Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: EC:2.4.1.14 (SPS)
 813 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Nanostructured polyelectrolyte multilayer thin films electrostatically assembled alternately from such polymers as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) were investigated for their in vitro cell interactions. Not surprisingly, NR6WT cells, a highly adhesive murine fibroblast cell line, attached to many different multilayer combinations tested. However, PAH/PAA multilayers constructed at pH deposition conditions of 2.0/2.0 were completely bioinert. Analogous cell interactions were observed with PAH/poly(methacrylic acid) (PAH/PMA), PAH/sulfonated poly(styrene) (PAH/SPS), and poly(diallyldimethylammonium chloride)/SPS (PDAC/SPS) systems, thereby suggesting a general trend in the fibroblasts' response to multilayers. Specifically, highly ionically stitched films attracted cells, whereas weakly ionically cross-linked multilayers, which swell substantially in physiological conditions to present richly hydrated surfaces, resisted fibroblast attachment. Thus, by manipulating the multilayer pH or ionic strength assembly conditions or both, which in turn dictate the molecular architecture of the thin films, one may powerfully direct a single multilayer combination to be either cell adhesive or cell resistant.
 ...
PMID:Rational design of cytophilic and cytophobic polyelectrolyte multilayer thin films. 1252 53

This paper presents novel methods to produce arrays of lipid bilayers and liposomes on patterned polyelectrolyte multilayers. We created the arrays by exposing patterns of poly(dimethyldiallylammonium chloride) (PDAC), polyethylene glycol (m-dPEG) acid, and poly(allylamine hydrochloride) (PAH) on polyelectrolyte multilayers (PEMs) to liposomes of various compositions. The resulting interfaces were characterized by total internal reflection fluorescence microscopy (TIRFM), fluorescence recovery after pattern photobleaching (FRAPP), quartz crystal microbalance (QCM), and fluorescence microscopy. Liposomes composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-phosphate (monosodium salt) (DOPA) were found to preferentially adsorb on PDAC and PAH surfaces. On the other hand, liposome adsorption on sulfonated poly(styrene) (SPS) surfaces was minimal, due to electrostatic repulsion between the negatively charged liposomes and the SPS-coated surface. Surfaces coated with m-dPEG acid were also found to resist liposome adsorption. We exploited these results to create arrays of lipid bilayers by exposing PDAC, PAH and m-dPEG patterned substrates to DOPA/DOPC vesicles of various compositions. The patterned substrates were created by stamping PDAC (or PAH) on SPS-topped multilayers, and m-dPEG acid on PDAC-topped multilayers, respectively. This technique can be used to produce functional biomimetic interfaces for potential applications in biosensors and biocatalysis, for creating arrays that could be used for high-throughput screening of compounds that interact with cell membranes, and for probing, and possibly controlling, interactions between living cells and synthetic membranes.
 ...
PMID:Arrays of lipid bilayers and liposomes on patterned polyelectrolyte templates. 1679 Feb 45

We report on spatial control of nanoporosity in polyelectrolyte multilayer (PEM) films using photopatterning and its effects on film optical and adsorption properties. Multilayers assembled from poly(acrylic acid-ran-vinylbenzyl acrylate) (PAArVBA), a photo-cross-linking polymer, and poly(allylamine hydrochloric acid) (PAH) were patterned using ultraviolet light followed by immersion in low pH and then neutral pH solutions to induce nanoporosity in unexposed regions. Model charged small molecules rhodamine B, fluorescein, and propidium iodide and the model protein albumin exhibit increased adsorption to nanoporous regions of patterned PEM films as shown by fluorescence microscopy and radiolabeling experiments. Films assembled with alternating stacks of PAH/poly(sodium-4-styrene sulfonate) (SPS), which do not become nanoporous, and stacks of PAH/PAArVBA were patterned to create nanoporous capillary channels. Interdigitated channels demonstrated simultaneous, separate wicking of dimethyl sulfoxide-solvated fluorescein and rhodamine B. In addition, these heterostack structures exhibited patternable Bragg reflectivity of greater than 25% due to refractive index differences between the nanoporous and nonporous stacks. Finally, the PEM assembly process coupled with photo-cross-linking was used to create films with two separate stacked reflective patterns with a doubling in reflectivity where patterns overlapped. The combined adsorptive and reflective properties of these films hold promise for applications in diagnostic arrays and therapeutics delivery.
 ...
PMID:Photopatterned nanoporosity in polyelectrolyte multilayer films. 1831 57

Cationic contact-killing is an important strategy for creating antimicrobial surfaces that prevent viable bacteria attachment. Recent studies have shown that highly swollen, compliant surfaces resist bacterial attachment and a sufficient density of mobile cationic charge can effectively disrupt bacterial cell membranes. Polyelectrolyte multilayers (PEMs), a popular coating system for surface modification, have been used to kill bacteria through the incorporation of contact-killing or leaching biocides. In this work, we show that manipulation of multilayer assembly and postassembly conditions (e.g., pH) to expose mobile cationic charge can create antimicrobial PEMs without the addition of specific biocidal species. As a model system, we explored PEMs comprising poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrene sulfonate) (SPS) assembled at high pH and subsequently immersed in low pH solutions. This system undergoes a reversible pH-dependent swelling transition, and we demonstrate that antimicrobial functionality at physiological pH conditions can be turned on and off with suitable pH treatment. In both airborne and waterborne bacteria assays, the viability of two strains of Gram positive Staphylococcus epidermidis (S. epidermidis), one biofilm forming and one nonbiofilm forming, and two strains of Gram negative Escherichia coli (E. coli) was effectively reduced on SPS/PAH multilayers displaying accessible cationic charge. To generalize our results, the pH assembly conditions of PEMs comprising poly(acrylic acid) (PAA) and PAH were also modified to introduce antibacterial capabilities.
 ...
PMID:Polyelectrolyte multilayers with intrinsic antimicrobial functionality: the importance of mobile polycations. 1931 89

It is demonstrated that poly(allylamine hydrochloride)/poly(styrenesulfonate) (PAH/SPS) multilayer films can be successfully tailored for the capture and detection of small biomolecules in dilute concentrations. Based on in vitro results, these films could be potentially applied for rapid and high-throughput diagnosis of dilute biomarkers in serum or tissue. PAH presents functional amino groups that can be further reacted with desired chemistries in order to create customizable and specific surfaces for biomolecule capture. A variety of film assembly characteristics were tested (pH, molecular weight of PAH, and ionic strength) to tune the biotinylation and swelling behavior of these films to maximize detection capabilities. The resultant optimized biotinylated PAH/SPS 9.3/9.3 system was utilized in conjunction with quantum dots (Qdots) to capture and detect a dilute biomarker for prostate cancer, prostate-specific antigen (PSA). Compared to previous work, our system presents a good sensitivity for PSA detection within the clinically relevant range of 0.4-100 ng/mL.
...
PMID:Optimization of amine-rich multilayer thin films for the capture and quantification of prostate-specific antigen. 2590 61

Cell backpacks, or micron-scale patches of a few hundred nanometers in thickness fabricated by layer-by-layer (LbL) assembly, are potentially useful vehicles for targeted drug delivery on the cellular level. In this work, echogenic liposomes (ELIPs) containing the anticancer drug doxorubicin (DOX) are embedded into backpacks through electrostatic interactions and LbL assembly. Poly(allylamine hydrochloride)/poly(acrylic acid) (PAH/PAA)n , and poly(diallyldimethylammonium chloride)/poly(styrene sulfonate) (PDAC/SPS)n film systems show the greatest ELIP incorporation of the films studied while maintaining the structural integrity of the vesicles. The use of ELIPs for drug encapsulation into backpacks facilitates up to three times greater DOX loading compared to backpacks without ELIPs. Cytotoxicity studies reveal that monocyte backpack conjugates remain viable even after 72 h, demonstrating promise as drug delivery vehicles. Because artificial vesicles can load many different types of drugs, ELIP containing backpacks offer a unique versatility for broadening the range of possible applications for cell backpacks.
...
PMID:Liposome-Loaded Cell Backpacks. 2661 71