraction. The average lengths of glycolyl (L(G)) and caproyl sequences (L(C)) and the degree of randomness (R) were calculated and compared to the values of completely random chains. The concentration of CGC sequences was also obtained which resulted from transesterification reactions. Data showed that stannous (II) octoate leads to less transesterification than zirconium (IV) acetylacetonate, and lower temperatures lead to less transesterification than higher ones. The copolymers exhibited a more or less blocky chain structure because of the reactivity difference between glycolide and epsilon-caprolactone. The crystalline structure and thermal properties depend on both the composition and the chain microstructure. PGA- and PCL-type crystallites were obtained for copolymers with intermediate compositions.
 ...
PMID:Structure-property relationships of copolymers obtained by ring-opening polymerization of glycolide and epsilon-caprolactone. Part 1. Synthesis and characterization. 1563 56

Thin films of biodegradable polymeric materials, poly(epsilon-caprolactone) (PCL) and poly(glycolic acid) (PGA) were micro-patterned using a Ti-sapphire femtosecond pulsed laser and ArF excimer UV laser in ambient conditions. The laser-patterned polymers were characterized using a scanning electron microscope (SEM), Fourier transform infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). In-vitro degradation tests were performed and the laser-patterned samples showed to be within one standard deviation of the control samples. Our results demonstrate that both lasers are excellent tools for micro-patterning biodegradable polymers since the bulk properties of the material can remain intact and because the direct-write method is rapid, flexible, and a chemical-free process.
 ...
PMID:Direct micro-patterning of biodegradable polymers using ultraviolet and femtosecond lasers. 1595 Feb 79

Signaling by stem cell factor and Kit, its receptor, plays important roles in gametogenesis, hematopoiesis, mast cell development and function, and melanogenesis. Moreover, human and mouse embryonic stem cells express Kit transcripts. Stem cell factor exists as both a soluble and a membrane-bound glycoprotein while Kit is a receptor protein-tyrosine kinase. The complete absence of stem cell factor or Kit is lethal. Deficiencies of either produce defects in red and white blood cell production, hypopigmentation, and sterility. Gain-of-function mutations of Kit are associated with several human neoplasms including acute myelogenous leukemia, gastrointestinal stromal tumors, and mastocytomas. Kit consists of an extracellular domain, a transmembrane segment, a juxtamembrane segment, and a protein kinase domain that contains an insert of about 80 amino acid residues. Binding of stem cell factor to Kit results in receptor dimerization and activation of protein kinase activity. The activated receptor becomes autophosphorylated at tyrosine residues that serve as docking sites for signal transduction molecules containing SH2 domains. The adaptor protein APS, Src family kinases, and Shp2 tyrosyl phosphatase bind to phosphotyrosine 568. Shp1 tyrosyl phosphatase and the adaptor protein Shc bind to phosphotyrosine 570. C-terminal Src kinase homologous kinase and the adaptor Shc bind to both phosphotyrosines 568 and 570. These residues occur in the juxtamembrane segment of Kit. Three residues in the kinase insert domain are phosphorylated and attract the adaptor protein Grb2 (Tyr703), phosphatidylinositol 3-kinase (Tyr721), and phospholipase Cgamma (Tyr730). Phosphotyrosine 900 in the distal kinase domain binds phosphatidylinositol 3-kinase which in turn binds the adaptor protein Crk. Phosphotyrosine 936, also in the distal kinase domain, binds the adaptor proteins APS, Grb2, and Grb7. Kit has the potential to participate in multiple signal transduction pathways as a result of interaction with several enzymes and adaptor proteins.
 ...
PMID:Signaling by Kit protein-tyrosine kinase--the stem cell factor receptor. 1612 12

Lnk, with APS and SH2-B (Src homology 2-B), belongs to a family of SH2-containing proteins with potential adaptor functions. Lnk regulates growth factor and cytokine receptor-mediated pathways implicated in lymphoid, myeloid, and platelet homeostasis. We have previously shown that Lnk is expressed and up-regulated in vascular endothelial cells (ECs) in response to tumor necrosis factor-alpha (TNFalpha). In this study, we have shown that, in ECs, Lnk down-regulates the expression, at both mRNA and protein levels, of the proinflammatory molecules VCAM-1 and E-selectin induced by TNFalpha. Mechanistically, our data indicated that, in response to TNFalpha, NFkappaB/p65 phosphorylation and translocation as well as IkappaBalpha phosphorylation and degradation were unchanged, suggesting that Lnk does not modulate NFkappaB activity. However, Lnk activates phosphatidylinositol 3-kinase (PI3K) as reflected by Akt phosphorylation. Our results identify endothelial nitric-oxide synthase as a downstream target of Lnk-mediated activation of the PI3K/Akt pathway and HO-1 as a new substrate of Akt. We found that sustained Lnk-mediated activation of PI3K in TNFalpha-activated ECs correlated with the inhibition of ERK1/2 phosphorylation, whereas phosphorylation of p38 and c-Jun NH(2)-terminal kinase (JNK) mitogen-activated protein kinases (MAPKs) was unchanged. ERK1/2 inhibition decreases VCAM-1 expression in TNFalpha-treated ECs. Collectively, our results identify the adaptor Lnk as a negative regulator in the TNFalpha-signaling pathway mediating ERK inhibition and suggest a role for Lnk in the interplay between PI3K and ERK triggered by TNFalpha in ECs.
 ...
PMID:The adaptor molecule Lnk negatively regulates tumor necrosis factor-alpha-dependent VCAM-1 expression in endothelial cells through inhibition of the ERK1 and -2 pathways. 1664 35

The most common synthetic biodegradable polymers being investigated for tissue engineering applications are FDA approved, clinically used poly(alpha-hydroxy esters). To better assess the applicability of the electrospinning technology for scaffold fabrication, six commonly used poly(alpha-hydroxy esters) were used to prepare electrospun fibrous scaffolds, and their physical and biological properties were also characterized. Our results suggest that specific, optimized fabrication parameters are required for each polymer to produce scaffolds that consist of uniform structures morphologically similar to native extracellular matrix. Scanning electron microscopy (SEM) revealed a highly porous, three-dimensional structure for all scaffolds, with average fiber diameter ranging from 300nm to 1.5microm, depending on the polymer type used. The poly(glycolic acid) (PGA) and poly(d,l-lactic-co-glycolic acid 50:50) (PLGA5050) fibrous structures were mechanically stiffest, whereas the poly(l-lactic acid) (PLLA) and poly(epsilon-caprolactone) (PCL) scaffolds were most compliant. Upon incubation in physiological solution, severe structural destruction due to polymer degradation was found in the PGA, poly(d,l-lactic acid) (PDLLA), PLGA5050, and poly(d,l-lactic-co-glycolic acid 85:15) (PLGA8515) fibrous scaffolds, whereas PLLA and PCL fibrous scaffolds maintained a robust scaffold structure during the same time period, based on macroscopic and SEM observations. In addition, PLLA scaffolds supported the highest rate of proliferation of seeded cells (chondrocytes and mesenchymal stem cells) than other polymeric scaffolds. Our findings showed that PLLA and PCL based fibrous scaffolds exhibited the most optimal structural integrity and supported desirable cellular response in culture, suggesting that such scaffolds may be promising candidate biomaterials for tissue engineering applications.
 ...
PMID:Fabrication and characterization of six electrospun poly(alpha-hydroxy ester)-based fibrous scaffolds for tissue engineering applications. 1676 78

Insulin receptor substrate (IRS)-1 and IRS-2 have dominant roles in the action of insulin, but other substrates of the insulin receptor kinase, such as Gab1, c-Cbl, SH2-B and APS, are also of physiological relevance. Although the protein downstream of tyrosine kinases-1 (Dok1) is known to function as a multisite adapter molecule in insulin signaling, its role in energy homeostasis has remained unclear. Here we show that Dok1 regulates adiposity. Expression of Dok1 in white adipose tissue was markedly increased in mice fed a high-fat diet, whereas adipocytes lacking this adapter were smaller and showed a reduced hypertrophic response to this dietary manipulation. Dok1-deficient mice were leaner and showed improved glucose tolerance and insulin sensitivity compared with wild-type mice. Embryonic fibroblasts from Dok1-deficient mice were impaired in adipogenic differentiation, and this defect was accompanied by an increased activity of the protein kinase ERK and a consequent increase in the phosphorylation of peroxisome proliferator-activated receptor (PPAR)-gamma on Ser112. Mutation of this negative regulatory site for the transactivation activity of PPAR-gamma blocked development of the lean phenotype caused by Dok1 ablation. These results indicate that Dok1 promotes adipocyte hypertrophy by counteracting the inhibitory effect of ERK on PPAR-gamma and may thus confer predisposition to diet-induced obesity.
 ...
PMID:Dok1 mediates high-fat diet-induced adipocyte hypertrophy and obesity through modulation of PPAR-gamma phosphorylation. 1820 60


<< Previous 1 2 3 4 5 6 7 Next >>